Honda NSX Import Ireland: Buyer's Guide


Japanese NA1, NA2 and NC1 generations, VTEC engines, hybrid SH-AWD, factory grades, import costs and ownership.

From the original aluminium-bodied NA1 and 3.2-litre NA2 to the hybrid NC1, explore the Japanese Type R, Type S, Type S Zero, Type T and final limited-production editions.

The Honda NSX arrived in Japan in September 1990 with an engineering approach that challenged established ideas about high-performance sports cars. Its lightweight aluminium monocoque, mid-mounted 3.0-litre C30A VTEC V6 and rear-wheel-drive layout combined high-revving performance with everyday usability. The original NA1 evolved through increasingly specialised factory versions, beginning with the lightweight Type R in 1992 and followed by the open-roof Type T in 1995. A major mechanical revision in 1997 introduced the 3.2-litre C32B engine and six-speed manual gearbox, creating the NA2, alongside the Type S and more focused Type S Zero. Honda continued refining the platform until December 2005, including the fixed-headlight facelift and second Type R introduced in 2002.


The NSX returned to the Japanese market in February 2017 as the NC1, replacing the naturally aspirated VTEC formula with a completely different approach to supercar engineering. Its mid-mounted 3.5-litre twin-turbocharged V6 worked with three electric motors, a nine-speed dual-clutch transmission and Honda's Sport Hybrid SH-AWD system. Two independently controlled front motors enabled torque vectoring, while a third motor supported the rear drivetrain. The result was an all-wheel-drive hybrid developed around instantaneous response and precise vehicle control. Honda continued refining the NC1 before introducing the limited-production Type S, announced in 2021 and released in Japan in 2022, with just 30 examples allocated to the domestic market.

Put an original NA1 beside an NC1 and the difference goes well beyond their appearance. The original NA series concentrates on low weight, mechanical feedback and naturally aspirated VTEC performance, while the NC series uses electrification and sophisticated drivetrain control to achieve its handling objectives. Within each generation, factory specifications also matter. An early NA1, NA2 Type S Zero, later Type R and NC1 Type S differ substantially in engineering, equipment and collector appeal. This guide examines those Japanese-market distinctions, including engines, transmissions, factory grades, special editions, current Japanese retail prices and the practical considerations involved in importing an NSX into Ireland.

The evolution of the Honda NSX

How Honda transformed the NSX from an aluminium VTEC sports car into a three-motor hybrid supercar


The Honda NSX began as an attempt to rethink how a mid-engined supercar should be engineered and driven. When the original NA1 arrived in Japan in September 1990, Honda combined the world's first mass-produced all-aluminium monocoque with a transversely mounted 3.0-litre C30A VTEC V6. The objective extended beyond reducing weight. Honda wanted the precision and performance of a serious sports car without the poor visibility, awkward controls and demanding driving characteristics often associated with contemporary supercars.

Its double-wishbone suspension, aluminium chassis components and carefully positioned cabin established a strong foundation, but Honda continued developing the NSX rather than treating the original design as finished. The first Type R appeared in November 1992, removing approximately 120 kg through lighter equipment, revised suspension and a more focused interior. It demonstrated how much additional performance Honda could extract without substantially changing engine output.

The range subsequently developed in another direction. The removable-roof Type T arrived in March 1995, accompanied by electronic throttle control and improvements to the automatic transmission. Honda was expanding the NSX's capabilities while preserving the mid-engined layout and naturally aspirated engine that defined its character.

February 1997 brought the most significant mechanical revision of the first generation. Manual models received the larger 3.2-litre C32B VTEC engine and a six-speed gearbox, while automatic versions retained the 3.0-litre engine. The new Type S introduced a lighter, more sporting specification without abandoning everyday comfort, while Type S Zero went further with weight reduction and circuit-oriented suspension tuning.

Honda continued refining the NA platform into the following decade. The December 2001 facelift replaced the original pop-up headlights with fixed units, revised aerodynamics and introduced new wheel and tyre specifications.  

In May 2002, the second NSX-R arrived with extensive weight-saving measures and aerodynamic development, proving that the aluminium chassis still had considerable potential twelve years after its introduction. Production finally ended in December 2005.

When the NSX returned to Japan in February 2017, Honda had abandoned almost every major element of the original drivetrain. The NC1 retained the mid-engined, two-seat concept but introduced a longitudinally mounted 3.5-litre twin-turbocharged V6, three electric motors and a nine-speed dual-clutch transmission. Its multi-material spaceframe replaced the original aluminium monocoque, while Sport Hybrid SH-AWD introduced electrically controlled front-wheel torque vectoring.

This changed the way the NSX generated cornering performance. Instead of relying entirely on mechanical grip, weight distribution and suspension tuning, the NC1 could actively vary the driving and braking torque at each front wheel. Its electric motors also provided immediate response alongside the turbocharged V6.

Honda refined the system further for the updated model released in Japan in May 2019, revising suspension components, tyres, steering assistance and electronic drivetrain controls. The final Type S, announced in August 2021 and released in Japan in July 2022, introduced increased hybrid-system output, wider tracks and revised aerodynamics, with just 30 examples allocated to Japan.

The original NSX became more capable through weight reduction, engine development and suspension tuning. The NC1 took another route, using electric motors to control how power reached individual wheels. Both were built around the driver, but they achieve their performance in very different ways.

Honda NSX NA series

Honda NSX NA series (September 1990–December 2005)


The Honda NSX NA series entered the Japanese market in September 1990, introducing a mid-engined sports car built around an all-aluminium monocoque and a transversely mounted 2,977 cc C30A VTEC V6. Its 280 PS engine, five-speed manual gearbox and rear-wheel-drive layout were developed to deliver precise handling without sacrificing the visibility, comfort and everyday usability Honda considered essential. Double-wishbone suspension at all four corners, aluminium suspension components and careful weight distribution established the mechanical foundation that remained throughout the original NSX's production life.

Honda began developing more specialised versions almost immediately. The first Type R arrived in November 1992, reducing weight by approximately 120 kg through the removal of equipment, lighter components and extensive chassis tuning. The range subsequently expanded in March 1995 with the removable-roof Type T, while revisions to electronic throttle control and the automatic transmission improved the road-going specifications.

The most substantial powertrain change came in February 1997. Manual models gained the larger 3,179 cc C32B VTEC engine and six-speed gearbox, establishing the NA2 chassis designation. 

Automatic models continued using the 3.0-litre C30A and NA1 designation. Honda also introduced Type S and Type S Zero, creating a distinction between a lighter road-focused sports car and a considerably more uncompromising circuit-oriented specification.

Development continued into the final production years. The December 2001 facelift replaced the original retractable headlights with fixed projector units, revised aerodynamics and introduced 17-inch wheels at both ends. In May 2002, Honda revived the Type R with carbon-fibre aerodynamic components, specialised suspension tuning and further weight reduction. The exceptionally rare NSX-R GT followed in 2005 as a homologation derivative.

Despite these revisions, Honda never replaced the NA platform during its fifteen-year production run. The earliest NA1 and final NA2 models share the same fundamental engineering philosophy, but differ considerably in engine specification, transmission, chassis development and factory purpose.


Current Japanese Retail Price: Around ¥9,000,000–¥60,000,000+ (approximately €50,800–€338,700+ / $57,000–$379,800+). The Japanese NSX market covers a particularly broad range of specifications and collector values. Earlier NA1 automatics and higher-mileage standard cars generally provide the more accessible entry points, while original manual NA1 examples, later NA2 models and desirable factory colours command stronger prices. Type S and Type S Zero attract specialist interest, with both generations of Type R occupying the upper end of the market. Originality, documented maintenance, accident history and evidence of professional restoration can significantly influence asking prices. Exceptionally rare specifications may exceed the normal range, and advertised values should always be distinguished from completed sales.

Import cost considerations: Establish whether the car is an NA1 or NA2, its original engine and transmission, production year and factory grade before estimating Irish import costs. The distinction between 3.0-litre automatic and 3.2-litre manual specifications is particularly relevant. NSX examples more than 30 years old may qualify for Ireland's vintage VRT category, which carries a flat €200 charge. Eligibility depends on the vehicle's age and the applicable Revenue requirements. Newer examples are assessed under the relevant VRT rules. Shipping, customs duty, VAT, vehicle condition and specialist maintenance costs must also be considered.

Engine output: The original 2,977 cc C30A was rated at 280 PS at 7,300 rpm and 30.0 kg-m (approximately 294 Nm) at 5,400 rpm with the five-speed manual. Early four-speed automatic versions produced 265 PS at 6,800 rpm and 30.0 kg-m at 5,400 rpm. From February 1997, the 3,179 cc C32B produced 280 PS at 7,300 rpm and 31.0 kg-m (approximately 304 Nm) at 5,300 rpm. Type S, Type S Zero and the later NA2 Type R retained the officially rated 280 PS output.

Engine: Two naturally aspirated, transversely mounted V6 engines defined the Japanese NA series. The original C30A displaced 2,977 cc and featured DOHC VTEC, titanium connecting rods and Honda's PGM-FI fuel injection. The 1997 C32B increased displacement to 3,179 cc through a larger cylinder bore and was paired exclusively with the six-speed manual. Both engines used belt-driven camshafts and high-revving VTEC valve control. Automatic NSX models retained the C30A throughout production, making transmission choice essential when identifying the engine fitted to a particular car.

Best for: Enthusiasts seeking a naturally aspirated, mid-engined Honda with direct mechanical feedback and historical significance. Standard manual models suit regular driving, Type T offers open-roof motoring, while Type S, Type S Zero and Type R appeal to drivers seeking increasingly specialised factory chassis development.

Body style: Two-door, two-seat, mid-engined sports car with an aluminium monocoque body. The regular NSX and performance-focused Type R, Type S and Type S Zero used a fixed-roof coupe configuration. Type T introduced a removable roof panel in 1995, requiring additional body reinforcement. The standard body measured 4,430 mm long and 1,810 mm wide, with a 2,530 mm wheelbase. A separate luggage compartment behind the engine provided practical storage despite the mid-engined arrangement.

Drive: Rear-wheel drive throughout the Japanese NA series, with the V6 mounted transversely behind the passenger compartment. Honda used double-wishbone suspension at both axles, incorporating lightweight aluminium components to improve wheel control and reduce unsprung mass. Manual models employed a limited-slip differential, while traction-control equipment varied by grade and production period. Type R and Type S Zero received more specialised suspension tuning, and the 2002 NSX-R combined chassis changes with aerodynamic downforce. Unlike the later NC1, the original NSX had no electric front-wheel drive or hybrid torque-vectoring system.

Transmission: The original Japanese NSX offered a five-speed manual or four-speed conventional automatic, both paired with the 3.0-litre C30A. The 1995 revision introduced the electronically controlled F-Matic automatic system, allowing sequential gear selection. From February 1997, manual models received the 3.2-litre C32B and six-speed gearbox, while automatics continued with the 3.0-litre engine. Type R, Type S and Type S Zero were manual-only factory specifications. Type T could be ordered with either transmission, depending on production period. No dual-clutch or CVT transmission was offered in the NA series.

Notable features: The NA series introduced Honda's mass-produced aluminium monocoque, naturally aspirated VTEC V6 and four-wheel double-wishbone suspension. Significant developments included the lightweight 1992 Type R, removable-roof Type T, 1997 C32B and six-speed manual, Type S Zero, the 2001 fixed-headlight facelift and the aerodynamically developed 2002 NSX-R. The rare 2005 NSX-R GT represented the final competition-related development of the platform.


Why NA1 and NA2 mean more than an early or late NSX

One of the easiest mistakes when researching a Japanese Honda NSX is assuming that NA1 identifies every early car and NA2 every facelifted example.

The distinction actually relates to the engine and transmission configuration introduced during the February 1997 revision.

The original NA1 used Honda's 2,977 cc C30A VTEC engine with either a five-speed manual or four-speed automatic transmission. When Honda introduced the larger 3,179 cc C32B and six-speed manual gearbox, those vehicles received the NA2 chassis designation.

However, the company continued producing 3.0-litre automatics alongside the newer manual specification. Consequently, a 2003 NSX with fixed headlights and a four-speed automatic is still an NA1, while a 1998 six-speed manual is an NA2 despite retaining the earlier retractable headlights.

This also explains why the two chassis codes should not be used interchangeably with facelift dates or performance grades. An NA2 might be an ordinary coupe, Type T, Type S or the later Type R. The chassis code identifies its fundamental mechanical configuration, not necessarily its intended driving character.

The 1997 engine change itself was significant. The C32B's larger displacement provided additional torque while retaining the officially rated 280 PS output. The six-speed gearbox also offered closer ratios than the original five-speed, improving the ability to keep the VTEC engine within its preferred operating range.

When comparing NSXs in Japan, establish the chassis code, engine, transmission, factory grade and production period separately. These details reveal considerably more than the registration year or headlight design alone.


Japanese Honda NSX NA series grades

The Japanese NA-series NSX developed from a relatively simple coupe range into several distinct factory specifications. The original NSX formed the road-going foundation, initially available with either a five-speed manual or four-speed automatic transmission.

Type R introduced a lighter, more circuit-focused interpretation in 1992. Type T subsequently added removable-roof motoring, while the 1997 introduction of Type S and Type S Zero created two different approaches to driver-focused performance. The regular Type S retained more road-going equipment, whereas Type S Zero removed additional weight and adopted more specialised suspension tuning.

Honda revived Type R in 2002 with substantial aerodynamic development. The extremely rare NSX-R GT followed in 2005 as a homologation derivative.

Honda's Custom Order Plan also allowed buyers to specify particular exterior colours, interior finishes and equipment. These configurations should not be confused with separate mechanical grades, particularly when examining Japanese retail listings.


Type R 

The original NSX Type R was introduced in November 1992 as Honda's first Type R production model. Based on the NA1, it retained the 280 PS C30A VTEC engine and five-speed manual gearbox but reduced weight from approximately 1,350 kg to 1,230 kg. Honda removed or lightened numerous components, revised the suspension, changed the final-drive ratio and introduced specialised Recaro bucket seats. Championship White paint, red Honda badging and a distinctive lightweight interior became closely associated with the original NSX-R.

The second Type R arrived in May 2002, now based on the NA2 with the 3.2-litre C32B and six-speed manual. It introduced a carbon-fibre vented bonnet, lightweight carbon rear wing, revised aerodynamic balance and extensive chassis development. Its engine components received more precise factory balancing, while suspension and braking modifications were designed for demanding circuit driving. The two Type R periods are historically and mechanically distinct, making chassis identification, factory documentation and original equipment essential when assessing Japanese examples.


Type S

Introduced in February 1997, the NSX Type S occupied the space between the standard coupe and the more uncompromising Type S Zero. It used the 3,179 cc C32B VTEC producing 280 PS, paired exclusively with a six-speed manual gearbox. Honda reduced weight by approximately 45 kg compared with a coupe equipped with power steering, while fitting forged BBS wheels, Recaro bucket seats, a MOMO steering wheel and dedicated suspension tuning.

Type S was designed to deliver sharper handling and more immediate driver feedback without completely abandoning the NSX's road-going character. This distinguished it from Type S Zero, which removed more equipment in pursuit of reduced weight. Later Type S models benefited from the wider NSX development programme, including the fixed-headlight facelift and updated wheel and tyre specifications. Its factory seats, suspension, steering equipment and original interior should be checked carefully, especially where aftermarket modifications have altered the car's specification.


Type S Zero

The NSX Type S Zero appeared alongside Type S in February 1997 but pursued a considerably more specialised purpose. It retained the 3.2-litre C32B VTEC engine, 280 PS output and six-speed manual transmission while removing additional equipment to reduce weight. Honda removed the air conditioning, audio system and associated wiring, reduced sound insulation and fitted substantially firmer suspension. Other weight-saving measures included a lighter battery, single-mass flywheel and the deletion of electric power steering. Honda quoted a 96 kg reduction compared with a standard coupe equipped with power steering, bringing the Type S Zero to approximately 1,270 kg.

Unlike Type S, which balanced performance with road usability, Type S Zero prioritised mechanical response and driver feedback. Its suspension calibration, reduced insulation and stripped-back specification made it noticeably less accommodating for regular journeys. The Zero was offered during the pre-facelift NA2 period and should not be confused with the later 2002 NSX-R. Buyers should verify the original factory identity and equipment, as removing comfort features from an ordinary Type S does not create an authentic Type S Zero.


Type T

The NSX Type T was introduced in March 1995, giving Japanese buyers a removable-roof version of Honda's mid-engined sports car. Its detachable aluminium roof panel could be stored in a dedicated compartment, allowing open-air driving while retaining the underlying two-seat layout. Honda reinforced the body to compensate for the absence of a fixed roof structure, which added weight compared with the equivalent coupe. Electronic power steering and additional comfort equipment were part of its road-focused specification.

Early Type T models used the 3.0-litre C30A with five-speed manual or four-speed automatic transmission. Following the 1997 update, manual examples received the 3.2-litre C32B and six-speed gearbox, while automatic versions retained the C30A. This makes Type T one of the most varied NA-series grades mechanically. Buyers should examine the removable roof panel, seals, locking mechanisms and evidence of water ingress, alongside the usual NSX structural and mechanical checks. Its appeal is the combination of open-roof driving and Honda's original mid-engined VTEC architecture.


Base grade

The standard Honda NSX launched in Japan in September 1990, combining the 2,977 cc C30A VTEC engine with an aluminium monocoque, rear-wheel drive and four-wheel double-wishbone suspension. The five-speed manual produced 280 PS, while the four-speed automatic was rated at 265 PS. Compared with the later Type R and Type S models, the regular NSX retained more comfort equipment, including leather upholstery, electric seat adjustment, climate control and a Bose audio system in its original specification.

The base model evolved considerably during production. Revised wheels and brakes arrived in 1994, followed by electronic throttle control and F-Matic automatic operation in 1995. The 1997 introduction of the C32B created the six-speed manual NA2, while automatic models remained NA1. Later examples received revised aerodynamics, fixed headlights and additional equipment. For someone seeking the original NSX experience without prioritising a rare factory edition, a well-maintained standard manual offers much of the fundamental engineering character. Condition, service history and originality should determine whether an individual example represents a worthwhile purchase.


NSX-R GT

The NSX-R GT was introduced in 2005 as an exceptionally rare homologation derivative associated with Honda's Japanese GT racing programme. Based on the NA2 NSX-R, it retained the naturally aspirated 3,179 cc C32B VTEC engine and six-speed manual transmission. Its most recognisable features were extensively revised carbon-fibre bodywork, enlarged aerodynamic components and a prominent roof-mounted intake scoop. Honda records just five NSX-R GTs built in 2005 for homologation purposes. This production figure should not be confused with the number of cars subsequently sold to customers.

The NSX-R GT was not a conventional performance upgrade or an additional regular-production grade. Its purpose was to homologate aerodynamic bodywork for competition, and its mechanical specification remained closely related to the road-going NSX-R. Its extreme scarcity places it outside ordinary NSX buying considerations, making verified provenance essential. Buyers should distinguish an authentic factory NSX-R GT from a standard NSX-R fitted with replica aerodynamic components. Original documentation and confirmation of the vehicle's factory identity are indispensable before any assessment of collectability or value.

Honda NSX NC1 series

Honda NSX NC1 series (February 2017–October 2022)


Japanese sales of the second-generation Honda NSX began on 27 February 2017. Although it shared the original car's two-seat, mid-engined layout, the NC1 used a different drivetrain altogether. Its 3,492 cc twin-turbocharged V6 drove the rear wheels through a nine-speed dual-clutch transmission, supported by a rear electric motor. Two further electric motors drove the front wheels independently, giving the NC1 all-wheel drive without a conventional mechanical connection between the front and rear axles.

The standard Japanese NSX produced a combined 581 PS and 646 Nm, with the petrol engine contributing 507 PS and 550 Nm. A direct-drive electric motor supported the rear powertrain, while two independently controlled front motors provided additional traction and active torque vectoring. This arrangement allowed Honda to vary the driving and braking forces at each front wheel, improving cornering response in ways unavailable to the mechanically driven NA series.

The aluminium-intensive, multi-material spaceframe replaced the original aluminium monocoque. Double-wishbone front suspension, a multi-link rear arrangement, adaptive dampers and four selectable driving modes gave the NC1 a broader operating range, from relatively quiet road driving to circuit use.

A significant update was announced in October 2018 for Japanese delivery from May 2019. Honda revised stabiliser stiffness, suspension bushes, rear hub rigidity, tyres and electronic control systems. The changes improved steering response and vehicle balance without increasing the original 581 PS system output.

The final Type S was announced in August 2021 and released in Japan in July 2022. Limited to 30 Japanese-market vehicles, it increased combined output to 610 PS and 667 Nm through revised turbochargers, improved cooling and changes to the hybrid system. Wider tracks, dedicated tyres, revised suspension control and new aerodynamics further developed the NC1's handling.

Unlike the original NSX, which offered several performance grades, the Japanese NC1 had only two confirmed factory grades: the regular NSX and the final Type S.


Current Japanese Retail Price: Indicatively around ¥23,000,000–¥60,000,000+ (approximately €130,200–€339,700+ / $145,700–$380,000+). Japanese asking prices reflect the considerable differences between regular-production NC1 models and the final limited Type S. Earlier cars with higher mileage generally occupy the lower end, while low-mileage examples, desirable factory colours and extensively optioned specifications command stronger prices. Carbon-ceramic brakes, carbon-fibre exterior components, interior packages and documented servicing can also influence values. The Japanese Type S allocation was exceptionally small, making advertised prices less representative of a normal retail market. Original factory specification, accident history, specialist maintenance and the condition of hybrid components should carry significant weight when assessing individual cars.

Import cost considerations: Establish the NC1 chassis identification, production year, original Japanese specification and emissions documentation before estimating Irish landed costs. The 3.5-litre petrol engine and hybrid drivetrain require careful assessment for VRT and other applicable registration charges. Shipping, customs duty, VAT and specialist inspection costs must be considered alongside the Japanese asking price. For Type S, factory documentation and confirmation of its limited-edition identity are particularly important. The availability of qualified hybrid-supercar servicing in Ireland should also be investigated before purchase.

Engine output: The standard Japanese NSX combined its 507 PS twin-turbocharged V6 and three electric motors for a total system output of 581 PS and 646 Nm. The 2022 Type S increased V6 output to 529 PS and 600 Nm, with total hybrid-system output rising to 610 PS and 667 Nm. These are combined system figures, not the arithmetic sum of the individual peak engine and motor ratings.

Engine: The NC1 used Honda's JNC 3,492 cc, 75-degree, twin-turbocharged V6 petrol engine, mounted longitudinally behind the passenger compartment. Its DOHC 24-valve arrangement, direct and port fuel injection, variable valve timing and dry-sump lubrication supported sustained high-performance operation. Three electric motors supplemented the V6, with a direct-drive motor at the rear and a twin-motor unit driving the front wheels. Type S received revised turbocharger components, higher boost pressure, improved cooling and enhanced battery power delivery.

Best for: Drivers seeking a technically sophisticated mid-engined supercar with immediate electric torque assistance, twin-turbocharged performance and precise all-wheel-drive handling. The standard NC1 suits buyers interested in regular road use, while Type S appeals to those prioritising the final, most extensively developed factory specification.

Body style: Two-door, two-seat, fixed-roof mid-engined coupe built around an aluminium-intensive multi-material spaceframe. The standard Japanese NC1 measured 4,490 mm long, 1,940 mm wide and 1,215 mm high, with a 2,630 mm wheelbase. Type S extended overall length to 4,535 mm through its revised bodywork. There was no Japanese factory convertible, removable-roof Type T or four-seat version. The cabin and luggage accommodation were designed around the requirements of a high-performance two-seat supercar.

Drive: Hybrid Super Handling All-Wheel Drive (SH-AWD), combining a rear-mounted V6 and electric motor with two independent front electric motors. Unlike a conventional mechanical AWD system, the front axle receives driving torque electrically rather than through a propeller shaft from the rear powertrain. The front motors can also provide independently controlled regenerative braking torque, allowing the system to influence cornering behaviour. Honda revised its torque-distribution and stability-control calibrations during production, with further development introduced for Type S.

Transmission: Nine-speed dual-clutch transmission throughout the Japanese NC1 range. The gearbox combines rapid automated shifts with steering-wheel paddle control and works alongside the rear direct-drive electric motor. Honda's Integrated Dynamics System adjusts transmission behaviour according to Quiet, Sport, Sport+ and Track modes. Type S received revised transmission calibration and a paddle-hold downshift function, allowing the driver to request an appropriate lower gear more directly. No conventional manual gearbox, torque-converter automatic or CVT version was offered.

Notable features: The NC1 introduced Honda's three-motor Sport Hybrid SH-AWD system, a longitudinally mounted twin-turbocharged V6, nine-speed DCT and multi-material spaceframe. The 2019 Japanese update improved suspension and electronic control calibration, while the final Type S increased system output to 610 PS. Only 30 Type S vehicles were allocated to Japan, completing the country's second-generation NSX range without a Type R derivative.


Why the NC1's front electric motors changed the meaning of all-wheel drive

The NC1's Sport Hybrid SH-AWD system is fundamentally different from the mechanical all-wheel-drive arrangements found in conventional performance cars.

Honda positioned two independent electric motors at the front axle, each capable of controlling torque at its respective wheel. The twin-turbocharged V6 and third electric motor drive the rear wheels through the nine-speed dual-clutch transmission, but there is no conventional mechanical connection transferring engine torque to the front axle.

This arrangement allows the front motors to perform two different tasks. During acceleration, they contribute driving torque and increase available traction. During cornering, the system can deliver different amounts of positive or negative torque to the left and right front wheels, helping influence the car's yaw response.

The distinction becomes particularly interesting when considering how the NSX enters a bend. Conventional all-wheel-drive systems primarily distribute torque to maintain traction, while the NC1 can actively use its front motors to help the car rotate and follow the intended steering line.

The system also works with Honda's adaptive suspension, electronic steering and Integrated Dynamics System, meaning its behaviour changes according to the selected driving mode.

Type S developed this architecture further through increased available battery output, revised electric-drive control and wider front and rear tracks. The result was not simply stronger acceleration, but a further refinement of how the car responds during corner entry, direction changes and power application.

For buyers comparing the NC1 with an original NA-series NSX, this is the central engineering distinction. The earlier car relies on mechanical balance and driver inputs, while the NC1 actively manages individual wheel forces to influence the vehicle's behaviour.


Japanese Honda NSX NC series grades

The second-generation Japanese NSX had a considerably simpler factory grade structure than its predecessor. Honda launched the NC1 as a single regular-production specification, officially marketed simply as the NSX. Japanese used-car catalogues commonly identify this as the Base grade.

Rather than offering separate luxury and performance grades, Honda provided an extensive custom-order programme. Buyers could select different interior materials, carbon-fibre exterior and interior packages, wheel finishes and braking equipment. 

These combinations could substantially change the original purchase price without altering the underlying engine or hybrid drivetrain.

The only additional confirmed Japanese factory grade was the final NSX Type S, announced in August 2021 and released domestically in July 2022. Unlike the earlier option packages, Type S introduced significant powertrain, chassis and aerodynamic changes. No NC-series Type R was offered in Japan.


Base grade 

The regular Honda NSX NC1 entered Japanese sales in February 2017 as a single factory grade, combining a 507 PS JNC twin-turbocharged V6 with three electric motors for a total system output of 581 PS and 646 Nm. Its nine-speed dual-clutch gearbox, Sport Hybrid SH-AWD drivetrain, adaptive dampers and four-mode Integrated Dynamics System were standard elements of the underlying engineering. Forged 19-inch front and 20-inch rear wheels, Brembo braking equipment and the multi-material spaceframe distinguished it from the original NSX, while the two-seat cabin offered a choice of materials and trim configurations.

The regular NC1 nevertheless developed throughout its production life. The revised model released in Japan in May 2019 introduced stiffer stabilisers, updated suspension bushes, improved tyres and recalibrated electronic control systems, with greater emphasis on steering response and balance. Honda's custom-order programme also allowed buyers to specify carbon-ceramic brakes, carbon-fibre exterior components, upgraded interior materials and other equipment. These factory options did not create additional engine or performance grades. For Japanese import buyers, production period, original option specification, hybrid-system history and maintenance documentation are more informative than the Base grade designation alone.


Type S

The Honda NSX Type S was the final and most extensively developed version of the Japanese NC1, announced in August 2021 and released in July 2022. Limited to 30 cars for Japan from a worldwide allocation of 350, it retained the 3.5-litre twin-turbocharged JNC V6, three-motor Sport Hybrid SH-AWD system and nine-speed dual-clutch transmission. Revised turbochargers, increased boost pressure, improved cooling and enhanced battery performance raised combined output to 610 PS and 667 Nm. Dedicated forged wheels, Pirelli P Zero tyres, wider tracks and revised adaptive suspension and drivetrain control further improved its dynamic capability.

Type S also introduced redesigned front and rear aerodynamic components, distinctive carbon-fibre detailing, black-headlight housings, a red engine cover and individually numbered identification. Honda recalibrated all four driving modes and added a paddle-hold downshift function to the transmission. These changes distinguish it from a standard NC1 equipped with carbon-fibre accessories. For Japanese collectors, the original factory identity, serial-numbered components, documented maintenance and exceptionally small domestic allocation are central to assessing authenticity and value.

Honda NSX FAQ

Can a Japanese NSX with fixed headlights still be an NA1 rather than an NA2?

Yes. The NA1 and NA2 designations identify the original NSX's engine and transmission configuration, not its exterior design. NA1 models use the 2,977 cc C30A VTEC engine, while NA2 identifies the 3,179 cc C32B paired with Honda's six-speed manual gearbox from February 1997.

When Honda introduced fixed headlights in December 2001, the 3.0-litre automatic remained in production. Consequently, a 2003 automatic NSX is still an NA1, despite having the later bodywork. A 1998 six-speed manual, meanwhile, is an NA2 with retractable headlights. Chassis identification is more reliable than appearance when establishing the original specification.

Why did Honda increase the original NSX engine from 3.0 to 3.2 litres without raising its official 280 PS output?

The Japanese automotive industry's voluntary 280 PS power ceiling influenced how Honda developed the original NSX. When the larger C32B VTEC arrived in February 1997, Honda retained the same published 280 PS output but increased maximum torque from approximately 294 Nm to 304 Nm.

The change was accompanied by a new six-speed manual gearbox with closer ratios, improving acceleration and the engine's flexibility across different road speeds. Honda also revised braking and suspension equipment. The larger engine was therefore part of a broader mechanical development programme, rather than an attempt to advertise a higher peak power figure.

What actually separates the 1992 NSX Type R from the 2002 NSX-R?

The original 1992 Type R concentrated on reducing weight and sharpening the NA1 chassis. Honda removed approximately 120 kg through extensive equipment deletion, lightweight Recaro seats, reduced insulation and revised mechanical components. The 3.0-litre C30A retained its 280 PS rating, while shorter gearing and specialised suspension improved its circuit-driving characteristics.

The 2002 NSX-R took a different approach to the same objective. Based on the NA2, it combined the 3.2-litre C32B and six-speed manual with precision-balanced engine components, a vented carbon-fibre bonnet, revised underbody airflow and a carbon-fibre rear wing. Its aerodynamic package generated downforce, making the later car considerably more than a facelifted version of the original Type R.

Was the Japanese NSX Type S Zero simply a Type S with its comfort equipment removed?

No. Although both appeared in February 1997 with the 3.2-litre C32B and six-speed manual gearbox, Honda developed Type S Zero with a more specialised chassis specification. The regular Type S combined reduced weight, forged BBS wheels, Recaro seats and dedicated suspension tuning while retaining equipment suitable for regular road use.

Type S Zero removed additional weight through the deletion of air conditioning, audio equipment and sound insulation. Honda also fitted suspension settings intended specifically for more demanding sports driving. Compared with the same power-steering-equipped NSX coupe, Honda quoted weight reductions of approximately 45 kg for Type S and 96 kg for Type S Zero. The difference reflected more than the removal of comfort equipment, with Type S Zero receiving a separate, firmer suspension specification intended for circuit use. Removing equipment from an ordinary Type S does not recreate the complete factory Type S Zero specification.

Did the NSX Type T sacrifice structural rigidity to accommodate its removable roof?

The Type T required a different structural approach because removing the fixed roof changed the loads carried through the original aluminium body. Honda introduced additional reinforcement to maintain the necessary body stiffness, which contributed to the Type T's greater weight compared with an equivalent fixed-roof coupe.

Introduced in March 1995, Type T was intended to provide open-air driving without abandoning the NSX's fundamental handling characteristics. Its removable roof panel, seals, mounting points and storage arrangements deserve particular attention when inspecting an older Japanese example. Evidence of water ingress, damaged seals or previous structural repairs can be especially relevant, even when the exterior panels appear undamaged.

What was the purpose of the extremely rare 2005 Honda NSX-R GT, and was its roof scoop functional?

The NSX-R GT was a homologation special developed to support Honda's participation in Japan's GT500 racing category. Only five road cars were built, each based on the NA2 NSX-R. Its dramatically revised bodywork featured larger air openings, carbon-fibre aerodynamic components and a prominent roof-mounted scoop.

Contrary to what its appearance suggests, the road-going R GT's roof scoop was not a functional engine air intake. Its purpose was connected to homologating the bodywork for competition. Mechanically, the road car retained the underlying NSX-R drivetrain rather than introducing a new high-output engine. This distinction is important because an ordinary NSX-R fitted with similar bodywork is not an authentic factory NSX-R GT.

How can a Japanese buyer distinguish an original NSX Type R from a standard NSX fitted with Type R components?

Exterior appearance is not enough. Championship White paint, red Honda badges, Recaro seats, lightweight wheels and Type R-style body panels can be fitted to ordinary NA1 and NA2 cars. Even a visually convincing replica may retain the standard engine, gearbox, suspension and original factory identity.

A genuine Type R should be verified through its chassis identification, original Japanese factory records and documentation appropriate to its production period. The 1992 and 2002 versions also have different mechanical equipment, making it necessary to identify which version is being assessed. Originality matters considerably at current collector prices, particularly where an advertised car has undergone restoration, repainting or extensive modification.

What does Honda's NSX Refresh Plan mean, and can Japanese owners still use it?

Honda introduced its NSX Refresh Plan in 1993 to help restore ageing first-generation cars towards their intended mechanical condition. The programme could involve detailed work on suspension, engine-related components, body fittings and other systems affected by age. For a Japanese NSX with documented factory restoration work, this history may provide valuable evidence of previous expenditure and specialist attention.

Honda stopped accepting applications for the original NSX Refresh Plan at the end of August 2025. Its successor, Honda Heritage Works, launched in April 2026, introducing reproduction parts and a new restoration service in Japan. The restoration programme initially covered the NA1-100 chassis series, so buyers should not assume that every NA1 or NA2 qualifies for the same factory restoration services. Buyers should request invoices and an exact breakdown of completed work, since participation in a restoration programme does not establish that every component has been replaced or that the car requires no further inspection.

How does the NC1 NSX drive its front wheels without a conventional mechanical all-wheel-drive connection?

The NC1's Sport Hybrid SH-AWD uses two independent electric motors mounted within the front subframe. Unlike conventional all-wheel-drive systems, the front axle does not receive engine torque through a propeller shaft from the rear-mounted V6. Each front motor drives its corresponding wheel through a reduction mechanism.

The arrangement allows the system to apply positive driving torque or regenerative braking torque independently at either front wheel. This produces a controlled yaw effect that can help the car turn into, maintain or exit a corner. At very high speeds, the front motor system can disconnect its motors from the wheels to protect them from excessive rotational speed. The drivetrain therefore operates differently from a conventional permanent mechanical AWD system.

Why is the 2019 Japanese NC1 revision significant when its hybrid-system output remained at 581 PS?

Honda's revised NC1, announced in October 2018 for Japanese delivery from May 2019, concentrated on handling rather than increasing power. The front stabiliser stiffness increased by 26%, the rear by 19%, while revised suspension bushes and rear hub components improved the rigidity of the chassis assemblies.

Honda also introduced newly developed tyres and recalibrated electronic control systems, including the Sport Hybrid SH-AWD, steering assistance and adaptive suspension. The objective was greater driver confidence, more precise steering response and improved control near the vehicle's handling limits. An early NC1 and a 2019-updated example therefore share the same published system output but do not have identical chassis or control-system specifications.

Do the NC1's carbon-fibre packages and carbon-ceramic brakes create different Japanese factory grades?

No. The regular Japanese NC1 was marketed as a single factory grade with an extensive custom-order programme. Buyers could select carbon-fibre exterior components, interior trim packages, different upholstery materials and optional carbon-ceramic braking equipment without changing the fundamental twin-turbocharged V6, three-motor hybrid system or nine-speed dual-clutch transmission.

These options can nevertheless influence the desirability and maintenance costs of an individual NSX. Carbon-ceramic brakes, in particular, should be assessed for condition and replacement expense, while original carbon-fibre equipment should be checked for damage and correct factory fitment. A heavily optioned regular NC1 remains a standard-grade NSX, not an additional factory performance edition.

Was there ever a Japanese NC1 Type R, and what made the final Type S different?

Honda never introduced a factory NC1 Type R. The final Japanese performance edition was the Type S, announced in August 2021 and released domestically in July 2022. Honda allocated just 30 cars to Japan from a worldwide production run of 350 vehicles, making it considerably rarer than the regular NC1.

Type S was more than an appearance package. Revised turbochargers and increased boost pressure raised combined output to 610 PS and 667 Nm, while Honda improved battery power delivery, revised the front electric-motor gearing and recalibrated the hybrid drivetrain. Wider tracks, dedicated tyres, revised aerodynamics and updated suspension control further distinguished it. The Type S is therefore the final developed form of the NC1, rather than an NSX-R carrying a different badge.

Before you import 


Before importing a Honda NSX from Japan, confirm its generation, chassis code, engine, transmission and original factory grade. For rare Type R, Type S Zero and Type S editions, verifying authenticity is particularly important.

NA-series cars require careful inspection of their aluminium structure, timing-belt history, gearbox and cooling system. NC1 models introduce additional considerations, including hybrid battery health, electric motors and dual-clutch transmission servicing.

Review Japanese service records, accident history and available inspection reports before committing to a purchase. Finally, assess the complete landed cost, including shipping, customs charges, VAT, Irish VRT and any anticipated maintenance.


Find your Honda NSX in Japan


Looking for an original NA1 manual, a later 3.2-litre NA2 or a hybrid NC1? Tell us which NSX you have in mind, your preferred factory grade, budget and buying timeframe. We can help you understand what's available in Japan and what it could realistically cost to import into Ireland.

Explore Japanese NSX availability, from original VTEC models to the final hybrid Type S. 


Explore Other Popular Imports


Toyota Chaser JZX100

Mitsubishi Lancer Evolution


Newest JDM Import Guides

Be the first to read what's new!


Japanese auction sheet damage codes are shorthand used by auction inspectors to record visible defects and previous work across a vehicle. Depending on the auction house, markings such as A can indicate scratches, U dents, W signs of paintwork or repair, S rust, C corrosion, while X and XX can identify panels requiring replacement or already...

Choosing the right car isn't just about finding the right make, model or budget. When importing from Japan, the exact specification can dramatically influence what you'll pay by the time the vehicle reaches Ireland. Two cars that appear almost identical may have completely different VRT calculations, running costs and long-term value, because of...

Choosing the best Japanese wheelchair accessible vehicle isn't about buying the most expensive model or the one with the biggest badge. It's about finding the WAV that best suits your mobility requirements, family, passengers and everyday lifestyle. For some buyers, that may be a compact family WAV such as the Toyota Sienta, Honda Freed, Toyota...

The Toyota Chaser JZX100 has quietly become one of Japan's most sought-after performance saloons. Once considered an affordable alternative to the Nissan Skyline, today's best examples are increasingly difficult to find, with clean, original cars attracting strong demand from enthusiasts across Europe, Australia and the United States. As...