Subaru BRZ Import Ireland: Buyer's Guide 


Two boxer engines, Japanese STI specifications and the details worth checking before choosing your BRZ.

Compare Japanese ZC6 and ZD8 models, from standard R and S grades to rare STI editions, with guidance on specifications, condition and estimated Irish import costs.

A Japanese Subaru BRZ listing can mention STI without describing a genuine STI factory specification. The original ZC6, introduced in March 2012, ranged from the equipment-light RA and R Customization Package to the better-equipped S, GT and specialised tS editions. All used the naturally aspirated 2.0-litre FA20 boxer engine, but there were important changes during production. The August 2016 revision increased manual output from 200 to 207 PS, altered gearing and suspension settings, and brought further chassis improvements. The GT subsequently introduced Brembo brakes and SACHS dampers, while STI developed its own suspension and chassis packages for selected versions. Two Japanese BRZs advertised at similar prices can therefore differ considerably in factory equipment, driving characteristics and the modifications made by previous owners.


The second-generation ZD8 arrived in August 2021 with a larger 2.4-litre FA24 producing 235 PS and 250 Nm, giving the BRZ substantially stronger torque at lower engine speeds. Japanese buyers could choose R and S grades, followed by STI Sport and limited specifications including Cup Car Basic, Purple Edition, Yellow Edition and the motorsport-developed STI Sport Type RA. Some of these changes go well beyond appearance, with dedicated dampers, braking equipment and even specially balanced engine components on selected models. For an Irish buyer, choosing between a well-kept ZC6 manual, a newer ZD8 or a rare factory edition means looking beyond the advertised mileage and bodywork. This guide examines the genuine Japanese specifications, mechanical differences, previous circuit use and inspection concerns, alongside the costs involved in purchasing, shipping and registering a Subaru BRZ in Ireland.

The Evolution of the Subaru BRZ


How the FA20 and FA24 generations differ in engine output, chassis construction and factory equipment 

When the BRZ entered Japanese showrooms in March 2012, Subaru was doing something unusual for a manufacturer associated with turbocharged engines and all-wheel drive. Developed alongside Toyota, the ZC6 combined a naturally aspirated 2.0-litre FA20 boxer engine with rear-wheel drive, a six-speed manual or automatic gearbox and a low driving position. Its 200 PS output was respectable, but the emphasis was on balance, steering response and allowing the driver to use the chassis without excessive power. The initial RA, R and S grades offered different levels of equipment around the same mechanical layout.

Subaru Tecnica International began developing the BRZ's handling almost immediately. The 2013 tS introduced additional chassis reinforcement, STI suspension tuning, Brembo brakes and larger wheels. A further tS followed in 2015, demonstrating how much Subaru could change the car's behaviour without increasing engine output.

August 2016 brought the first generation's most substantial mechanical revision. Manual models gained revised intake and exhaust components, increasing output from 200 to 207 PS and torque from 205 to 212 Nm. Subaru also shortened the final-drive ratio, strengthened parts of the engine and gearbox, revised the dampers and springs, and improved body rigidity. Automatic models retained 200 PS. The new GT grade combined Brembo brakes with SACHS dampers, while STI Sport followed in 2017 with its own chassis tuning and interior specification.

The second-generation ZD8 arrived in August 2021 with a larger 2.4-litre FA24 boxer engine producing 235 PS and 250 Nm. The extra displacement made a noticeable difference to the engine's flexibility, with peak torque arriving at 3,700 rpm rather than high in the rev range.  

Subaru also strengthened the body, revised the suspension and introduced a more rigid platform structure. The BRZ retained its rear-wheel-drive layout, six-speed transmission choices and naturally aspirated engine.

Development continued beyond the new engine. The Cup Car Basic arrived in 2022 with factory motorsport preparation, including a roll cage and additional cooling equipment. In September 2023, Subaru introduced EyeSight driver assistance on manual models and added the STI Sport grade, featuring dedicated suspension tuning and frequency-responsive front dampers.

The July 2024 revision introduced a manual-specific SPORT mode with revised throttle response, alongside further steering and damper adjustments. Subaru then applied experience from Japanese Super Taikyu competition to the limited 2025 STI Sport Type RA, giving it a precisely balanced FA24, dedicated suspension and rev-matching and flat-shift functions.

Announced in July 2026, the ZD Type F update introduced a revised six-speed manual gearshift mechanism and an enhanced EyeSight camera system, with the updated specification listed by Subaru from August 2026.

For someone comparing Japanese BRZs, the production year can therefore reveal more than an exterior facelift. A 2013 ZC6, a 2018 STI Sport and a 2026 ZD8 differ in engine response, chassis tuning and driver-assistance equipment. The original factory specification matters particularly when previous owners have changed suspension, brakes or engine-management components.

Subaru BRZ ZC series

Subaru BRZ ZC series (March 2012 – March 2021)


Japanese ZC6 grades, factory equipment and mechanical changes from 2012 to 2021 

The first-generation Subaru BRZ arrived in Japanese dealerships in March 2012, offering something unusual within Subaru's range: a naturally aspirated boxer engine driving the rear wheels. Developed alongside Toyota's 86, the ZC6 combined a low-mounted 1,998 cc FA20 engine with a compact coupe body, six-speed manual or automatic transmission and a chassis designed to respond to relatively small steering and throttle inputs. The original engine produced 200 PS, but Subaru deliberately offered several equipment levels, allowing buyers to choose anything from a basic car intended for modification to a more comprehensively equipped road-going coupe.

The first Japanese range consisted of RA, R and S. RA was the simplest specification, while R added practical road equipment and S introduced a more complete interior and larger wheels. Subaru subsequently developed the RA Racing for Japanese one-make competition, while STI introduced the tS in 2013 with substantial suspension, brake and chassis improvements. The Premium Sport Package took a different direction, concentrating on interior materials and distinctive factory finishes.

The August 2016 revision brought more than revised bumpers and lighting. Manual versions received an upgraded FA20 producing 207 PS and 212 Nm, while the chassis, steering and suspension were also refined. The GT followed with Brembo brakes and SACHS dampers, and STI Sport arrived in October 2017 with dedicated suspension tuning, 18-inch wheels and a Bordeaux-red interior.

The Japanese ZC6 was also available in several notable limited editions, including the 2016 GT Yellow Edition, the 100-car STI Sport Cool Grey Khaki Edition and two distinct periods of tS production. Importantly, the 2013 tS GT Package and 2015 tS were not identical cars. Each had its own factory equipment and production allocation.

For someone importing a BRZ from Japan, the question is how much of the car's current specification is original. A standard S with aftermarket Brembo brakes, STI badges and suspension upgrades may look similar to a GT or STI Sport, but its factory identity is different. Production revision, transmission, brake equipment, suspension components and documented history should all be considered when comparing Japanese asking prices.


Current Japanese Retail Price: Approximately ¥700,000–¥3,200,000+ (€4,000–€18,200+ / $4,400–$20,000+). This indicative range reflects advertised Japanese ZC6 retail stock rather than the combined BRZ market, which also includes newer ZD8 models. Lower-priced cars are generally older or higher-mileage examples, sometimes with modifications or repair history. Later manual cars with desirable factory equipment can cost substantially more. A low-mileage STI Sport, an original tS or a well-preserved limited edition may be advertised beyond the upper end of the ordinary ZC6 market. The original production allocation, condition and completeness of edition-specific parts can influence those prices considerably. These are Japanese vehicle asking prices, not auction hammer prices or Irish landed costs.

Import cost considerations: Japanese retail prices exclude inland transport, export administration, shipping, marine insurance, customs duty, Irish VAT, VRT and registration-related expenses. None of the first-generation BRZ models currently qualifies for Ireland's over-30-year vintage VRT rate. Obtain an appropriate VRT estimate based on the individual car's details before calculating the total import cost. Inspection expenses and potential mechanical work should be budgeted separately.

Engine output: All Japanese ZC6 models used the 1,998 cc FA20 boxer engine. From launch, it produced 200 PS at 7,000 rpm and 205 Nm at 6,400–6,600 rpm. The August 2016 revision increased output on six-speed manual models to 207 PS at 7,000 rpm and 212 Nm at 6,400–6,800 rpm. Six-speed automatic models retained 200 PS and 205 Nm. STI-developed tS models retained the factory engine output applicable to their production period.

Engine: The FA20 is a naturally aspirated, horizontally opposed four-cylinder petrol engine with 1,998 cc displacement, DOHC, 16 valves, dual active valve control and a 12.5:1 compression ratio. It combines Subaru's boxer-engine construction with Toyota's D-4S direct and port fuel-injection system. The timing system uses chains rather than a scheduled timing belt. The 2016 manual-engine revision introduced changes to intake and exhaust components, pistons and internal strengthening. Oil maintenance, cooling-system condition and evidence of previous tuning remain important when inspecting Japanese examples.

Best for: Drivers looking for a Japanese rear-wheel-drive coupe with a naturally aspirated boxer engine, manual gearbox and a wide choice of factory chassis specifications. R and S models suit ordinary road use, while GT and STI Sport offer additional performance equipment. RA Racing and the STI-developed tS versions appeal to buyers with more specialised requirements.

Body style: Two-door, four-seat fixed-roof coupe with a conventional boot lid and folding rear seatbacks. The standard ZC6 measures approximately 4,240 mm long, 1,775 mm wide and 1,285 mm high to the roof, with a 2,570 mm wheelbase. Height and overall length can vary slightly with factory aerodynamic equipment. Kerb weight generally falls around 1,190–1,270 kg depending on grade, equipment and transmission. The compact cabin and small rear seats make it better suited to two regular occupants than four adults.

Drive: Rear-wheel drive throughout Japanese production. The boxer engine sits low and towards the centre of the vehicle to reduce the centre of gravity. Front suspension uses MacPherson struts, while the rear uses a double-wishbone arrangement. A Torsen limited-slip differential was fitted to many road-going specifications, although equipment differed on the original basic RA. Later factory performance versions introduced dedicated suspension components, improved chassis bracing and revised stability-control calibration.

Transmission: Six-speed manual and six-speed electronically controlled automatic transmissions were available across most Japanese road-going specifications. The original RA and RA Racing were manual-only, while the R Customization Package was offered with both transmissions during part of its production life. The August 2016 revision introduced a shorter final-drive ratio on manual cars, changing acceleration characteristics. Automatic versions retained their own gearing and engine-output specification.

Notable features: Naturally aspirated FA20 boxer engine, D-4S fuel injection, rear-wheel drive, low-mounted engine, six-speed manual or automatic transmission and independent rear suspension. Later Japanese developments included the 2013 tS, RA Racing, Premium Sport Package, the 2016 engine and chassis revision, GT with Brembo brakes and SACHS dampers, STI Sport and several limited factory editions.


Why Subaru's applied-model code matters more than the registration year

Japanese BRZ advertisements frequently refer to Type A, Type B, Type E or Type H. These are Subaru's applied-model revisions, not equipment grades.

The distinction is useful because Subaru made changes to the ZC6 throughout production, and some of the most significant updates arrived partway through a calendar year.

The original Type A corresponds to the March 2012 launch specification. Type B followed in September 2013, with further revisions identified as Type C in June 2014 and Type D in April 2015.

Type E, introduced in August 2016, is especially important. It identifies the major facelift period when Subaru revised the engine, suspension, body rigidity, steering and electronic stability-control calibration.

For manual cars, Type E also brought the increase to 207 PS and the shorter final-drive ratio. Automatic cars retained their 200 PS output.

The later Type F arrived in October 2017, followed by Type G in September 2018 and Type H in April 2019.

These distinctions are relevant when an advertised BRZ has been modified. A 2015 Type D fitted with later headlights and bumpers is still mechanically different from a factory Type E. Similarly, a Type E S with STI accessories is not automatically an STI Sport.

A buyer should therefore establish the original applied model using Subaru's identification information, then compare it with the engine, gearbox, suspension and braking equipment currently installed.

It is a useful check when two Japanese cars have similar mileage and asking prices but belong to different revision periods.


Japanese Subaru BRZ ZC series grades

The ZC6 range included ordinary production grades, equipment-focused special editions, competition-prepared cars and complete STI-developed models.

RA and R Customization Package provided relatively basic starting points. R and S were the conventional road-going specifications, while GT and STI Sport added progressively more specialised chassis equipment.

RA Racing served a different purpose altogether, with factory competition preparation. The Premium Sport Package concentrated on interior quality, while Yellow Edition and Cool Grey Khaki Edition were limited factory specifications.

The tS and tS GT Package were developed by Subaru Tecnica International. Their differences go beyond badges and cosmetic accessories.

The following order runs from the simplest factory specification to the more specialised and comprehensively equipped versions. It is not a ranking of condition, investment potential or suitability for every buyer.


RA

RA was the original entry-level Japanese BRZ, introduced in March 2012 as a starting point for owners intending to personalise their cars. It used the 200 PS FA20 with a six-speed manual gearbox and rear-wheel drive. Subaru kept the specification deliberately basic, using 16-inch steel wheels and reducing equipment compared with R and S. Air conditioning and certain convenience features were omitted from the standard specification, although factory options could alter individual cars.

The RA's main attraction is its relatively straightforward original configuration. However, many examples have subsequently received aftermarket suspension, wheels, seats, brakes or engine modifications. When considering one for Ireland, establish whether the car still has its original equipment or has been developed into a track or drift project. The absence of a particular comfort feature may be correct for the factory grade rather than evidence of missing or damaged parts.


R Customization Package

The R Customization Package became a Japanese catalogue specification in the middle of the ZC6's production life. It provided a lower-cost alternative to the regular R, retaining the FA20, rear-wheel drive and a choice of six-speed manual or automatic transmission during earlier production. Factory equipment included 16-inch wheels, manual air conditioning and practical road-car features, while leaving owners scope to select their preferred wheels and other upgrades.

Unlike the original RA, the R Customization Package was not simply a completely stripped-out car. Subaru's 2015 specification included a Torsen limited-slip differential and revised braking equipment. The automatic option disappeared during the 2016 range revision. When inspecting an example, check its applied-model code and original transmission. A later R Customization Package may share mechanical developments with the revised BRZ, but it remains a different factory equipment specification from S or GT.


R

The R was introduced in March 2012 as the standard road-going BRZ, positioned between the basic RA and better-equipped S. It offered the 200 PS FA20 with six-speed manual or automatic transmission, 16-inch wheels and a more complete set of everyday equipment. Unlike RA, it was intended to be used without requiring extensive initial customisation. Later manual versions benefited from the 2016 increase to 207 PS and the corresponding changes to gearing and suspension.

The R is worth considering when engine and structural condition matter more than leather upholstery or upgraded factory brakes. A well-maintained manual with sensible modifications may represent better value than a poorly maintained S. Check whether the original limited-slip differential, suspension and brake components remain fitted, particularly where the seller advertises the car as upgraded to GT or STI specification. Equipment added after manufacture should be assessed separately from the original grade.


S

S was the highest regular specification at the Japanese launch in March 2012. It combined the naturally aspirated FA20 with 17-inch alloy wheels, additional interior equipment, automatic climate control and more comprehensively finished seating and trim. Six-speed manual and automatic transmissions were available. The model received Subaru's successive chassis improvements, while manual cars produced from August 2016 developed 207 PS rather than the original 200 PS.

For many import buyers, S offers a sensible balance between factory equipment and purchase price. It is particularly useful to compare early and late examples because the 2016 improvements are mechanical, not simply visual. An early S with later bumpers and aftermarket suspension does not necessarily reproduce the later car's specification. Check the condition of its original seats, climate-control equipment, wheels and suspension, and establish whether any performance modifications are properly documented.


Premium Sport Package

The Premium Sport Package was introduced in December 2013 as a special edition based on the S. It retained the 200 PS FA20 and offered six-speed manual or automatic transmission, but Subaru gave the cabin a distinctive factory finish. Equipment included tan leather seats with moss-green stitching, matching door and dashboard details, an Alcantara-trimmed instrument hood, satin-silver accents and an STI push-button starter. Black 17-inch STI alloy wheels and black door mirrors completed the appearance.

This specification was designed around interior materials and finish rather than increased engine output or different suspension performance. The original tan upholstery and matching trim are therefore particularly important when assessing authenticity. A regular S fitted with black wheels or an STI starter button is not necessarily a Premium Sport Package. Buyers should check factory grade information, interior condition and whether replacement seats or door cards have removed the equipment that distinguished the edition when new.


RA Racing

Subaru introduced RA Racing in January 2013 specifically for participation in the Japanese GAZOO Racing 86/BRZ one-make series. Based on the RA, it retained the 200 PS FA20 and six-speed manual gearbox but added a six-point roll cage with side bars, a Torsen limited-slip differential, an air-cooled engine-oil cooler and improved braking equipment. Competition provisions included harness anchorages, a four-point belt supplied for competition use and dedicated tow-hook equipment.

This is not simply a basic BRZ wearing a roll cage. Subaru supplied it as a motorsport-prepared specification with equipment and warranty conditions different from those of an ordinary road model. Before considering one for Irish registration, verify the installation and legality of its present safety equipment, particularly harnesses, cage components and any further competition modifications. Previous circuit use is entirely plausible for this grade, making chassis condition, maintenance records and evidence of repairs especially important.


GT

GT joined the Japanese range in November 2016 following the major ZC6 revision. It was positioned above S and combined the updated manual FA20's 207 PS output with factory performance equipment. Subaru fitted SACHS dampers, Brembo four-piston front and two-piston rear brakes, dedicated 17-inch alloy wheels and a rear spoiler. Alcantara and leather seating with front-seat heating provided a more substantial interior specification. Automatic GT models retained the 200 PS engine output.

The GT differs from the S because its additional braking and suspension equipment was developed as a complete factory package. A standard S can be fitted with Brembo calipers and aftermarket dampers, but that does not establish GT originality. Inspect the braking hardware, suspension identification, wheel specification and factory grade. Replacement brake discs and pads should also be budgeted appropriately. For a buyer wanting a late first-generation BRZ without pursuing a rare special edition, GT is worth comparing with other late ZC6 specifications.


Yellow Edition

The ZC6 Yellow Edition was announced in July 2016 as a limited special edition based on the forthcoming GT, with production restricted to 100 cars. It combined the GT's Brembo braking system and SACHS suspension with a distinctive yellow exterior and edition-specific appearance details. The revised manual FA20 produced 207 PS, while the six-speed automatic version retained 200 PS. The edition belonged to the facelift period rather than the earlier 2015 STI-developed tS programme.

Yellow Edition should not be confused with the Sunrise Yellow tS, which also had a limited production allocation. The two cars came from different programmes and used different chassis equipment. A resprayed GT or ordinary S is not equivalent to a factory Yellow Edition. Check the original Subaru grade, paint code and factory equipment, particularly where wheels, brakes or exterior details have been replaced. Its rarity is meaningful only when the car's identity and condition can be properly established.


STI Sport

STI Sport arrived in October 2017 as the highest regular Japanese BRZ grade, jointly developed with Subaru Tecnica International. It retained the FA20 engine outputs of 207 PS for manuals and 200 PS for automatics, but introduced a more extensive chassis package. Equipment included STI-tuned SACHS dampers and springs, flexible V-braces, front flexible draw stiffeners, black 18-inch wheels with 215/40R18 tyres and Brembo brakes. The cabin received a distinctive black and Bordeaux-red leather and Alcantara interior.

Unlike a regular BRZ carrying STI accessories, STI Sport was a recognised factory grade with its own suspension calibration, wheels, exterior details and interior specification. The original dampers, braces and seat materials are worth checking because these components can be replaced during previous ownership. A genuine STI Sport also requires the correct factory identification, not simply STI badges. Buyers considering an automatic should remember that its FA20 retained the 200 PS specification rather than the manual's 207 PS.


STI Sport Cool Grey Khaki Edition

The STI Sport Cool Grey Khaki Edition was introduced in October 2017 as a six-speed manual-only special edition, limited to 100 Japanese vehicles allocated through a lottery. It retained the STI Sport's dedicated SACHS suspension, 18-inch wheels, Brembo brakes and distinctive Bordeaux-red interior. Its defining feature was the factory Cool Grey Khaki exterior, a colour that made it immediately recognisable within the Japanese ZC6 range.

Mechanically, the limited edition followed the regular STI Sport specification rather than introducing a more powerful engine. The significance lies in its original production allocation and factory appearance. When reviewing one in Japan, verify the paint code and grade documentation, and inspect carefully for repainting or repaired exterior panels. A standard STI Sport repainted in the same colour does not become a genuine Cool Grey Khaki Edition. Equally, factory authenticity should not outweigh concerns about accident history or mechanical condition.


tS

Subaru Tecnica International introduced the first BRZ tS in August 2013, followed by a separate 300-car tS programme in June 2015. Both were complete STI-developed specifications rather than ordinary BRZ grades fitted with cosmetic accessories. The original tS combined the 200 PS FA20 with STI-developed suspension components, flexible chassis bracing, larger driveshafts, Brembo brakes, 18-inch wheels and dedicated interior equipment. Manual and automatic transmissions were available.

The 2015 tS was further developed, introducing Bilstein suspension components, dedicated rear suspension links, Michelin Pilot Super Sport tyres and additional chassis calibration. It also received STI Recaro seats and distinctive interior details. Because the 2013 and 2015 cars are not identical, establish which production programme an advertised example belongs to before assessing its equipment. The original suspension, braking system, trim and STI identification are important when determining whether the car remains complete.


tS GT Package

The tS GT Package was the more specialised version of the original August 2013 tS programme. Subaru limited the first tS allocation to 500 cars, including a maximum of 250 GT Package examples. It retained the 200 PS FA20 and offered six-speed manual or automatic transmission. Beyond the regular tS chassis improvements, the GT Package received black 18-inch STI wheels, a two-position adjustable dry-carbon rear spoiler and Recaro front bucket seats with dedicated leather and Alcantara upholstery.

Its most valuable distinguishing features are not the badges but the specific factory components. The carbon rear spoiler, original seats and STI wheels should be inspected for damage, replacement or modification. These parts can be expensive to source individually and have a direct bearing on the completeness of a genuine example. A regular tS fitted with a similar rear wing is not necessarily a GT Package. Japanese factory documentation should support the identification before any collector premium is considered.

Subaru BRZ ZD series

Subaru BRZ ZD series (From August 2021)


The 235 PS FA24, revised chassis and Japanese factory specifications 

The second-generation Subaru BRZ arrived in Japan in August 2021, replacing the original 2.0-litre ZC6 with the 2.4-litre ZD8. Subaru retained the naturally aspirated boxer engine, rear-wheel drive and six-speed transmission choices, but the new 2,387 cc FA24 produced 235 PS and 250 Nm. The increase in displacement gave the car substantially more torque at everyday engine speeds, while improvements to body rigidity and suspension geometry changed how it responded to steering and throttle inputs.

Japanese buyers initially chose between R and S. Both used the same FA24, six-speed manual or automatic gearbox and Torsen limited-slip differential. R came with 17-inch wheels and a relatively straightforward equipment specification, while S added 18-inch wheels, Michelin Pilot Sport 4 tyres and a more comprehensively finished interior. The Cup Car Basic followed in February 2022, prepared specifically for Japan's GR86/BRZ one-make racing series.

Subaru introduced the 200-car S 10th Anniversary Limited in July 2022, distinguished by WR Blue Pearl paint, black exterior details and blue interior accents.  

September 2023 brought the regular STI Sport, introducing STI-tuned frequency-responsive front dampers and dedicated rear suspension settings. The same update made EyeSight driver assistance standard on manual models for the first time.

Further mechanical revisions arrived in July 2024. Subaru introduced a manual-specific SPORT mode, adjusted electric power steering assistance and revised damper characteristics on R, S and Cup Car Basic. The following year brought two limited STI Sport editions: the 200-car Purple Edition and 300-car Yellow Edition, each with distinctive factory colours, interior finishes and Brembo brakes.

November 2025 marked a different direction with the STI Sport Type RA. Limited to 300 cars across two configurations, it combined a precisely balanced FA24 engine with dedicated ZF dampers, BBS wheels, enhanced differential cooling and electronic shift-assistance functions developed from Subaru's motorsport experience.

The July 2026 update introduced further refinements to the manual gearshift mechanism and EyeSight camera system. Consequently, an early 2021 R, a 2024 STI Sport and a 2025 Type RA share the same basic engine output but differ significantly in factory equipment, handling calibration and mechanical construction.


Current Japanese retail price: Approximately ¥2,000,000–¥7,000,000 (€11,400–€39,700 / $12,500–$43,800). This is an indicative Japanese retail asking-price range across the ZD8 generation. Recent generation-specific market data places advertised used vehicles at approximately ¥2.04–6.95 million. The lower end generally consists of earlier R and S examples, while prices increase for newer manuals, STI Sport specifications and limited editions. A genuine Type RA or Type RA with Rear Spoiler should be valued separately from an ordinary STI Sport. Their original allocations were small, and resale advertisements can exceed their factory purchase prices. Other factors affecting Japanese prices include mileage, transmission, accident history, original paintwork, previous circuit use and the completeness of factory equipment. These figures are Japanese vehicle prices, not the total cost of importing one to Ireland.

Import cost considerations: Japanese asking prices exclude inland transport, export administration, shipping, marine insurance, customs duty, Irish VAT, VRT and registration expenses. Every ZD8 is considerably younger than Ireland's 30-year vintage threshold and must be assessed under the applicable VRT rules. The specific vehicle's year, engine, emissions information and registration details should be established before calculating landed costs. A Cup Car Basic may also require additional assessment of its competition equipment before Irish road registration.

Engine output: All Japanese ZD8 specifications use the naturally aspirated 2,387 cc FA24 producing 235 PS (173 kW) at 7,000 rpm and 250 Nm at 3,700 rpm. These figures apply to both six-speed manual and automatic road-going models. The STI Sport Type RA retains the same published maximum output, despite its specially balanced engine components.

Engine: The FA24 is a front-mounted, longitudinally installed, naturally aspirated boxer four-cylinder with 2,387 cc displacement, DOHC, 16 valves, dual active valve control and Toyota D-4S direct and port fuel injection. Bore and stroke measure 94.0 mm × 86.0 mm, with a 12.5:1 compression ratio. The timing system uses chains. Subaru revised the engine's intake, exhaust and internal components compared with the first-generation FA20. Original engine condition, oil maintenance, cooling performance and evidence of previous ECU tuning or circuit use remain important inspection considerations.

Best for: Drivers looking for a Japanese rear-wheel-drive coupe with stronger everyday performance than the original BRZ. R and S suit conventional road use, STI Sport offers dedicated factory suspension tuning, and the limited STI editions appeal to buyers seeking more specialised equipment. Cup Car Basic is primarily relevant to motorsport-oriented buyers. 

Body style: Two-door, four-seat fixed-roof coupe with a separate boot and folding rear seatbacks. The Japanese ZD8 measures 4,265 mm long and 1,775 mm wide, with a 2,575 mm wheelbase. Factory height varies by specification, with 1,310 mm listed for regular models and 1,300 mm for certain Cup Car Basic configurations. The body incorporates aluminium panels for the bonnet, roof and front wings, helping control weight despite the larger engine and strengthened structure. Japanese kerb weight is approximately 1,260–1,300 kg, depending on grade, transmission and factory equipment.

Drive: Rear-wheel drive throughout Japanese production. The ZD8 uses a Torsen limited-slip differential, electrically assisted rack-and-pinion steering and independent suspension. Compared with the ZC6, Subaru improved structural rigidity, suspension mounting points and steering response. STI Sport and Type RA introduced their own damper specifications, while Cup Car Basic received additional cooling provisions for sustained competition use.

Transmission: Six-speed manual and six-speed electronically controlled automatic transmissions are offered on regular R, S and STI Sport models. The S 10th Anniversary Limited, Purple Edition and Yellow Edition were also available with both transmissions. Cup Car Basic and STI Sport Type RA were developed exclusively around the six-speed manual. The July 2024 revision introduced a dedicated SPORT mode for manual cars, while the Type RA added factory rev-matching and flat-shift functions through its specialised engine-control software.

Notable features: The Japanese ZD8 combines a 235 PS FA24 boxer engine, rear-wheel drive, Torsen limited-slip differential, lightweight aluminium body panels and a substantially strengthened chassis. Important developments include the factory Cup Car Basic, EyeSight for manual cars from 2023, STI Sport's frequency-responsive dampers, the 2024 SPORT mode, limited Purple and Yellow editions, and the specially balanced engine and transmission-assistance systems fitted to the Type RA.


Why the ZD8's applied-model revision can matter more than its grade

A Japanese BRZ's original grade identifies its equipment level, but Subaru's applied-model revisions establish which mechanical and electronic changes were introduced during production.

The original 2021 ZD8 was released as the A-type specification. Subsequent revisions introduced changes that were not necessarily visible from outside the car.

One particularly significant update arrived in September 2023, when Subaru added EyeSight driver assistance to manual-transmission models. Before that revision, EyeSight had been standard on automatic versions, while early Japanese manuals used a different safety-equipment arrangement.

For buyers comparing a 2022 S manual with a 2024 S manual, this distinction is worth checking independently of mileage and interior condition.

The July 2024 revision introduced another important change. Subaru added a dedicated SPORT mode to manual cars, altering electronic throttle response and active sound control. 

The same revision refined electric power steering and damper settings across several grades. These changes are separate from the STI Sport suspension package, which uses dedicated frequency-responsive front dampers and different rear damping characteristics.

The 2025 Type RA introduced a further level of technical development. Its FA24 engine received carefully controlled balancing of the pistons, connecting rods, crankshaft, flywheel and clutch cover. Subaru also added rev-matching and flat-shift functions through a dedicated ECU.

These features are not standard equipment on an ordinary STI Sport, even when it has aftermarket STI accessories.

The July 2026 revision then introduced an updated manual gearshift mechanism and wider EyeSight camera coverage.

When reviewing Japanese listings, the original applied-model designation, factory grade and production month should therefore be checked together. A vehicle's registration year alone may not establish which revision it received, particularly around the 2023, 2024 and 2026 changes.


Japanese Subaru BRZ ZD series grades

The Japanese ZD8 range began with two conventional road-going grades, R and S. Subaru subsequently expanded it with competition-prepared cars, commemorative editions and STI-developed specifications.

The S 10th Anniversary Limited, Purple Edition and Yellow Edition are genuine factory special editions, but their distinguishing features are largely equipment and appearance rather than increased engine output.

Cup Car Basic is different. It was prepared for one-make racing and includes equipment unsuitable for some everyday driving requirements. The STI Sport Type RA represents a further step, with mechanical development extending to engine balancing, suspension, differential cooling and transmission control.

The grades below are arranged from basic equipment to the most specialised factory specifications. Cup Car Basic is a motorsport-focused exception rather than a lesser car.


Cup Car Basic

Subaru introduced the ZD8 Cup Car Basic in February 2022 for Japan's TOYOTA GAZOO Racing GR86/BRZ Cup. It retained the 235 PS FA24 and six-speed manual gearbox but received competition-oriented equipment installed by Subaru Tecnica International. The original specification included a six-point roll cage with side bars, driver's six-point harness mounting points, an air-cooled engine-oil cooler and a finned rear differential case. Subaru also removed the seat-mounted side and curtain airbags and fitted appropriate electronic cancellation equipment.

The Cup Car Basic was revised in April 2024 to accommodate the introduction of EyeSight on manual BRZ models, including changes to the roll-cage arrangement. Its factory competition preparation makes it fundamentally different from an ordinary R modified for circuit use. Anyone considering one for Ireland should establish which production specification is being offered, inspect the cage and mounting points, and verify the car's current registration and safety-equipment arrangements. Previous racing use and documented maintenance are particularly important.


R

R has been the entry-level Japanese ZD8 grade since August 2021. It uses the same 2,387 cc FA24 producing 235 PS and 250 Nm as the more expensive versions, with six-speed manual or automatic transmission and rear-wheel drive. Factory equipment includes 17-inch alloy wheels with 215/45R17 tyres, LED headlights, automatic climate control, a digital instrument display and a Torsen limited-slip differential. Compared with S, it uses a more straightforward interior specification and smaller wheels.

The R shares its engine output and basic drivetrain with the higher grades, particularly for buyers prioritising condition and purchase price. Later R models benefited from Subaru's suspension, steering and electronic-control revisions, so a 2024 or 2026 example is not identical to an early 2021 car. Inspect the original wheels, suspension and engine-management software where modifications are advertised. An R with aftermarket STI badges or upgraded brakes should still be identified and valued as an R unless the factory documentation establishes otherwise.


S

S was introduced alongside R in August 2021 as the better-equipped Japanese road-going BRZ. It retained the 235 PS FA24 and six-speed manual or automatic gearbox, but introduced 18-inch alloy wheels with 215/40R18 Michelin Pilot Sport 4 tyres. Additional equipment included more substantial interior trim, Ultrasuede and leather upholstery, heated front seats and dedicated exterior and interior details. The 18-inch wheels and lower-profile Michelin Pilot Sport 4 tyres gave the S a different factory tyre specification from the R, affecting steering response, ride characteristics and available grip.

For someone intending to use a BRZ regularly on Irish roads, S offers a more comprehensively equipped cabin without introducing the specialised suspension components of STI Sport. However, the 18-inch tyres and lower-profile sidewalls deserve consideration when inspecting wheels and suspension for impact damage. Later S models received Subaru's updated electronic systems and chassis calibration. Production date, original wheel specification and service history should be established before deciding whether a particular S represents better value than an equally well-maintained R.


S 10th Anniversary Limited

The S 10th Anniversary Limited was announced in July 2022 to commemorate ten years of the Subaru BRZ. Production was restricted to 200 cars for Japan, with six-speed manual and automatic transmissions available. Based on S, it retained the standard 235 PS FA24 but added WR Blue Pearl paint, dedicated matte-black 18-inch wheels, black door mirrors and a black BRZ rear emblem. Inside, Subaru introduced blue-and-black Ultrasuede and leather upholstery, blue stitching, commemorative door-trim embroidery and a tenth-anniversary rear-window decal.

The limited edition did not receive a separate engine or suspension tune, so its distinction lies in factory appearance and production allocation. When examining a Japanese example, verify the original paint, wheels, interior trim and commemorative details. A normal S fitted with black wheels and blue stitching is not automatically a genuine anniversary car. Because some distinctive components are relatively small, an otherwise tidy example can appear complete in photographs while missing original trim pieces. Factory identification and supporting documentation are particularly useful.


STI Sport

STI Sport joined the Japanese BRZ range in September 2023 as a regular production grade above S. It retained the 235 PS FA24 and offered both manual and automatic transmission. Its principal mechanical difference was STI-developed suspension, including Hitachi Astemo Sensitive Frequency Response Dampers at the front and dedicated STI-tuned rear dampers. Subaru also fitted dark-metallic 18-inch wheels, black exterior details and a distinctive Bordeaux-and-black Ultrasuede and leather interior. Gold-caliper Brembo front and rear brakes were available as a factory option.

STI Sport is therefore more than an S with additional badges, but not every STI Sport has identical braking equipment. When comparing Japanese listings, confirm whether the Brembo option was fitted from new. The original suspension should also be identified, especially where a previous owner has installed aftermarket coilovers. A late STI Sport may include the 2024 SPORT mode and subsequent electronic revisions, depending on its production date. Its appeal lies in Subaru's complete factory suspension calibration rather than any increase in peak engine output.


STI Sport Purple Edition

The STI Sport Purple Edition was announced in January 2025, with Japanese production restricted to 200 cars allocated through a lottery. It was based on the existing STI Sport and retained the 235 PS FA24, with six-speed manual or automatic transmission. Subaru finished the body in Galaxy Purple Pearl and fitted high-lustre 18-inch wheels, black door mirrors and a black BRZ rear emblem. Brembo brakes with gold calipers were included, while the interior received dedicated black-and-grey Ultrasuede and leather upholstery, silver stitching and matching trim accents.

Purple Edition is a factory colour-and-equipment special rather than a separate performance-engine specification. The original paintwork and interior are therefore central to identifying an authentic example. A repainted STI Sport or ordinary S with similar wheels is not equivalent to the factory edition. Check the original Subaru model designation, paint code and brake equipment before considering the premium attached to its limited allocation. As with any newer Japanese special edition, documented repair history and factory completeness remain more important than the colour alone.


Yellow Edition

The second-generation Yellow Edition was introduced in September 2025 under the official name STI Sport Yellow Edition. Subaru limited it to 300 Japanese cars, based on the regular STI Sport. It retained the 235 PS FA24 and offered six-speed manual or automatic transmission. The edition featured Sunrise Yellow paint, matte-black 18-inch wheels, black exterior badging and gold-caliper Brembo brakes. Its interior received black Ultrasuede and leather upholstery with yellow stitching, yellow seat perforations and dedicated Yellow Edition embroidery on the door trims.

This specification should not be confused with the first-generation ZC6 Yellow Edition, which belonged to a different production period and factory equipment programme. The ZD8 edition benefits from the STI Sport's specialised suspension arrangement, while its visual identity comes from the distinctive paint and interior treatment. When examining one in Japan, check for paint repairs, replacement wheels and missing interior details. The original Subaru grade and production documentation should establish that the vehicle is one of the factory Yellow Edition cars rather than a standard STI Sport modified to resemble one.


STI Sport Type RA

Subaru Tecnica International announced the STI Sport Type RA in November 2025 as a limited complete-car specification drawing on development from Japan's Super Taikyu endurance racing programme. Production was restricted to 200 cars without the large rear spoiler. Its 2,387 cc FA24 retained the standard 235 PS output, but Subaru carefully balanced the pistons, connecting rods, crankshaft, flywheel and clutch cover. Additional equipment included dedicated ZF dampers, matte-grey 18-inch BBS wheels, Brembo brakes, STI flexible chassis components and a finned rear differential case.

The Type RA also introduced factory rev-matching and flat-shift functions through a dedicated ECU, together with an STI performance exhaust. It was offered exclusively with a six-speed manual gearbox. These mechanical differences make it considerably more specialised than an STI Sport fitted with aftermarket wheels and suspension. A buyer should verify the factory Type RA identification, balanced-engine specification, original BBS wheels and electronic functions. Because these cars were sold through a limited allocation, advertised prices may reflect rarity as well as the cost of their additional engineering.


STI Sport Type RA with Rear Spoiler

The STI Sport Type RA with Rear Spoiler was the more exclusive of the two November 2025 Type RA configurations, limited to 100 Japanese cars. It shared the balanced 235 PS FA24, six-speed manual gearbox, ZF dampers, Brembo braking system, finned differential case and STI-developed rev-matching and flat-shift functions with the regular Type RA. Its distinguishing additions were a dry-carbon rear spoiler and matte-bronze 18-inch STI BBS wheels, rather than the matte-grey wheels of the standard version.

The rear spoiler is an original factory component, not simply a commonly fitted STI accessory. Its condition and authenticity are particularly relevant because the large dry-carbon structure is one of the features that separates this specification from the regular Type RA. Japanese factory documentation should establish which of the two versions the car originally was. At its launch, the Rear Spoiler version cost ¥506,000 more than the standard Type RA. That original difference provides useful context, although current resale value must be judged against the individual car's condition, mileage and available market alternatives.

Subaru BRZ FAQ


Which early Japanese BRZs were affected by Subaru's valve-spring recall?

On 1 November 2018, Subaru announced recall number 4361, covering certain early ZC6 vehicles manufactured between 9 March 2012 and 2 July 2013. The affected chassis-number range was ZC6-002002 to ZC6-010144, although Subaru cautioned that not every vehicle within that range was necessarily included. The problem involved valve springs that could fracture under particular operating conditions, potentially causing engine malfunction or, in severe cases, engine stoppage.

The prescribed repair involved replacing the affected valve springs with revised components. For a Japanese import, confirm the recall status against the complete chassis number and request documentation showing whether the work was completed. A car falling within the published production period should not automatically be rejected, but an unresolved recall deserves investigation before purchase. The completion record is more useful than a seller simply stating that the engine has never caused trouble.

What should buyers know about Subaru's 2023 dry-carbon rear-spoiler recall?

Subaru Tecnica International issued recall number 5376 in October 2023 concerning certain dry-carbon rear spoilers installed on Subaru performance models, including Japanese ZC6 BRZs. The problem involved incorrectly sized mounting bolts that could loosen over time, potentially allowing the spoiler to detach from its supporting brackets. The corrective action was to replace the relevant bolts with revised components.

This is particularly relevant when examining an early STI-developed tS GT Package or a BRZ fitted with an original STI carbon spoiler. The recall covered certain factory-installed and separately supplied components, so the presence of a genuine STI spoiler does not establish whether corrective work was required. Check the spoiler's part number, mounting arrangement and recall completion history. A carbon wing may be one of the more desirable features of a particular BRZ, but its attachment hardware deserves the same scrutiny as the rest of the car.

Why does the FA20 use both direct and port fuel injection?

The first-generation BRZ's FA20 uses Toyota's D-4S system, combining direct injection into the combustion chamber with conventional port injection upstream of the intake valves. The engine-management system varies how the injectors are used according to operating conditions, balancing combustion efficiency, emissions and performance. Subaru retained this dual-injection approach when developing the larger FA24 for the second-generation BRZ.

An advantage of having port injection is that fuel can pass over the intake valves, helping limit the deposits that may develop on engines relying exclusively on direct injection. However, it does not eliminate every possible intake or fuelling problem. During inspection, investigate persistent misfires, irregular idle, injector-related fault codes and evidence of unprofessional ECU tuning. A BRZ with an aftermarket intake or modified fuel system should be assessed against its actual engine-management configuration rather than assuming the original D-4S calibration remains appropriate.

What is the difference between the FA24 oil-pickup sealant concern and oil-pressure loss during cornering?

Two separate issues have been discussed in connection with the second-generation FA24. The first concerns excess RTV silicone sealant entering the oil system and potentially collecting around the oil-pickup screen. The second involves pressure reductions observed during sustained, high-load cornering in instrumented track testing, particularly through certain right-hand bends. Removing sealant debris does not necessarily resolve the pressure behaviour recorded under those conditions.

These findings should be interpreted carefully. Independent testing has identified pressure reductions during demanding circuit use, but that does not establish that every road-going FA24 is defective or destined to fail. Subaru has stated that the BRZ was designed as a road car and that oil pressure varies with operating conditions. For a previously tracked Japanese example, ask about oil-pressure monitoring, sump inspections, cooling modifications and engine-maintenance records. A seller's statement that the oil pickup was cleaned is not evidence that every lubrication concern has been addressed.

What does the factory engine seal on a Japanese Cup Car Basic actually tell you?

Subaru's Japanese Cup Car Basic was prepared for the GR86/BRZ one-make racing series and included an engine seal as part of its competition specification. The seal provides a means of identifying interference with designated engine components under the relevant competition arrangements. It is therefore different from a conventional dealer inspection sticker or evidence that an engine has recently been serviced.

The presence of an original seal can be useful when assessing a car's competition history, but it does not establish that the engine has always been operated gently or maintained correctly. A missing or disturbed seal may have a legitimate explanation, including an authorised repair or engine replacement. Ask for race participation records, servicing invoices and details of any engine work. Also remember that Cup Car Basic models have factory competition equipment, including a roll cage and deleted side and curtain airbags, which must be considered separately when assessing road-registration requirements in Ireland.

How did Subaru adapt EyeSight to work with a manual BRZ?

The Japanese ZD8 received EyeSight for manual-transmission models during the 2023 revision. Subaru adapted the system's controls to account for a driver-operated clutch and manual gear selection. Its functions include pre-collision braking, adaptive cruise control, lane-departure warning, vehicle-sway warning, lead-vehicle-start notification and rear obstacle warning. The system was developed specifically for manual operation rather than simply transferring the automatic model's control software unchanged.

For a buyer comparing Japanese manuals from before and after the revision, the safety-equipment difference is substantial. When inspecting a later car, check for EyeSight warnings and evidence of windscreen replacement or repairs around the stereo-camera assembly. Camera positioning and calibration can be important after relevant repairs. Factory documentation should establish which system the vehicle originally received, particularly where a car has been modified for motorsport or fitted with aftermarket electronic equipment.

Why does the second-generation BRZ produce engine sound through a dashboard speaker?

Subaru introduced Active Sound Control on the ZD8 to supplement the engine noise heard inside the cabin. A dedicated speaker positioned within the dashboard produces electronically generated sound in response to engine speed and accelerator input. The purpose is to reinforce the natural character of the FA24, particularly when the engine is being used at higher speeds. It does not mean that the exhaust system is necessarily louder outside the vehicle.

Subaru confirms that the system's sound level and character cannot be independently adjusted through normal user settings, although a Subaru dealer can disable the function. Its availability depends on grade and equipment. This is worth knowing when viewing a Japanese BRZ with an aftermarket exhaust: cabin noise may reflect both the physical exhaust and Active Sound Control. If the sound differs from what you expect, establish whether the factory function is enabled before attributing everything to engine or exhaust modifications.

Why does Subaru specify premium petrol for the Japanese BRZ?

Japanese BRZ owner documentation specifies unleaded premium petrol, commonly described in Japan as high-octane or haioku. Both the naturally aspirated FA20 and FA24 use relatively high compression ratios, making the correct fuel specification important for their intended combustion characteristics and engine-management calibration. The ECU can respond to knock by adjusting ignition timing, but that should not be treated as a reason to ignore the manufacturer's fuel requirements.

For an Irish buyer, the practical question is whether the available petrol meets the specification in the Japanese owner's manual for that particular engine and production period. Do not assume that fuel sold under the Japanese premium designation is interchangeable with every petrol grade marketed in Ireland. Check the required octane rating and use an appropriate fuel. If the engine has been remapped in Japan, establish whether the calibration was developed for a particular octane rating before deciding what fuel to use.

How much does tyre choice influence the way a BRZ behaves on the road?

Subaru developed the BRZ around relatively modest tyre widths compared with many more powerful sports cars. The original ZC6 S used 17-inch wheels with 215-section tyres, while the second-generation ZD8 S introduced 18-inch wheels with 215/40R18 Michelin Pilot Sport 4 tyres. Those changes affect more than appearance. Tyre construction, compound, sidewall stiffness and operating temperature influence steering response, braking and the transition between grip and oversteer.

This makes tyre identification particularly important during a Japanese pre-purchase inspection. Two otherwise similar BRZs can feel noticeably different when one has the original road-focused tyre specification and the other uses aggressive track-oriented rubber or mismatched brands. Inspect manufacturing dates, tread condition, wheel alignment and uneven wear. Also confirm wheel offset and clearance where larger brakes or aftermarket suspension are fitted. A car's handling should not be judged without considering the tyres on which it is currently running.

How can you identify a Japanese BRZ's exact Subaru revision without relying on the advertised year?

Subaru's Japanese BRZ model information includes an applied-model designation identifying the relevant engineering revision. This is separate from the familiar R, S or STI Sport grade. Subaru's owner-documentation service explains that the applied-model information can be found on the model-identification label near the lower passenger-side door opening. For example, the ZD8's A-type specification corresponds to its 2021 introduction, while later letters identify subsequent production revisions.

This can be particularly useful where a Japanese seller advertises a registration year that overlaps two specification periods. The applied-model information helps establish which factory technical documentation applies to the vehicle, including safety systems, suspension revisions and equipment changes. It should be checked alongside the chassis number and original grade. On an imported car, retain a photograph of the identification label and the corresponding Japanese documents. They can simplify future parts identification, servicing and verification of factory equipment.

Before you import 


Before buying a Subaru BRZ in Japan, verify its factory grade, applied-model revision and original equipment. STI badges alone do not establish a genuine tS or STI Sport. Cup Car Basic models also require additional checks due to their competition equipment and modified safety systems.

For early ZC6 models, confirm whether Subaru's valve-spring recall applies and whether the work was completed. Inspect engine servicing, gearbox, differential, suspension and evidence of previous circuit use. On ZD8 examples, investigate any track-related oil-pressure concerns and engine modifications. Check accident history, structural repairs and the originality of limited-edition components.

Finally, calculate Japanese export charges, shipping, customs duty, VAT and Irish VRT. Allow for inspections and potential repairs before deciding whether the Japanese asking price represents good value.


Find a Subaru BRZ that meets your requirements


A well-kept ZC6 manual, a later 2.4-litre ZD8 or a genuine STI special edition? The Japanese market offers plenty of choice, but factory specification, previous modifications and condition can make a significant difference to what you're actually buying.

Share your budget and preferred BRZ specification. We'll research suitable Japanese examples, compare their prices and help you understand what bringing one to Ireland could cost.

Free, independent research and advice, with no obligation to purchase.


JDM Guides

Looking for more information? Explore our most popular import guides covering costs, VRT, buying advice and everything involved in importing a car from Japan to Ireland.


Japanese auction sheet damage codes are shorthand used by auction inspectors to record visible defects and previous work across a vehicle. Depending on the auction house, markings such as A can indicate scratches, U dents, W signs of paintwork or repair, S rust, C corrosion, while X and XX can identify panels requiring replacement or already...

Choosing the right car isn't just about finding the right make, model or budget. When importing from Japan, the exact specification can dramatically influence what you'll pay by the time the vehicle reaches Ireland. Two cars that appear almost identical may have completely different VRT calculations, running costs and long-term value, because of...

Choosing the best Japanese wheelchair accessible vehicle isn't about buying the most expensive model or the one with the biggest badge. It's about finding the WAV that best suits your mobility requirements, family, passengers and everyday lifestyle. For some buyers, that may be a compact family WAV such as the Toyota Sienta, Honda Freed, Toyota...

The Toyota Chaser JZX100 has quietly become one of Japan's most sought-after performance saloons. Once considered an affordable alternative to the Nissan Skyline, today's best examples are increasingly difficult to find, with clean, original cars attracting strong demand from enthusiasts across Europe, Australia and the United States. As...