Japanese auction sheet damage codes are shorthand used by auction inspectors to record visible defects and previous work across a vehicle. Depending on the auction house, markings such as A can indicate scratches, U dents, W signs of paintwork or repair, S rust, C corrosion, while X and XX can identify panels requiring replacement or already...
Toyota C-HR Import Ireland: Buyer's Guide
Japanese hybrid and turbo models, GR Sport chassis upgrades and special editions explained
Compare Japanese ZYX10, ZYX11, NGX10 and NGX50 models, including hybrid G, turbocharged G-T, GR Sport and Mode Nero editions, with guidance on factory equipment, condition and Irish import costs.
Toyota introduced the C-HR in Japan in December 2016 with two engine options. The S and G grades used a 1.8-litre petrol-hybrid system with front-wheel drive, while S-T and G-T models came with a 1.2-litre turbocharged petrol engine and electronically controlled four-wheel drive. All four versions used Toyota's TNGA platform, with MacPherson strut front suspension and independent double-wishbone rear suspension. The higher-specification G and G-T grades included 18-inch alloy wheels, upgraded upholstery and additional convenience equipment. For Irish buyers considering a Toyota C-HR import from Japan, identifying the original engine, drivetrain and factory grade is important because these specifications changed during production.


Toyota continued developing the Japanese C-HR rather than leaving the original four-grade range unchanged. Front-wheel-drive turbo models arrived in 2018, followed by a significant update in October 2019 that introduced a six-speed intelligent manual transmission and the S GR Sport and S-T GR Sport. These brought dedicated suspension tuning, additional chassis reinforcement and distinctive GR equipment. Toyota also expanded the range with LED Edition, Mode Bruno and Mode Nero specifications, followed by several Mode Nero Safety Plus versions with increasingly comprehensive safety and convenience equipment. As a result, an early ZYX10 hybrid G, an NGX10 S-T GR Sport manual and a later ZYX11 G Mode Nero Safety Plus III offer quite different combinations of equipment and drivetrain technology.
This guide focuses specifically on the Toyota C-HR models sold in Japan, covering their engines, chassis codes, factory grades, special editions, mechanical differences and the practical costs of importing one into Ireland.
The evolution of the Toyota C-HR
Japanese launch, 2019 facelift, GR Sport and special editions
Toyota first revealed the C-HR concept at the Paris Motor Show in October 2014. At the time, compact SUVs were becoming increasingly popular, but Toyota wanted something different from the practical, upright shape of the RAV4. The C-HR was developed for customers who placed greater importance on styling and driving enjoyment, even if that meant accepting compromises in rear visibility and passenger space. Its name stood for Coupé High-Rider, reflecting the unusual combination of a raised driving position and a low, coupe-like roofline.
A revised five-door concept appeared at Frankfurt in September 2015, followed by the production model in March 2016. The production model retained the concept's pronounced wheel arches, concealed rear door handles and narrow rear windows. The pronounced wheel arches, sharply sculpted doors, concealed rear handles and narrow rear windows all made it into production. Chief engineer Hiroyuki Koba also wanted the C-HR to feel more responsive than a conventional crossover. Toyota used the TNGA platform, already introduced with the fourth-generation Prius, but developed the suspension and steering around the C-HR's own requirements. The car received independent double-wishbone rear suspension, a relatively low centre of gravity and extensive chassis tuning on European roads.
Toyota even entered a specially prepared C-HR in the 2016 Nürburgring 24 Hours before the production car went on sale. It completed the race, giving Toyota an opportunity to test the platform under considerably more demanding conditions than ordinary road use.
The Japanese C-HR officially launched on 14 December 2016. Customers initially chose between the 1.8-litre hybrid, using the 2ZR-FXE engine, and the 1.2-litre turbocharged 8NR-FTS. The hybrid was front-wheel drive, while the original turbocharged models came with four-wheel drive. G and G-T offered more equipment than S and S-T, although all four shared the same distinctive body.
Toyota recorded 117,299 C-HR sales in Japan during 2017. Toyota sold 117,299 C-HRs in Japan during 2017, making it the country's best-selling new SUV that year.
Development continued in May 2018 when Toyota added front-wheel-drive turbo models, giving Japanese customers another option beyond the original 4WD specification. The more substantial changes arrived in October 2019. Revised bumpers, lighting and interior equipment accompanied the introduction of S GR Sport and S-T GR Sport. The GR Sport specifications included mechanical changes beyond their exterior styling. Toyota added underbody reinforcement, revised the suspension springs, dampers and stabilisers, altered the steering calibration and fitted dedicated 19-inch wheels. A six-speed intelligent manual gearbox also became available on front-wheel-drive 1.2-litre turbo models.
The later years brought improvements to Toyota Safety Sense, including additional collision-detection functions and emergency steering assistance. Special editions became increasingly prominent, particularly Mode Nero and its successive Safety Plus versions. By 2022, the Safety Plus III models offered equipment such as panoramic parking cameras, additional parking assistance and distinctive factory finishes.
Toyota announced that Japanese C-HR production would end in late July 2023, although the final Japanese catalogue period extends into August. There was no second generation for the Japanese domestic market. Toyota did develop a completely new C-HR for Europe, with production beginning in Turkey in November 2023, but that model was not introduced into the Japanese range.
Consequently, every officially sold Japanese C-HR belongs to the original 10/50 Series family. For someone considering importing one into Ireland, the differences are found in the engine, drivetrain, production revision and factory equipment rather than separate generations. An early hybrid G and a late GR Sport may share the same basic platform, but their specifications offer quite different reasons to choose one over the other.
Toyota C-HR
Toyota C-HR 10/50 Series (December 2016 – August 2023)
The C-HR's unusual styling attracted plenty of attention when it arrived in Japan, but the choice of engine makes a considerable difference to how the car drives. Toyota offered two distinct mechanical configurations from the beginning. The ZYX10 hybrid combined a 1.8-litre petrol engine with an electric motor and front-wheel drive, while the NGX50 used a 1.2-litre turbocharged engine with four-wheel drive. Both shared the TNGA platform, MacPherson strut front suspension and independent double-wishbone rear suspension, although their weight, transmission behaviour and power delivery were different.
The original hybrid was particularly well suited to slower urban driving. Its electric motor could move the car at low speeds without requiring the petrol engine to run continuously, while Toyota's electronically controlled transmission made progress smooth and predictable. The turbocharged C-HR had a more conventional driving character, using its 185 Nm of torque and continuously variable transmission to provide steady acceleration. Its electronically controlled four-wheel-drive system also gave it additional traction when road conditions demanded it.
Toyota broadened the choice in May 2018 by introducing front-wheel-drive turbo models. The October 2019 facelift then brought another significant change, including the option of a six-speed intelligent manual gearbox on selected front-wheel-drive turbo grades.
The hybrid retained its original powertrain layout, while the updated ZYX11 chassis designation replaced ZYX10 in the Japanese catalogue.
GR Sport also joined the range in October 2019. The hybrid S GR Sport received dedicated steering, suspension and chassis tuning, while S-T GR Sport combined similar improvements with the 1.2-litre turbo engine. Initially available with a six-speed manual and front-wheel drive, the turbo GR Sport gained CVT and four-wheel-drive alternatives in August 2020.
Toyota also introduced several Japanese-market special editions with different lighting, upholstery and parking equipment. Early LED models introduced more sophisticated lighting, while Mode Bruno offered distinctive brown interior finishes. Mode Nero took a darker approach, eventually developing into the Safety Plus series with more comprehensive parking assistance and driver-support equipment.
A 2017 G hybrid, a 2019 G-T turbo and a 2022 Mode Nero Safety Plus III may look closely related, but their equipment and driving characteristics are not identical. With Japanese production ending in 2023, the later cars are particularly interesting for the additional safety technology Toyota introduced during the final years.
Current Japanese Retail Price: Around ¥1 million–¥3.9 million+ (approximately €5,700–€22,300+ / $6,300–$24,500+). Japanese C-HR retail prices remain spread across a substantial number of used examples, including early high-mileage hybrids, relatively inexpensive 1.2-litre turbo models and considerably newer special editions. Current CarSensor listings show advertised stock from approximately ¥998,000 to ¥3.88 million, with an average asking price of around ¥1.86 million. Ordinary 2017–2018 S and S-T models tend to occupy the more affordable part of the market, while later G hybrids, well-equipped Mode Nero editions and low-mileage GR Sport cars command higher prices. The original specification, repair history, mileage, colour, hybrid battery condition and factory equipment all influence value. These are Japanese retail asking prices, not auction prices or Irish landed costs.
Import cost considerations: Hybrid and turbocharged versions also have different CO₂ and NOx characteristics, making the exact engine, year and emissions documentation relevant to the final registration cost. Japanese retail prices exclude export handling, inland transport, shipping, marine insurance, customs duty, Irish VAT, VRT and registration expenses. A hybrid G with a modest Japanese asking price may have a different landed-cost profile from a similarly priced G-T 4WD. The individual car's emissions evidence should be established before making a final comparison.
Engine output:
2ZR-FXE 1.8-litre Atkinson-cycle petrol engine: 98 PS at 5,200 rpm / 142 Nm at 3,600 rpm
Hybrid electric traction motor: 72 PS / 163 Nm
Combined 1.8-litre hybrid system output: 122 PS
8NR-FTS 1.2-litre turbocharged petrol engine: 116 PS at 5,200–5,600 rpm / 185 Nm at 1,500–4,000 rpm
Note. The hybrid's petrol engine and electric motor outputs are not added together to calculate system power. Toyota quotes 122 PS for the complete hybrid system.
Engine: Japanese C-HR hybrids use the 1,797 cc 2ZR-FXE four-cylinder petrol engine operating on the Atkinson cycle, combined with an electric traction motor, power-control electronics and a nickel-metal hydride hybrid battery. The system is closely related to Toyota's fourth-generation Prius technology. The petrol-only alternative uses the 1,196 cc 8NR-FTS DOHC four-cylinder with direct fuel injection, a turbocharger and intercooler. Toyota developed it to deliver useful torque from relatively low engine speeds rather than relying on high-revving performance. Japanese ZYX10 and ZYX11 models retained the 1.8-litre hybrid system, so buyers should concentrate on the production date, battery condition, service history and factory equipment rather than expecting a larger-engine hybrid option.
Best for: Drivers who like the C-HR's compact dimensions and distinctive styling but want more choice than the usual hybrid crossover offers. The 1.8-litre hybrid suits regular commuting and urban driving, while the 1.2-litre turbo provides a conventional petrol alternative. GR Sport appeals to those interested in the sharper chassis setup, and the later Mode Nero editions suit buyers who value factory equipment and parking assistance.
Body style: Five-door, five-seat compact crossover with a coupe-like roofline, raised driving position and concealed rear door handles. Early Japanese models measure approximately 4,360 mm long, 1,795 mm wide and 1,550 mm high, with a 2,640 mm wheelbase. Later facelift and GR Sport specifications have slightly different overall lengths, reaching approximately 4,390 mm for GR Sport. The cabin has conventional front seats and a three-person rear bench, although the small rear side windows and sloping roof make the rear compartment feel more enclosed than in a RAV4. The boot is accessed through a large upward-opening tailgate.
Drive: Front-wheel drive on all Japanese hybrid models, including G, S and S GR Sport. The original 1.2-litre turbo C-HR was offered with electronically controlled four-wheel drive, while front-wheel-drive versions followed in May 2018. The NGX50 system automatically varies drive to the rear axle according to traction and driving conditions. It is not a conventional off-road 4WD system with a low-range transfer case. Toyota used MacPherson strut front suspension and double-wishbone rear suspension throughout the range. GR Sport versions received additional body reinforcement and dedicated suspension and steering tuning.
Transmission: Japanese hybrid models use Toyota's electronically controlled power-split e-CVT, which is mechanically different from the belt-driven CVT fitted to the petrol turbo versions. The 1.2-litre turbo originally used Super CVT-i with seven simulated gear ratios available through sequential shifting. Toyota introduced a six-speed intelligent manual transmission, known as iMT, on selected front-wheel-drive turbo models in October 2019. This included the original S-T GR Sport. From August 2020, S-T GR Sport also became available with CVT, including four-wheel drive. No Japanese C-HR hybrid was offered with a manual gearbox.
Notable features: TNGA platform, independent rear suspension, 122 PS petrol-hybrid system, 116 PS turbocharged petrol engine and electronically controlled 4WD on selected NGX50 models. Significant Japanese developments included the 2018 introduction of front-wheel-drive turbo versions, the October 2019 facelift, six-speed iMT, GR Sport's revised chassis and 19-inch wheels, expanded Toyota Safety Sense equipment from August 2020 and the later Mode Nero Safety Plus editions with panoramic cameras and parking-support braking.
What the Japanese chassis codes tell you about a C-HR
Four chassis designations appear across the Japanese C-HR range, and they provide a useful way of separating the different powertrains. The original hybrid used ZYX10. It combined the 1.8-litre 2ZR-FXE hybrid system with front-wheel drive and Toyota's electronic power-split transmission.
Following the October 2019 facelift, the hybrid appeared under the ZYX11 designation. The underlying powertrain remained closely related to the earlier car, but the revised model introduced updated exterior details, changes to equipment and the later GR Sport specification.
The petrol turbo models followed a different pattern. NGX50 identifies the four-wheel-drive version of the 1.2-litre turbo C-HR. It was available from the original December 2016 launch and remained part of the Japanese range until production ended.
NGX10 arrived when Toyota introduced front-wheel-drive turbo models in May 2018. It initially used the CVT, but the 2019 update added a six-speed manual option. That means an NGX10 G-T or S-T can have either transmission depending on its production period and specification.
These codes are particularly useful when searching Japanese auction and retail databases. A listing described only as a 2019 C-HR G-T does not immediately establish whether it has front-wheel drive or four-wheel drive, and a later S-T GR Sport could be a manual or CVT.
The original model code, production month and transmission should be checked together. Those details establish the underlying car before the colour, wheels or special-edition name enter the discussion.
Japanese Toyota C-HR 10/50 series grades
The Japanese C-HR range was built around four grades: S and G with the 1.8-litre hybrid system, and S-T and G-T with the 1.2-litre turbocharged petrol engine. The G versions offered more equipment, while the S models provided the same basic mechanical package with simpler interiors and smaller wheels. The turbocharged range also gave Japanese buyers a choice of front-wheel drive, four-wheel drive and, from 2019, a six-speed manual transmission.
Toyota expanded the original line-up with several special editions. LED Edition and LED Package brought improved lighting to earlier cars, while Mode Bruno and Mode Nero introduced distinctive interior colours and exterior details.
The later Mode Nero Safety Plus models concentrated on parking assistance and additional equipment. GR Sport took a different approach, with dedicated suspension, steering and chassis improvements rather than a new engine.
The differences are worth understanding because two Japanese C-HRs with similar mileage and asking prices may have very different factory specifications. Some editions offer little beyond their appearance, while others provide equipment that is genuinely useful in everyday driving.

G
G was the higher-specification hybrid C-HR when Toyota launched the model in December 2016. It used the 1.8-litre 2ZR-FXE petrol engine combined with an electric motor, producing 122 PS as a complete hybrid system. Front-wheel drive and Toyota's electronic power-split transmission were standard. Compared with S, the G received 18-inch alloy wheels, leather-and-fabric upholstery, heated front seats, blind-spot monitoring and additional parking sensors.
The G is particularly appealing because Toyota equipped it well from the beginning, although the specification continued to improve during production. The 2019 facelift introduced revised lighting and interior technology, while the August 2020 update brought more advanced Toyota Safety Sense functions. An early ZYX10 G and a later ZYX11 G share the same basic hybrid system, but their safety and convenience equipment can differ considerably. For everyday driving in Ireland, heated seats, parking assistance and the original infotainment equipment are worth checking alongside mileage and service history.

G Mode Nero
The original G Mode Nero arrived in December 2018, giving the hybrid C-HR a darker factory appearance. Toyota fitted black-painted 18-inch alloy wheels with matching black wheel nuts, while the interior combined black dashboard and console surfaces with Cool Grey leather accents on the seats. It retained the same 122 PS hybrid system, front-wheel drive and electronic transmission as the regular G.
Mode Nero was not a performance upgrade. Its attraction was the combination of black wheels, distinctive upholstery and carefully selected exterior colours, including Blackish Ageha Glass Flake. These details distinguish it from an ordinary G fitted with aftermarket black alloys. This is also the original pre-facelift Mode Nero, produced before Toyota introduced the more extensively equipped Safety Plus versions. When comparing Japanese listings, the production date is an easy way to distinguish the original edition from its later successors.

G Mode Nero Safety Plus
August 2020 brought a more substantial version of the black-themed C-HR. The G Mode Nero Safety Plus retained the 1.8-litre hybrid system but added black exterior details, dark alloy wheels and a predominantly black interior. Unlike the original Mode Nero, this edition also received an expanded parking-assistance package.
The equipment included a Panoramic View Monitor, Intelligent Clearance Sonar with parking-support braking for stationary objects, and Rear Cross Traffic Auto Brake. These additions are particularly useful on the C-HR because its high rear window line and thick rear pillars restrict visibility when reversing. Toyota also updated the wider C-HR range's Safety Sense system in August 2020, introducing additional pedestrian and cyclist detection capabilities. The Safety Plus is therefore more than another black appearance package, particularly for someone who regularly parks in tight spaces.

G Mode Nero Safety Plus II
Toyota introduced the second Mode Nero Safety Plus edition in June 2021. The hybrid drivetrain remained unchanged, but the exterior received matte-black 18-inch alloy wheels with dark-smoke chrome wheel nuts. Black-accented Bi-Beam LED headlights gave the front a distinctive appearance, while Sparkling Black Pearl Crystal Shine joined the available factory colours.
The interior also changed. Toyota used dedicated black seat upholstery and decorative trim that could appear blue or purple depending on the light. The panoramic camera, clearance sonar and rear cross-traffic braking equipment carried over from the first Safety Plus. Consequently, the second edition is most easily recognised by its wheels, headlights and interior finishes rather than any mechanical development. The original black-accented headlamp units are worth examining closely because replacing damaged LED assemblies can be expensive.

G Mode Nero Safety Plus III
Toyota introduced the G Mode Nero Safety Plus III in Japan on 29 August 2022. It was among the final special editions offered before Japanese C-HR production ended in 2023. Toyota introduced Inazuma Sparkling Black Glass Flake as a special exterior colour, together with matte-black 18-inch wheels, dark-smoke chrome wheel nuts and black-accented Bi-Beam LED headlights. The cabin moved away from the almost entirely black appearance of Safety Plus II, adding brown leather accents and beige stitching to the seats.
Parking equipment remained a significant part of the specification, including the Panoramic View Monitor and parking-support braking for stationary objects and approaching traffic. The hybrid system continued to produce 122 PS, with front-wheel drive. This is one of the final Japanese C-HR special editions, making it especially interesting to buyers looking for a late-production car with a comprehensive original equipment package. The distinctive brown upholstery and special paint colour help separate it from the earlier versions.

G Mode Bruno
Mode Bruno appeared alongside the original Mode Nero in December 2018, but Toyota chose a completely different interior treatment. Rather than black and grey, the G Mode Bruno featured Dark Saddle Tan upholstery and matching brown finishes across the upper dashboard and centre console. Chrome-finished exterior door handles and selected two-tone body colours completed the appearance.
The mechanical specification remained that of the regular hybrid G, with 122 PS, front-wheel drive and an electronic hybrid transmission. Mode Bruno was intended to offer a more distinctive and comfortable-looking cabin rather than a sportier drive. The brown interior is particularly noticeable because the C-HR's dashboard extends into the door trim, giving the colour a strong presence throughout the front compartment. These factory materials are the main attraction, so their condition deserves attention, especially around the seat bolsters and frequently touched interior surfaces.

G LED Edition
The G LED Edition was introduced in November 2017, before the C-HR's first significant equipment revision. Toyota made its advanced lighting package standard, including Bi-Beam LED headlights with automatic levelling, LED daytime running lights, sequential front indicators and LED rear combination lamps. Chrome-finished exterior door handles provided another visual distinction from the original G.
The edition retained the same 122 PS hybrid system, 18-inch wheels and higher-grade interior equipment as the regular G. At the time, the LED lighting package was an optional extra on standard G models, so the edition brought together equipment that buyers might otherwise have needed to specify separately. These cars retain the original pre-facelift body design. A G LED Edition can therefore offer an appealing combination of early styling and better lighting, although the condition and originality of the LED assemblies should be established before purchasing.

G-T
G-T was the better-equipped turbocharged C-HR, originally offered with the 1.2-litre 8NR-FTS producing 116 PS and 185 Nm. Japanese launch models used electronically controlled four-wheel drive and Super CVT-i. The G-T received 18-inch alloy wheels, upgraded upholstery, heated seats and additional driver-assistance equipment compared with the basic S-T.
Its mechanical specification changed during production. Toyota added front-wheel-drive versions in May 2018, followed by a six-speed intelligent manual gearbox for selected front-wheel-drive models in October 2019. This gave Japanese buyers three different G-T configurations: front-wheel-drive manual, front-wheel-drive CVT and four-wheel-drive CVT. The manual is particularly interesting because it provides a driving experience quite unlike the hybrid C-HR. A Japanese advertisement mentioning G-T alone does not establish which drivetrain it has, so the NGX10 or NGX50 chassis code and transmission details should be checked.

G-T Mode Nero
The G-T Mode Nero was introduced in December 2018 as the turbocharged equivalent of the hybrid G Mode Nero. Black-painted 18-inch alloy wheels, black wheel nuts and a darker interior were the main features. Cool Grey leather accents appeared on the seats, while black dashboard and console surfaces replaced the more conventional finishes of the standard G-T.
Toyota offered the edition with the 116 PS turbocharged engine, Super CVT-i and either front-wheel drive or four-wheel drive. Its performance was unchanged from the regular G-T. The distinction is therefore in its original equipment and appearance, particularly the black wheels and interior materials. This edition predates the 2019 facelift and later manual gearbox introduction. An original G-T Mode Nero should consequently be identified as a CVT model, regardless of whether it has front-wheel drive or 4WD.

G-T Mode Nero Safety Plus
The G-T Mode Nero Safety Plus arrived in August 2020, combining the 1.2-litre turbocharged engine with the equipment improvements introduced on the hybrid edition. Black exterior detailing, dark alloy wheels and dedicated black interior finishes gave the car its appearance, while Super CVT-i remained standard. Buyers could choose front-wheel drive or electronically controlled four-wheel drive.
Toyota also included the Panoramic View Monitor, parking-support braking for stationary objects and Rear Cross Traffic Auto Brake. This is useful equipment on a car whose styling makes rear visibility less straightforward than in a conventional SUV. The 2020 Safety Sense revision also introduced more advanced collision-detection functions across the wider C-HR range. For someone specifically looking for a turbocharged Japanese C-HR with 4WD, the G-T Mode Nero Safety Plus combines the original drivetrain with equipment unavailable on many earlier examples.

G-T Mode Nero Safety Plus II
June 2021 brought the G-T Mode Nero Safety Plus II, with the same changes to factory appearance seen on the hybrid edition. Matte-black 18-inch alloy wheels replaced the previous wheel finish, accompanied by dark-smoke chrome nuts and black-accented Bi-Beam LED headlights. Sparkling Black Pearl Crystal Shine was among the special exterior colours, while the cabin received dedicated black upholstery and blue-to-purple decorative trim.
The 116 PS turbocharged engine, CVT and choice of front-wheel drive or 4WD continued unchanged. Toyota also retained the panoramic camera, clearance sonar and rear cross-traffic braking functions. Safety Plus II therefore offers the later appearance and parking equipment without introducing the GR Sport suspension setup or the six-speed manual. The original headlamps, wheels and interior trim are the features most likely to distinguish a genuine example from an ordinary G-T fitted with dark aftermarket accessories.

G-T Mode Nero Safety Plus III
The final turbocharged Mode Nero arrived in August 2022. Toyota retained the G-T's 1.2-litre 8NR-FTS engine, Super CVT-i and choice of front-wheel drive or four-wheel drive, but revised the appearance with Inazuma Sparkling Black Glass Flake paint, matte-black wheels and black-accented LED headlights. Brown leather seat accents and beige stitching introduced a warmer contrast to the otherwise dark cabin.
The Safety Plus III equipment included panoramic cameras and parking-support braking for both stationary objects and approaching traffic. It was one of the last special editions offered before Japanese C-HR production ended in 2023. Unlike S-T GR Sport, it did not receive a separate suspension or steering calibration. Its appeal is the combination of late-production safety equipment, distinctive upholstery and the 1.2-litre turbo drivetrain, particularly where a buyer prefers conventional petrol power over the hybrid.

G-T Mode Bruno
Toyota introduced the G-T Mode Bruno in December 2018, bringing the brown-themed interior to the turbocharged C-HR. The seats, upper dashboard and centre console featured Dark Saddle Tan finishes, while chrome-finished front door handles and selected special paint combinations distinguished the exterior. The underlying engine remained the 116 PS 8NR-FTS.
Both front-wheel-drive and four-wheel-drive versions were available, using Super CVT-i. The Mode Bruno specification did not introduce additional power, a different turbocharger or a dedicated suspension package. Instead, it gave the conventional petrol C-HR an interior substantially different from the usual black finishes. For someone considering this edition, the condition and completeness of the original upholstery and brown dashboard trim are particularly relevant. Its distinctive factory colour combination is more meaningful than the presence of ordinary G-T mechanical components.

G-T LED Edition
The G-T LED Edition joined the Japanese range in November 2017, when the turbocharged C-HR was still exclusively four-wheel drive. It retained the 116 PS 8NR-FTS engine and Super CVT-i transmission while receiving Bi-Beam LED headlights, automatic headlamp levelling, sequential front indicators, LED daytime running lights and LED rear combination lamps. Chrome-finished exterior door handles were also included.
The G-T already offered a relatively comprehensive equipment package, so this edition was primarily about making the more sophisticated lighting standard. The sequential indicators were a particularly noticeable feature of the original C-HR design. Because the G-T LED Edition belongs to the pre-May 2018 period, it should have the NGX50 4WD configuration. Toyota had not yet introduced the front-wheel-drive turbo or manual transmission variants. This makes the edition straightforward to identify mechanically, although previous lighting or body repairs still deserve attention.

S
S was the simpler of the two original Japanese hybrid grades. Introduced in December 2016, it used exactly the same 1.8-litre petrol-hybrid system as G, producing a combined 122 PS and driving the front wheels through Toyota's electronic power-split transmission. The main differences were equipment-related. S used 17-inch alloy wheels, fabric upholstery and a less elaborate interior finish, although Toyota Safety Sense P was standard from launch.
The smaller 17-inch wheels are worth considering because they use a taller tyre sidewall than the G's 18-inch specification. This can be appealing on everyday roads, particularly where ride comfort and replacement tyre costs are priorities. Later S models received the broader C-HR improvements introduced during 2019 and 2020, including revised lighting and safety equipment. An S should not be dismissed simply because it sits below G, as the hybrid engine and transmission are fundamentally the same.

S GR Sport
Toyota introduced S GR Sport in October 2019 as part of the major Japanese C-HR facelift. It retained the 122 PS hybrid system and front-wheel drive but received a chassis package developed by Toyota Gazoo Racing. The changes included a dedicated floor centre brace, revised springs, dampers and stabilisers, altered electric power steering calibration and 19-inch alloy wheels with 225/45R19 tyres. A GR-specific front bumper, larger grille, sports seats and smaller steering wheel completed the specification.
The S GR Sport is not simply a standard S with different bumpers. Toyota made genuine changes to suspension and steering response, giving the hybrid C-HR a more focused road character. The powertrain itself remained unchanged, so acceleration and fuel economy were still determined largely by the regular 1.8-litre hybrid system. The 19-inch wheels and lower-profile tyres are an important consideration for Irish roads, where ride comfort and tyre condition can influence the ownership experience. Its original GR suspension components also distinguish it from a cosmetically modified S.

S LED Edition
The S LED Edition arrived in November 2017, giving the entry-level hybrid C-HR lighting equipment previously associated with the higher grades. Toyota fitted Bi-Beam LED headlights with automatic levelling, sequential front indicators, LED daytime running lights and LED rear combination lamps. Chrome-finished door handles and selected two-tone colours completed the special edition.
Mechanically, it remained a front-wheel-drive 122 PS hybrid with the same basic wheels and interior specification as S. This made it an appealing choice for Japanese customers who preferred the simpler grade but wanted the distinctive LED lighting. It is also one of the earlier C-HR special editions, produced before Toyota's May 2018 equipment update. The factory lighting package is the main reason to choose it over an ordinary 2017 S, so original headlamp condition and evidence of previous front-end repairs deserve attention.

S LED Package
May 2018 brought the S LED Package, following Toyota's decision to make the full LED headlamp arrangement standard on higher grades. The S remained available with its simpler lighting specification, while the LED Package provided the more elaborate Bi-Beam headlights, sequential indicators and LED daytime running lights. The 122 PS hybrid drivetrain, front-wheel drive and electronic transmission remained unchanged.
The LED Package was not a performance model or an upgrade to G equipment. It provided the lighting associated with more expensive C-HRs while retaining the S interior and 17-inch wheels. Toyota also expanded the available exterior colours during the May 2018 update, including Nebula Blue Metallic. For someone searching Japanese retail stock, this grade can be an interesting alternative to a G when the preferred colour and lighting are available without the additional higher-grade equipment.

S-T
S-T was Toyota's entry-level 1.2-litre turbo C-HR, introduced in December 2016 with 116 PS and 185 Nm. The original Japanese specification combined the engine with Super CVT-i and electronically controlled four-wheel drive. It used 17-inch wheels and simpler interior materials than G-T, although the basic TNGA chassis, independent rear suspension and Toyota Safety Sense equipment were shared with the wider range.
The S-T became much more varied after May 2018, when Toyota introduced front-wheel drive. October 2019 brought the six-speed intelligent manual gearbox, creating an unusual combination within the C-HR family: a front-wheel-drive compact crossover with a small turbocharged petrol engine and a conventional clutch pedal. These changes make production date particularly relevant. An early NGX50 S-T is a 4WD CVT, while a later NGX10 may be either manual or CVT. That mechanical distinction is more significant than most of the equipment differences between S-T and G-T.

S-T GR Sport
The S-T GR Sport arrived in October 2019 with one of the most unusual factory specifications offered on a Japanese C-HR. Toyota combined the 116 PS 1.2-litre turbo engine with front-wheel drive and a six-speed intelligent manual transmission. The GR Sport chassis included a floor centre brace, dedicated suspension springs and dampers, revised stabilisers, altered steering assistance and 19-inch wheels. GR-specific bumpers, a large front grille, sports seats and aluminium pedals completed the package.
When first introduced, the S-T GR Sport was exclusively a front-wheel-drive manual. In August 2020, Toyota added Super CVT-i versions, including four-wheel drive. Consequently, later S-T GR Sport advertisements can describe quite different cars. The original manual has a more involving character, while the CVT and 4WD alternatives prioritise convenience and traction. None received additional engine power, and the GR Sport name does not mean the car shares the engine of a GR Yaris or another dedicated GR performance model.

S-T LED Edition
The S-T LED Edition was introduced in November 2017, combining the original entry-level turbo grade with Toyota's more sophisticated lighting package. It retained the 116 PS 8NR-FTS engine, four-wheel drive and Super CVT-i, but received Bi-Beam LED headlights, sequential indicators, LED daytime running lights and LED rear combination lamps. Chrome-finished front door handles added another exterior detail.
This was the only drivetrain arrangement offered for S-T at the time, since front-wheel-drive turbo models did not arrive until May 2018. The edition therefore represents a clearly identifiable early Japanese specification. It combines the simpler S-T interior with the exterior lighting of a higher-grade car. Buyers interested in the original C-HR design may prefer it to the later facelift, although the original LED assemblies and any previous repairs should be examined closely.

S-T LED Package
The S-T LED Package followed in May 2018, coinciding with Toyota's introduction of front-wheel-drive turbo models. It retained the 116 PS 8NR-FTS engine and Super CVT-i, but could now be ordered with either front-wheel drive or electronically controlled four-wheel drive. The LED Package added Bi-Beam headlights, sequential indicators and LED daytime running lights while keeping the simpler S-T interior and 17-inch wheel specification.
This makes the S-T LED Package more varied than the earlier LED Edition. An NGX10 front-wheel-drive example and an NGX50 four-wheel-drive car share the same lighting and basic engine, but differ in their drivetrain arrangements. Neither should be confused with the six-speed manual introduced in October 2019. The combination of drivetrain, original lighting and production period provides a straightforward way to identify the correct Japanese specification.
The biggest mistake buyers make when choosing a Toyota C-HR
Paying extra for the appearance or special-edition badge without checking what is underneath
The C-HR is a car that can easily be bought on appearance alone. Toyota offered some striking colour combinations, particularly with the Mode Nero editions, while GR Sport added a more aggressive front bumper, larger wheels and a noticeably different stance. With so many Japanese specifications available, it is tempting to find one that looks right, has relatively low mileage and falls within budget.
Similar-looking Japanese C-HRs can have different engines, transmissions and drivetrains. Take the G and G-T, for example. Both occupied the upper end of the Japanese range and offered similar levels of equipment, but the G used Toyota's 1.8-litre hybrid system with front-wheel drive. The G-T had a 1.2-litre turbocharged petrol engine, with front-wheel drive or four-wheel drive depending on production year. The hybrid is particularly well suited to town driving and regular commuting, while the turbo offers a more conventional petrol-engine experience.
The confusion becomes greater with GR Sport. A Japanese S GR Sport is a front-wheel-drive hybrid with an electronic transmission, while an S-T GR Sport can be a front-wheel-drive six-speed manual or a CVT model, including versions with four-wheel drive. The GR Sport name alone does not tell you which configuration is being advertised.
Special editions create another consideration. A G Mode Nero from 2018 may look remarkably similar to a later Safety Plus model, but the newer car can have considerably more useful equipment. The panoramic camera and parking-support braking are particularly welcome in a C-HR, where the narrow rear windows and thick rear pillars make reversing visibility less straightforward than in a more conventional SUV.
There is also the question of wheel size. GR Sport's 19-inch wheels give the car its distinctive appearance, but their low-profile tyres produce a different ride from the 17-inch wheels fitted to the standard S. On poorly surfaced Irish roads, that is something worth considering before choosing purely on looks.
Before comparing Japanese asking prices, narrow the search to the engine, drivetrain, transmission and equipment you actually want. Then consider production year, condition, mileage and the estimated Irish landed cost.
For everyday commuting in Ireland, a well-equipped C-HR hybrid G may be more suitable than a GR Sport. Buyers looking for a manual should concentrate on the appropriate NGX10 turbo specifications rather than choosing a car based on its colour or special-edition badge.
Same shape, very different specifications
A Japanese C-HR G hybrid and an S-T GR Sport six-speed manual might look closely related, but they offer completely different driving experiences. Add turbocharged 4WD models, distinctive Mode Nero editions and increasingly sophisticated safety equipment, and the Japanese C-HR range becomes considerably more varied than its familiar styling suggests.
Toyota C-HR FAQ
Is importing a Toyota C-HR from Japan worth it compared with buying one in Ireland?
It can be, particularly if you're looking for a specific Japanese grade, colour or equipment package that is difficult to find locally. Japan offers hybrid G and S models, 1.2-litre turbo versions with front-wheel drive or 4WD, manual S-T GR Sport models and several Mode Nero special editions. However, some of these distinctions are subtle, and a Japanese C-HR is not automatically better equipped or cheaper than an equivalent Irish-market car.
The comparison needs to be made using the complete landed cost, not the Japanese asking price. Shipping, customs clearance, VAT, VRT, registration and any necessary equipment changes can alter the result considerably. For a relatively common hybrid specification, an Irish-market example may offer better value once those expenses are included. Importing becomes more interesting when Japan has a particular car that genuinely meets your requirements.
How much does it cost to import a Toyota C-HR from Japan to Ireland?
Japanese Toyota C-HR retail prices currently range from approximately ¥1 million to ¥3.9 million+ (€5,700–€22,300+), depending on the year, mileage, condition and factory specification. Earlier S and G hybrids, along with 1.2-litre turbo models, generally occupy the more affordable end of the market. Later GR Sport and Mode Nero Safety Plus editions, particularly those with low mileage, tend to command higher prices.
However, the Japanese purchase price is only one part of the overall cost. Whether you buy from a dealership or through a Japanese auction, there are several expenses involved in preparing the vehicle, transporting it to Ireland and registering it for Irish roads.
1. Purchasing the vehicle in Japan
Vehicle purchase price: The advertised dealership price or final successful auction bid.
Auction house fees: Applicable when purchasing through an auction, including the auction's transaction and associated handling charges.
Auction agent or bidding fees: The cost of having an authorised agent inspect, bid on and purchase the vehicle on your behalf, where charged separately.
Dealership administration charges: Depending on the seller, these may include vehicle preparation, documentation and handling. Some are already included in the advertised price.
Japanese taxes and recycling-related charges: Certain amounts may be included in the purchase price, charged separately or adjusted as part of the export process.
Vehicle inspection: An optional independent inspection, particularly useful when confirming mechanical condition, previous repairs or hybrid system health.
2. Japanese transport and export preparation
Deregistration and export documentation: Required for vehicles being exported, whether purchased from an auction or dealership. This includes obtaining the relevant Japanese export certificate.
Inland transportation in Japan: Moving the C-HR from the dealership or auction location to the exporter's facility, storage yard or departure port.
Japanese storage and handling: Charges for keeping, moving or preparing the vehicle before its shipping date.
Japanese port and export handling: Export customs procedures, shipping documentation and relevant port administration.
Container loading and securing: If container shipping is selected, additional charges may apply for loading, securing and preparing the vehicle inside the container. This is often referred to as vanning.
3. International shipping and insurance
There are two principal shipping methods to consider:
RoRo shipping: The vehicle is driven onto and off a specialised car carrier. Availability, sailing routes and charges depend on the shipping company and destination.
Container shipping: The vehicle travels secured inside a shipping container, either shared with other vehicles or in a dedicated container. Loading, securing and container-handling expenses must be considered.
Both options involve international ocean freight, and marine cargo insurance should be considered separately unless the quotation explicitly includes it. Shipping charges have increased recently, so current rates and available routes should be confirmed before purchasing.
4. Arrival and customs clearance in Ireland
Irish port handling: Charges associated with receiving and processing the vehicle or container at the arrival port.
Irish shipping agent: Local shipping-line administration, documentation, container release and other relevant services.
Irish customs broker: Preparation and submission of the import customs declaration and associated clearance work.
Customs duty: The applicable import tariff depends on the vehicle's classification and whether it qualifies for preferential treatment under the EU-Japan Economic Partnership Agreement. Buying a vehicle in Japan does not automatically establish preferential origin. Eligibility and supporting documentation, such as a valid statement on origin or acceptable importer's knowledge, should be confirmed before calculating the final duty.
Import VAT: Currently 23%, calculated on the relevant customs value, including applicable transport, insurance, duty and other amounts required under customs valuation rules.
Container unloading or vehicle release: Container unpacking, vehicle recovery and terminal release charges, where applicable.
Irish storage: Additional costs may arise if the vehicle or container remains at the port beyond the permitted collection period.
Inland transportation in Ireland: Moving the C-HR from the arrival port to the importer's premises, a storage location or its final destination.
5. Irish registration and final preparation
Vehicle Registration Tax (VRT): Calculated by Revenue using the vehicle's assessed Irish market value and applicable CO₂ emissions rate.
NOx charge: An additional emissions-based component of VRT, determined using acceptable nitrogen oxide emissions information.
NCTS registration appointment: The vehicle must be presented for registration, with any optional appointment-handling service charged separately.
Registration plates and related administration: Producing Irish number plates and completing the necessary registration arrangements.
Fuel and collection: Fuel, local vehicle movements and any delivery arrangements following registration.
Equipment adjustments: Where necessary, changes to Japanese navigation, radio, infotainment or other equipment for use in Ireland.
6. Import services and payment expenses
If you choose a professional importer, there may also be an import service fee covering the management and coordination of the process. Currency conversion charges, international bank transfers and other payment-related expenses should also be considered.
An important distinction is that auction purchases and dealership purchases do not have identical fee structures. Auction vehicles normally involve auction-specific transaction and bidding charges, while dealerships may have their own administration and preparation fees. Both routes require export documentation, deregistration, transportation and shipping arrangements. Some service providers bundle several charges together, while others list them individually.
The final cost depends on the C-HR you choose, where it is located in Japan, how it is purchased, the shipping method and whether you organise the import independently or use an importer.
Rather than quoting a single landed price that may not apply to your preferred vehicle, we recommend completing our Get Toyota C-HR Import Options form. Tell us which year, grade and specification interests you, together with your budget, and we'll help you explore suitable Japanese options and establish a more accurate picture of the potential costs.
Our service is completely free to buyers, with no obligation to proceed.
How much VRT will I pay when importing a Toyota C-HR from Japan to Ireland?
VRT on a Japanese Toyota C-HR depends on its age, Revenue's Open Market Selling Price (OMSP), CO₂ emissions and NOx charge. To give you an idea of the costs, we checked Revenue's official VRT calculator on 18 November 2026 for two Japanese 1.8-litre hybrid models.
2018 Toyota C-HR hybrid (DAA-ZYX10): approximately €2,075 VRT. Based on June 2018 registration and 60,000 km, Revenue calculated a current OMSP of €11,574, a CO₂ rate of 12.75% (€1,475) and a €600 NOx charge.
2022 Toyota C-HR hybrid (6AA-ZYX11): approximately €2,997 VRT. Based on June 2022 registration and 40,000 km, Revenue calculated a current OMSP of €22,836, a CO₂ rate of 10.5% (€2,397) and a €600 NOx charge.
Interestingly, the newer C-HR has a lower CO₂-based VRT percentage, but its higher assessed Irish market value results in a larger tax bill. Both calculator examples included a €600 NOx charge, the maximum applicable to petrol and non-diesel hybrid cars. Revenue may calculate a lower amount where acceptable evidence of the vehicle's actual NOx emissions is provided. For Japanese imports, this information can be obtained from the Japanese Ministry of Land, Infrastructure, Transport and Tourism.
These figures suggest budgeting roughly €2,100–€3,000 for VRT in the two hybrid examples examined, but they are not a fixed range for every Japanese C-HR. The final amount depends on the individual vehicle, its accepted emissions documentation and Revenue's valuation at registration. Always check the latest estimate before purchasing, particularly if considering a 1.2-litre turbo or GR Sport specification.
Should I choose the Japanese Toyota C-HR hybrid or the 1.2-litre turbo?
The hybrid is generally the more natural choice for regular commuting, urban traffic and drivers who prefer an automatic. Its 1.8-litre petrol engine works with an electric motor to produce 122 PS, using Toyota's electronic power-split transmission. All Japanese hybrid C-HRs are front-wheel drive, including the G, S and S GR Sport. They do not require external charging.
The 1.2-litre turbo is quite different. It produces 116 PS and 185 Nm, with front-wheel-drive and four-wheel-drive versions available depending on production year. The later front-wheel-drive turbo models also offered a six-speed manual gearbox. Someone looking specifically for 4WD or a conventional manual transmission will therefore need the turbo. Neither engine is universally the better choice. Your mileage, driving conditions and preferred transmission should determine which one deserves attention.
Are Japanese Toyota C-HR hybrids reliable, and should I worry about the hybrid battery?
Toyota's 1.8-litre hybrid system is widely used across the manufacturer's range, but the condition of an individual Japanese C-HR still needs to be established before purchase. Battery age, maintenance history, previous repairs and any stored diagnostic faults are more useful than relying on the model's general reputation. That's encouraging, particularly for buyers considering older or higher-mileage examples. However, every car has its own history, and even a generally reliable model can develop problems through poor maintenance, previous damage or neglect.
We would never recommend committing to a vehicle in Japan without first gathering as much information as possible about its history and condition. A proper pre-purchase inspection is always strongly recommended, ideally including hybrid system diagnostics, battery health assessment, service records and checks for previous accident repairs. Japanese auction sheets provide useful information, but they are not a substitute for a thorough mechanical inspection.
A Japanese Toyota C-HR hybrid can be a practical import for Irish buyers, particularly when the car has a clear maintenance history and its hybrid system has been checked. Auction grades, mileage and photographs are useful starting points, but they should be considered alongside inspection findings and the estimated Irish landed cost.
Is the Toyota C-HR GR Sport actually different from a standard C-HR?
Yes. Toyota introduced S GR Sport and S-T GR Sport in Japan in October 2019 with genuine chassis modifications rather than simply fitting GR badges and different bumpers. The changes included additional body reinforcement, dedicated suspension tuning, revised steering assistance and 19-inch alloy wheels. The interior also gained GR-specific seats and a smaller steering wheel.
The distinction between the two versions is important. S GR Sport uses the 122 PS hybrid system with front-wheel drive, while S-T GR Sport has the 116 PS turbocharged petrol engine. The latter originally arrived as a front-wheel-drive six-speed manual, with CVT and four-wheel-drive alternatives following in August 2020. Neither has more engine power than the corresponding ordinary C-HR. The difference lies in steering response, body control, wheel specification and the resulting driving experience.
What is the difference between the Toyota C-HR Mode Nero, Safety Plus, Safety Plus II and Safety Plus III?
The original Mode Nero arrived in December 2018 as a black-themed special edition of the G hybrid and G-T turbo. Its main features were black-painted alloy wheels, dark interior finishes and dedicated upholstery. The first Mode Nero Safety Plus, introduced in August 2020, added more useful parking technology, including a Panoramic View Monitor, parking-support braking and rear cross-traffic automatic braking.
Safety Plus II followed in June 2021 with matte-black wheels, dark-smoke chrome details, black-accented LED headlights and revised interior trim. Safety Plus III arrived in August 2022 with another distinctive appearance package, including brown seat accents, beige stitching and a special black exterior colour. The underlying hybrid and turbo engines remained unchanged throughout these editions. Buyers should therefore compare the actual equipment and original interior condition rather than assuming the newest Safety Plus badge automatically delivers a substantial mechanical improvement.
Will Japanese Toyota C-HR navigation, radio and other equipment work properly in Ireland?
Yes, most everyday infotainment functions can be made compatible with Irish requirements, and specialist conversion services are available in both Ireland and the UK. The Japanese C-HR is already right-hand drive, with a speedometer displaying kilometres per hour, so neither requires conversion. The main differences concern the original Japanese navigation system, radio frequencies and language settings.
Fortunately, these are generally manageable. Depending on the factory head unit, specialists can convert supported systems or install a replacement with English menus, Irish radio reception, Apple CarPlay, Android Auto and navigation through applications such as Google Maps. From October 2019, Toyota fitted Display Audio and connected-car hardware as standard on Japanese C-HRs. Smartphone integration depends on the installed equipment and software, so Apple CarPlay and Android Auto compatibility should be confirmed for the individual vehicle rather than assumed from its registration year.
The original reversing camera and steering-wheel controls can often be retained using suitable adapters. More advanced equipment, particularly the Panoramic View Monitor and Japanese connected services, requires additional compatibility checks. Toyota Safety Sense functions should also be inspected independently rather than assuming an infotainment conversion affects them.
Before purchasing, we recommend confirming the original head-unit model and checking which functions will work in Ireland. In most cases, the infotainment system should not be a major obstacle to importing a Japanese C-HR, although the exact conversion and any limitations should be established beforehand.
What should I check before buying a Toyota C-HR from a Japanese auction?
Start with the inspector's written comments rather than relying on the auction grade alone. Check the damage map for repaired or repainted panels, then compare the recorded mileage, maintenance history and overall condition. Particular attention should be paid to front-end repairs, suspension damage, wheel condition and evidence of flood exposure. A high auction grade is encouraging, but it does not guarantee the absence of mechanical problems.
For hybrid models, request information on the hybrid system and any diagnostic faults. Turbocharged cars require careful checks of engine maintenance, transmission operation and previous modifications. GR Sport models deserve additional attention to their original suspension and 19-inch wheels. The chassis code, factory grade and transmission should match the advertisement, especially where a seller describes the car only as a C-HR G-T or GR Sport. Where possible, obtain an independent inspection before committing to the purchase.
What documents do I need to register a Japanese Toyota C-HR in Ireland?
The Japanese Export Certificate is an essential document, together with evidence of the vehicle's identity, purchase details and customs clearance. Revenue also requires acceptable CO₂ and NOx information for VRT assessment. You should confirm that the chassis details, model description and weight match the documents supplied. Revenue requires certified English translations of the Japanese emissions documentation used for registration. The vehicle description and weight must also match the Japanese Export Certificate so that the correct CO₂ and NOx figures can be verified.
Once the car arrives in Ireland, the NCTS registration appointment must be arranged within seven days, and the vehicle must be registered within 30 days of entering the State. You'll need the relevant customs declaration information and proof of the required import taxes, followed by payment of the assessed VRT. The process can be handled independently or through an importer, but the paperwork should be organised before the car leaves Japan rather than after it reaches an Irish port.
Before you import
Check the chassis code, production date and original factory specification to confirm the engine, drivetrain, transmission and equipment.
For hybrids, examine the service history, battery condition and any recorded diagnostic faults. The 1.2-litre turbo requires careful checks of its maintenance history and transmission. GR Sport models also deserve attention to their wheels, suspension and any modifications. An independent inspection can reveal issues that Japanese auction sheets and photographs may miss.
Consider how the equipment will work in Ireland. Later C-HRs offer useful parking cameras and safety technology, but Japanese navigation, radio and infotainment functions may require adaptation.
Finally, calculate the full Irish landed cost, including shipping, insurance, customs duty, VAT, VRT and any applicable NOx charge. Confirm the emissions details for the exact model before comparing Japanese asking prices or committing to a purchase.
Find your Toyota C-HR in Japan
Whether you're considering a Toyota C-HR hybrid G, a 1.2-litre turbo G-T, a GR Sport or a late Mode Nero Safety Plus III, the Japanese market offers several specifications worth comparing before importing to Ireland.
Tell us which model interests you, your preferred equipment and your budget. We'll help you explore available Japanese retail options, understand the likely import costs and consider whether an auction or another sourcing route might offer better value.
Explore Japanese C-HR listings and make an informed decision before committing to an import.
JDM Guides
Looking for more information? Explore our most popular import guides covering costs, VRT, buying advice and everything involved in importing a car from Japan to Ireland.
Choosing the right car isn't just about finding the right make, model or budget. When importing from Japan, the exact specification can dramatically influence what you'll pay by the time the vehicle reaches Ireland. Two cars that appear almost identical may have completely different VRT calculations, running costs and long-term value, because of...
Choosing the best Japanese wheelchair accessible vehicle isn't about buying the most expensive model or the one with the biggest badge. It's about finding the WAV that best suits your mobility requirements, family, passengers and everyday lifestyle. For some buyers, that may be a compact family WAV such as the Toyota Sienta, Honda Freed, Toyota...
The Toyota Chaser JZX100 has quietly become one of Japan's most sought-after performance saloons. Once considered an affordable alternative to the Nissan Skyline, today's best examples are increasingly difficult to find, with clean, original cars attracting strong demand from enthusiasts across Europe, Australia and the United States. As...
"Importing a car from Japan sounds risky. There has to be a catch. I'd rather see the car before buying it. The paperwork must be a nightmare. What if the car arrives with hidden problems?" If you've ever considered importing a car from Japan, you've probably heard at least one of these before. Friends, family, online forums and social media...
To import a car from Japan yourself, you choose and verify the vehicle, buy it, arrange export and shipping, clear customs, pay taxes, complete VRT and register it in Ireland. Importing independently does not mean completing every task without professional assistance. You will still normally need a Japanese exporter or auction agent, a shipping...












