Mitsubishi GTO Import Ireland: Buyer's Guide


Japanese 6G72 V6 engines, Twin Turbo and MR specifications, four-wheel-drive technology, import prices and ownership.

From the original Twin Turbo and glass-roof Special Versions to the six-speed MR and later SR, explore Japan's Z15A and Z16A GTO specifications.

The Japanese Mitsubishi GTO was built around different priorities from a lightweight, rear-wheel-drive sports car. Launched in October 1990, it combined a transverse 2,972 cc 6G72 V6 with permanent four-wheel drive in a wide, four-seat coupe. The naturally aspirated version produced 225 PS, while the intercooled Twin Turbo delivered 280 PS through a five-speed Getrag manual gearbox. The Twin Turbo was particularly ambitious for 1990. Alongside its four-wheel-drive system, Mitsubishi fitted four-wheel steering, electronically controlled suspension and movable aerodynamic components, giving the car a level of mechanical complexity rarely found in Japanese sports coupes of the period. That complexity is part of the GTO's identity, but makes the original factory specification important.


Changes during Japanese production went beyond bumpers and headlights. The 1993 revision replaced pop-up headlamps with fixed projector units and brought a six-speed manual gearbox to the Twin Turbo. Mitsubishi introduced the Twin Turbo MR in 1994, cutting weight and deleting some of the electronic and comfort equipment found on the better-equipped turbo model. SR became the naturally aspirated grade name in 1995, while the earlier Special Version and Twin Turbo Special Version had emphasised equipment such as leather upholstery and a glass roof. Later styling revisions, including a prominent rear spoiler, make GTOs from different periods easy to confuse.

A Japanese GTO listing needs more than a model year and the words 'Twin Turbo'. Z15A and Z16A chassis identifiers, five- or six-speed manual gearboxes, four-wheel-steering equipment and the original grade help establish what the car actually is. Previous modifications matter too: turbocharger changes, suspension conversions and deleted electronic systems can alter the specification considerably. This guide examines the Japanese factory versions, what to verify in their mechanical histories, and how to judge Japanese asking prices against the cost of importing and registering a GTO in Ireland.

The evolution of the Mitsubishi GTO

Why Mitsubishi gradually removed some of the advanced technology that defined the original GTO


When Mitsubishi introduced the GTO in October 1990, its approach to performance relied on far more than engine output. The 2,972 cc 6G72 V6 was available in naturally aspirated 225 PS and twin-turbocharged 280 PS forms, both driving all four wheels. The Twin Turbo combined a Getrag five-speed manual gearbox with four-wheel steering, electronically controlled suspension, active aerodynamics and an exhaust system that could alter its sound. Mitsubishi was using electronic and mechanical systems to manage the weight, traction and high-speed behaviour of a substantial grand touring coupe.

The original four-wheel-drive system used a viscous-coupling centre differential with a nominal 45:55 front-to-rear torque distribution. Four-wheel steering allowed the rear wheels to turn in the same direction as the fronts at medium and higher speeds, improving stability during lane changes and sweeping bends. Active Aero adjusted the front underbody airflow and rear spoiler automatically, while Electronic Control Suspension (ECS) altered damping characteristics. These systems made the Twin Turbo technically unusual, but also added weight and mechanical complexity.

Mitsubishi began refining the original specification during 1992. Larger brakes, revised transmission operation and improvements to the engine and interior equipment addressed practical weaknesses without fundamentally changing the car. The Special Version specifications introduced a more luxurious direction, combining leather upholstery and glass-roof equipment with the existing drivetrain choices.

A much larger revision arrived in August 1993. Mitsubishi replaced the original retractable headlights with fixed projector units, redesigned the bumpers and introduced a Getrag six-speed manual gearbox for the Twin Turbo. Engine revisions increased torque while retaining the official 280 PS output. The additional gear ratio and improved braking equipment helped the car make more effective use of its substantial turbocharged performance.


In August 1994, Mitsubishi introduced the Twin Turbo MR, taking a noticeably different approach. Rather than adding more technology, the MR removed equipment including four-wheel steering, active aerodynamic functions and certain comfort features. Dedicated suspension tuning and BBS wheels accompanied an approximately 60 kg reduction in weight. The MR demonstrated that Mitsubishi could improve the GTO's sporting character by simplifying its original specification.

The naturally aspirated range changed in August 1995 when the SR replaced the previous base designation. Its 225 PS V6 remained available with five-speed manual or four-speed automatic transmission, but revised equipment and pricing gave it a clearer position below the turbocharged models.

Further changes arrived in August 1996. Mitsubishi revised the front bumper, adopted a different rear spoiler design and discontinued the original moving Active Aero equipment. Twin Turbo models also gained larger 18-inch wheels. The following year's safety updates brought standard ABS and broader passenger-airbag provision.

The final major Japanese revision came in August 1998. Larger front air intakes, integrated front lighting and a prominent rear wing gave the later GTO a more aggressive appearance. The range had settled into three principal specifications: SR, Twin Turbo MR and Twin Turbo.

By the late 1990s, a GTO buyer could choose between quite different factory specifications. The Twin Turbo retained the six-speed manual and twin-turbocharged V6, while the MR offered much of the same performance without some of the original car's electronic equipment. The naturally aspirated SR provided a less complicated alternative. Those differences still matter when assessing a Japanese car today, particularly if previous owners have changed the suspension, steering or drivetrain.

Mitsubishi GTO Z10 series

Mitsubishi GTO Z10 series (October 1990–August 2000)


The Japanese Mitsubishi GTO arrived in October 1990 with two versions of the 2,972 cc 6G72 V6. The naturally aspirated engine produced 225 PS, while the intercooled Twin Turbo developed 280 PS. Both used permanent four-wheel drive, but the turbocharged model introduced a much more elaborate collection of performance systems, including four-wheel steering, electronically controlled suspension and active aerodynamics. These were not simply optional extras. They were central to Mitsubishi's approach to controlling a wide, relatively heavy performance coupe.

The original Twin Turbo combined its V6 with a five-speed Getrag manual gearbox. Its four-wheel-steering system improved stability at higher speeds, while electronically adjustable dampers and movable aerodynamic components responded to driving conditions. The naturally aspirated GTO offered the same basic body and four-wheel-drive layout with a five-speed manual or four-speed automatic, but without the turbo engine's complete performance equipment package.

Mitsubishi revised the range repeatedly. The Special Version models introduced in June 1992 added leather upholstery, glass-roof equipment and additional interior appointments. August 1993 brought fixed projector headlights, improved brakes and a six-speed Getrag gearbox for the Twin Turbo. The following year, the Twin Turbo MR removed several electronic systems and comfort features, replacing them with dedicated suspension tuning and a lighter overall specification.

The naturally aspirated range was reorganised in August 1995 with the introduction of the SR. Further changes in 1996 altered the suspension and exterior equipment, including the discontinuation of the earlier moving Active Aero system. The final major styling revision arrived in August 1998, introducing a larger rear wing and redesigned front-end details.

The GTO remained a single Japanese generation, but the differences between an early five-speed Twin Turbo, a six-speed MR and a late SR extend well beyond their appearance. The original drivetrain, steering equipment and production period are essential to understanding what each car offers.


Current Japanese Retail Price: Around ¥800,000–¥5,000,000+ (approximately €4,500–€28,300+ / $5,050–$31,550+). This is an indicative Japanese retail asking-price range only, based on advertised vehicles, not the final cost of importing one. Lower-priced GTOs often have high mileage, modifications or mechanical work outstanding. Naturally aspirated automatic examples tend to be more accessible, while original Twin Turbo manuals, later six-speed cars and genuine MR specifications can command stronger prices. The condition of the turbochargers, gearbox, electronic equipment and four-wheel-drive system has a substantial influence on value. Exceptionally preserved examples may exceed the stated range, particularly when supported by comprehensive service records and original factory equipment.

Import cost considerations: A Japanese retail asking price is only the starting point for an Irish import calculation. Shipping, marine insurance, customs clearance, applicable import duty, VAT, port charges and Irish VRT all need to be considered before comparing a Japanese GTO with an Irish-registered example. GTOs over 30 years old at registration may qualify for the €200 vintage VRT rate, while younger examples are assessed under the applicable rules. Confirm the production date, chassis code, engine and original grade before estimating the complete landed cost. Mechanical work and specialist parts should be budgeted separately.

Engine output: The naturally aspirated 6G72 produced 225 PS at 6,000 rpm and 28.0 kg-m (approximately 275 Nm) at 4,500 rpm. Early Twin Turbo models developed 280 PS at 6,000 rpm and 42.5 kg-m (approximately 417 Nm) at 2,500 rpm. Following the August 1993 revision, Twin Turbo output remained 280 PS, while maximum torque increased to 43.5 kg-m (approximately 427 Nm) at 2,500 rpm. The Twin Turbo MR retained the later 280 PS and 43.5 kg-m (approximately 427 Nm) specification.

Engine: All Japanese GTO models used Mitsubishi's transversely mounted 2,972 cc 6G72 V6 petrol engine with DOHC, 24 valves and electronic fuel injection. The naturally aspirated version used a 10.0:1 compression ratio and produced 225 PS. Twin Turbo models employed two turbochargers with separate intercoolers and an 8.0:1 compression ratio, producing 280 PS. The engine's compact transverse installation was unusual for a Japanese performance coupe of this size. Turbocharger condition, cooling-system maintenance, timing-belt history and evidence of previous engine modifications are particularly relevant when inspecting surviving examples.

Best for: Drivers who want a powerful, substantial Japanese grand touring coupe with permanent four-wheel drive. The naturally aspirated versions suit those seeking a less complicated drivetrain, while Twin Turbo and MR models appeal to enthusiasts interested in Mitsubishi's turbocharged performance engineering. 

Body style: Three-door, four-seat sports coupe with a large rear hatch and a 2,470 mm wheelbase. The GTO measures 1,840 mm wide, with overall length varying from approximately 4,555 mm to 4,600 mm depending on production period and exterior specification. The broad body accommodates the transverse V6 and permanent four-wheel-drive system, while the rear seats provide limited occasional passenger accommodation. Its substantial kerb weight, generally around 1,600–1,730 kg depending on specification, distinguishes it from smaller Japanese sports cars of the period.

Drive: Permanent four-wheel drive throughout the Japanese range, using a centre differential with viscous-coupling limited-slip control. The system was designed around a nominal 45:55 front-to-rear torque distribution. The original Twin Turbo also featured four-wheel steering, which turned the rear wheels in the same direction as the fronts at medium and higher speeds to improve stability. The Twin Turbo MR removed four-wheel steering as part of its simplified specification. Rear limited-slip differential equipment and electronically controlled chassis systems varied by grade and production period, making factory identification essential.

Transmission: Early naturally aspirated GTO models offered a five-speed manual or four-speed automatic transmission. The original Twin Turbo used a five-speed Getrag manual gearbox until August 1993, when Mitsubishi introduced a six-speed Getrag transmission. The Twin Turbo MR was available exclusively with the six-speed manual, while the later SR retained five-speed manual and four-speed automatic choices. No factory automatic Twin Turbo was offered in Japan. Gearbox condition, clutch operation and the availability of replacement transmission components should be checked carefully, particularly on modified or higher-mileage examples.

Notable features: The Japanese GTO combined a transverse V6, permanent four-wheel drive and sophisticated chassis systems in a large sports coupe. Early Twin Turbo cars featured four-wheel steering, Electronic Control Suspension, Active Aero and an electronically controlled exhaust system. Major developments included the 1993 six-speed gearbox, the lighter Twin Turbo MR, the naturally aspirated SR and the final 1998 body revision. The GTO's factory equipment varies considerably across its production life.


Why the Z15A and Z16A chassis codes can be misleading

The Mitsubishi GTO's chassis codes reveal an important distinction that is easy to miss when comparing Japanese advertisements.

Early GTO models, including the naturally aspirated base grade and Twin Turbo, used the Z16A designation. This means an early Z16A is not automatically a turbocharged car, despite the code's strong association with the better-equipped Twin Turbo.

The situation became more complicated when Mitsubishi introduced the Twin Turbo MR in August 1994.

The MR received the Z15A designation because its specification differed from the regular Twin Turbo. It retained the 280 PS 6G72 twin-turbocharged engine, six-speed manual gearbox and permanent four-wheel drive, but omitted four-wheel steering and several other electronically controlled systems.

Later naturally aspirated SR models also used Z15A, particularly after the 1996 revisions.

Consequently, Z15A can identify either a 225 PS naturally aspirated GTO or a 280 PS Twin Turbo MR. The engine and original factory grade must be established separately.

This has practical consequences when examining cars modified during previous ownership. An MR may have received aftermarket suspension, different wheels or replacement body panels, while an SR could have acquired Twin Turbo-style exterior equipment.

The chassis code is therefore a starting point, not complete proof of specification.

For a Japanese import, confirm the factory model details, engine, transmission and original equipment using the chassis identification and available manufacturer records. That provides a much stronger basis for evaluating the car than its rear badge, advertised grade or exterior appearance alone.


Japanese Mitsubishi GTO Z10 series grades

The Japanese GTO range was originally divided between the naturally aspirated 225 PS model and the 280 PS Twin Turbo. Both used the same basic coupe body and permanent four-wheel-drive architecture, but the Twin Turbo received more advanced performance equipment, including four-wheel steering and electronically controlled chassis systems.

In June 1992, Mitsubishi introduced Special Version specifications for both engines. These were comfort-oriented factory special editions, distinguished by leather upholstery, glass-roof equipment and additional interior features rather than increased engine output.

The Twin Turbo MR arrived in August 1994 as a lighter, less equipment-heavy alternative to the regular Twin Turbo. It retained the 280 PS twin-turbocharged engine and six-speed manual gearbox but dispensed with four-wheel steering and several electronic or comfort features.

SR followed in August 1995 as the revised naturally aspirated specification.

These names identify different factory grades and special editions, not simply optional appearance packages. Their equipment also changed during production, particularly after the 1993 gearbox revision and subsequent updates.

Special Version

The Mitsubishi GTO Special Version was introduced in June 1992 as a more luxurious specification of the naturally aspirated model. It retained the 2,972 cc 6G72 DOHC V6 producing 225 PS and 28.0 kg-m (approximately 275 Nm), with permanent four-wheel drive and a four-speed automatic transmission. Mitsubishi added leather upholstery, a glass-top roof, CD audio and additional interior equipment. Power-adjustable front seating, cruise control and automatic climate control complemented the more expensive factory specification.

The Special Version was not a higher-performance derivative of the standard GTO. Its distinction lay in combining the naturally aspirated drivetrain with equipment normally associated with an expensive grand tourer. The glass-roof construction and leather interior are particularly relevant when inspecting surviving cars, as water ingress, damaged seals and interior deterioration can affect restoration costs. Buyers should verify the original factory specification rather than assuming that any early GTO fitted with leather seats or a glass roof is a genuine Special Version.


Twin Turbo

The GTO Twin Turbo was the original performance flagship, introduced in October 1990 with a 2,972 cc 6G72 V6 producing 280 PS. Its two intercooled turbochargers delivered 42.5 kg-m (approximately 417 Nm) in the earliest specification, while permanent four-wheel drive, four-wheel steering, electronically controlled suspension and active aerodynamics formed a comprehensive performance package. The original five-speed Getrag manual was replaced by a six-speed in August 1993, when maximum torque increased to 43.5 kg-m (approximately 427 Nm). Later production changes revised braking equipment, wheels, bodywork and electronic systems.

The Twin Turbo's equipment makes original specification particularly important. Early cars with functioning Active Aero, four-wheel steering and ECS are mechanically different from later examples that no longer carried the same combination of systems. A six-speed car also offers a different drivetrain specification from the original five-speed version. When inspecting Japanese listings, check whether active systems have been removed, disabled or replaced during previous modifications. A standard-looking Twin Turbo may still have aftermarket boost control, upgraded turbochargers or deleted factory systems that are not obvious in listing photographs.


Twin Turbo Special Version

Introduced in June 1992, the Twin Turbo Special Version combined Mitsubishi's original 280 PS turbocharged drivetrain with the additional luxury equipment offered in the Special Version range. It retained the 2,972 cc twin-turbocharged 6G72, 42.5 kg-m (approximately 417 Nm) output, five-speed Getrag manual gearbox and permanent four-wheel drive. Four-wheel steering, electronically controlled suspension and active aerodynamic equipment remained part of its mechanical identity. Factory additions included leather upholstery, glass-roof equipment, CD audio and other comfort appointments.

This specification represents a particular stage of early GTO production, before the August 1993 introduction of the six-speed gearbox and fixed-headlight bodywork. Its original combination of advanced electronic systems, luxury equipment and the five-speed Twin Turbo drivetrain is what distinguishes it from later models. Buyers should confirm the factory glass roof, leather trim, original transmission and functioning electronic equipment. An ordinary Twin Turbo retrofitted with leather upholstery does not automatically become a genuine Twin Turbo Special Version.


Twin Turbo MR

The Mitsubishi GTO Twin Turbo MR arrived in August 1994 as a more focused alternative to the standard Twin Turbo. It retained the 2,972 cc twin-turbocharged 6G72 producing 280 PS and 43.5 kg-m (approximately 427 Nm), paired exclusively with the six-speed Getrag manual transmission and permanent four-wheel drive. Mitsubishi removed the four-wheel-steering system and several other electronic and comfort features, while introducing dedicated sports suspension and BBS alloy wheels. The original MR weighed approximately 1,650 kg, around 60 kg less than the contemporary Twin Turbo.

MR stands apart because Mitsubishi deliberately simplified a car originally defined by its technological equipment. The reduced weight and conventional suspension specification changed its character without requiring more engine output. Later MR models received the wider GTO range's styling, braking and equipment revisions, so not every production year has an identical specification or kerb weight. The Z15A chassis designation is a useful identifying detail, but it must be checked alongside the original factory grade because naturally aspirated SR models also used Z15A. Genuine suspension components, wheels and previous modifications deserve particular attention.


SR

The GTO SR was introduced in August 1995 as the revised naturally aspirated specification, retaining the 2,972 cc 6G72 DOHC V6 producing 225 PS and 28.0 kg-m (approximately 275 Nm). It was available with either a five-speed manual or four-speed automatic transmission, together with permanent four-wheel drive. Mitsubishi simplified the equipment specification and lowered the entry price compared with earlier naturally aspirated models. The SR subsequently received the GTO's exterior revisions, including changes to bumpers, wheels, lighting and the final 1998 bodywork.

The SR offered a different ownership proposition from the Twin Turbo and MR. Without turbochargers, intercooled intake plumbing and the associated higher-output drivetrain, it avoided some of the additional mechanical systems found on the performance versions. However, it remained a substantial four-wheel-drive coupe with an ageing V6, transmission and suspension components that still require proper maintenance. Later SR models used the Z15A chassis designation, which they shared with the Twin Turbo MR. Buyers should therefore verify engine specification and factory grade rather than relying on the chassis code alone.


Base grade

The original Mitsubishi GTO base grade was introduced in October 1990 with a naturally aspirated 2,972 cc 6G72 DOHC V6 producing 225 PS and 274.6 Nm. Buyers could choose a five-speed manual or four-speed automatic transmission, both combined with permanent four-wheel drive. The standard car retained the wide coupe body, double-wishbone rear suspension and much of the GTO's grand touring equipment, but did not receive the full collection of electronically controlled performance systems associated with the Twin Turbo.

The base grade is an important part of Japanese GTO history because it established that the model was not exclusively a turbocharged performance car. It offered the same fundamental body and four-wheel-drive layout with a less complicated engine specification. Early examples used the Z16A chassis designation, which should not be mistaken for automatic proof of a Twin Turbo. Mitsubishi continued developing the naturally aspirated version through the early and middle production years before introducing SR in 1995. Transmission condition, cooling-system maintenance and original factory equipment remain important considerations.

Mitsubishi GTO FAQ

Why can the Z15A chassis code identify both a Twin Turbo MR and a naturally aspirated GTO?

Mitsubishi used the Z15A designation for more than one mechanical specification. The Twin Turbo MR introduced in August 1994 carried the Z15A code despite retaining the 280 PS twin-turbocharged 6G72 engine and six-speed Getrag manual gearbox. Later naturally aspirated SR models also used Z15A, but with a 225 PS engine and either five-speed manual or four-speed automatic transmission.

The Z16A designation can be equally misleading. Early naturally aspirated GTOs and the regular Twin Turbo both used it. Consequently, neither chassis prefix establishes engine output or factory grade on its own. The complete chassis number, production date, original grade and transmission must be checked together, particularly when an advertised car has modified bodywork or missing factory badges.

What changed mechanically when Mitsubishi introduced the six-speed Twin Turbo in August 1993?

The August 1993 revision brought more than fixed projector headlights. Mitsubishi replaced the Twin Turbo's original five-speed Getrag manual gearbox with a six-speed unit, while maximum engine torque increased from 42.5 kg-m (approximately 417 Nm) to 43.5 kg-m (approximately 427 Nm). Peak power remained at the Japanese factory rating of 280 PS.

The revised transmission provided an additional ratio to make better use of the turbocharged V6's torque delivery. Mitsubishi also introduced wider tyres, revised braking equipment and other chassis improvements during this development period. For someone comparing Japanese cars, the original five-speed Twin Turbo and later six-speed version represent two different drivetrain specifications, even though their published peak power figures are identical.

How did the GTO's four-wheel-steering system work, and what was it designed to achieve?

Mitsubishi developed the GTO's four-wheel steering as part of its All Wheel Control approach. At medium and higher road speeds, the system turned the rear wheels in the same direction as the front wheels, helping improve stability during lane changes and fast sweeping corners. It complemented the permanent four-wheel-drive system rather than replacing any part of it.

The arrangement added mechanical and hydraulic components that require inspection on older cars. Rear steering linkages, hydraulic lines, seals and associated components should be examined for leakage, corrosion and previous modifications. The original Twin Turbo used four-wheel steering, while the Twin Turbo MR deliberately omitted it. Establishing whether a particular GTO was equipped with 4WS from the factory is therefore essential before treating missing rear-steering components as a fault.

What did Mitsubishi's Active Aero system actually do at 80 km/h?

The original Twin Turbo used an Active Aero system that operated two separate aerodynamic components. At approximately 80 km/h and above, a movable front venturi cover beneath the bumper and an adjustable rear spoiler changed position automatically. The purpose was to manage airflow and improve high-speed stability without permanently fitting large fixed aerodynamic components.

The system formed part of the original GTO's unusually advanced equipment, but it also introduced motors, linkages, switches and electrical connections that can deteriorate with age. Mitsubishi discontinued the moving Active Aero arrangement during the August 1996 revision, replacing it with revised fixed bodywork. Buyers examining an early Twin Turbo should establish whether the complete system remains fitted and operational, rather than assuming that a stationary rear spoiler represents the original specification.

Why did Mitsubishi remove so much equipment from the Twin Turbo MR?

The Twin Turbo MR, introduced in August 1994, was developed to offer a more direct driving experience than the extensively equipped regular Twin Turbo. Mitsubishi retained the 280 PS engine, six-speed manual gearbox and permanent four-wheel drive but removed four-wheel steering, Active Aero, Active Exhaust and several convenience features. Dedicated sports suspension, BBS wheels and brake-cooling guides formed part of the original specification.

This reduced weight and mechanical complexity without sacrificing the turbocharged drivetrain. The MR consequently represents a different engineering approach from the regular Twin Turbo, rather than simply a cheaper specification. The distinction is particularly important when evaluating modified examples. An ordinary Twin Turbo with its electronic systems removed is not automatically equivalent to a factory MR, which also received its own suspension and equipment configuration.

What made the 1992 GTO Special Version and Twin Turbo Special Version different?

Mitsubishi introduced both Special Version specifications in June 1992. The naturally aspirated Special Version used the 225 PS 6G72 engine and was available with either a five-speed manual or four-speed automatic transmission. The Twin Turbo Special Version retained the 280 PS intercooled engine and five-speed manual gearbox. Both received additional equipment associated with the more luxurious side of the GTO range.

Factory appointments included leather upholstery, a glass roof, CD audio and additional comfort features. The important distinction is that Special Version did not identify one common drivetrain. The two cars shared an equipment theme but had different engines and transmissions. When reviewing Japanese examples, the original glass-roof construction, interior materials and factory grade should be checked, particularly where replacement seats, aftermarket audio or body repairs have altered the surviving specification.

What is the difference between the GTO's ECS suspension and the conventional suspension fitted to the MR?

Electronic Control Suspension (ECS) allowed the GTO to adjust damper characteristics electronically, responding to driving conditions and the selected suspension setting. The system was intended to provide a balance between ride comfort and body control in a relatively heavy four-wheel-drive coupe. It formed part of the more technologically equipped GTO specifications.

The Twin Turbo MR used dedicated sports suspension rather than the regular Twin Turbo's electronically controlled arrangement. This removed some of the associated electronic hardware and allowed Mitsubishi to concentrate on a fixed suspension calibration. On an ECS-equipped car, the control switches, dashboard indicators, damper actuators and wiring should be examined. An aftermarket suspension conversion may function perfectly well, but it changes the car's original mechanical specification and should be assessed accordingly.

Which official Mitsubishi service campaign should be checked on Japanese Twin Turbo manuals?

Mitsubishi issued Japanese service campaign SC059 in 2002 concerning the transfer case fitted to turbocharged manual GTOs. The campaign addressed the possibility of an incorrectly fitted or damaged O-ring allowing oil seepage where the transfer case transmits drive towards the rear axle. Mitsubishi instructed dealers to inspect the oil level and leakage, replacing the O-ring and applying additional sealing material where necessary.

The campaign covered specified Z15A and Z16A chassis-number ranges, although Mitsubishi notes that not every vehicle within those broad ranges was necessarily affected. A buyer should establish eligibility using the full chassis number and request evidence of any completed inspection or repair. Regardless of campaign status, the transfer case should be checked for oil leakage, correct lubrication and abnormal drivetrain noises before purchasing an ageing Twin Turbo.

Why did Mitsubishi replace the GTO's electronic aerodynamic equipment with fixed spoilers?

The original GTO was developed at a time when Mitsubishi was using several active systems together to manage high-speed behaviour. Its movable front venturi cover and rear spoiler were part of that approach. As production continued, Mitsubishi revised the bodywork and discontinued Active Aero in August 1996, adopting fixed aerodynamic components instead.

The final August 1998 revision introduced a substantially larger rear wing on the Twin Turbo, along with redesigned front bodywork intended to improve cooling and aerodynamic performance. These changes gave the later GTO a different appearance and reduced its dependence on moving aerodynamic hardware. When examining Japanese listings, the 1996 and 1998 revisions should be distinguished, since both feature fixed aerodynamic equipment but use different factory body designs.

How did the naturally aspirated GTO's four-wheel-drive system differ from the Twin Turbo's specification?

The Japanese naturally aspirated GTO retained Mitsubishi's permanent four-wheel-drive architecture rather than adopting a simpler two-wheel-drive arrangement. Its 225 PS 6G72 engine was paired with either a five-speed manual or four-speed automatic transmission, while the Twin Turbo used a Getrag manual gearbox to handle considerably greater torque.

The distinction extended beyond the engine. The original Twin Turbo combined its drivetrain with more advanced suspension, aerodynamic and steering equipment. Naturally aspirated specifications changed during production, particularly when SR replaced the original base grade in August 1995 and several convenience and chassis features were removed. Buyers should therefore assess engine, transmission, differential equipment and production period together, rather than assuming that every naturally aspirated GTO has identical mechanical equipment.

Which mechanical records deserve the closest attention when assessing a Japanese GTO Twin Turbo?

The 6G72 is a timing-belt-driven V6, making evidence of belt replacement and associated servicing particularly important. The twin-turbocharged version also requires examination of its intercooler plumbing, cooling system, turbochargers and previous boost-control modifications. Oil leaks, ageing hoses and undocumented engine tuning can significantly increase the work required after purchase.

The six-speed Getrag gearbox, clutch, transfer case, differentials and driveshafts should also be assessed, especially on cars with substantial power modifications. The GTO's weight places considerable demands on brakes, tyres and suspension components. For an early Twin Turbo, functioning four-wheel steering, ECS and Active Aero equipment may add to the car's originality, but these systems should be inspected individually. A detailed mechanical report offers far more useful evidence than an auction grade or low odometer reading alone.

Before you import 


Before buying a Mitsubishi GTO in Japan, verify its chassis number, production date and factory grade. Z15A does not always mean Twin Turbo MR, and early Z16A cars could be naturally aspirated.

Check the turbochargers, gearbox, clutch, transfer case, timing-belt history and cooling system. On early Twin Turbos, inspect the four-wheel steering, ECS, Active Aero and Active Exhaust systems where fitted. Confirm whether Mitsubishi's SC059 service campaign applies, and inspect the underbody for corrosion or accident damage.

Finally, calculate shipping, customs charges, VAT and Irish VRT, including eligibility for the €200 vintage rate. Allow for potential repairs before deciding whether the Japanese asking price represents good value.


Your Mitsubishi GTO search starts in Japan


Finding a GTO is one thing. Finding the right Twin Turbo, MR or SR, with the specification, condition and history to justify its asking price, is another.

Tell us what you're looking for and your budget. We'll research available Japanese-market examples and help you compare your options, including estimated import costs, before you make a decision.

Explore Japanese GTO availability. Free, independent advice.

Explore Other Popular Imports


Toyota Chaser JZX100

Mitsubishi Lancer Evolution


Toyota Mazda RX-8

Mitsubishi Pajero

Newest JDM Import Guides

Be the first to read what's new!


Japanese auction sheet damage codes are shorthand used by auction inspectors to record visible defects and previous work across a vehicle. Depending on the auction house, markings such as A can indicate scratches, U dents, W signs of paintwork or repair, S rust, C corrosion, while X and XX can identify panels requiring replacement or already...

Choosing the right car isn't just about finding the right make, model or budget. When importing from Japan, the exact specification can dramatically influence what you'll pay by the time the vehicle reaches Ireland. Two cars that appear almost identical may have completely different VRT calculations, running costs and long-term value, because of...

Choosing the best Japanese wheelchair accessible vehicle isn't about buying the most expensive model or the one with the biggest badge. It's about finding the WAV that best suits your mobility requirements, family, passengers and everyday lifestyle. For some buyers, that may be a compact family WAV such as the Toyota Sienta, Honda Freed, Toyota...

The Toyota Chaser JZX100 has quietly become one of Japan's most sought-after performance saloons. Once considered an affordable alternative to the Nissan Skyline, today's best examples are increasingly difficult to find, with clean, original cars attracting strong demand from enthusiasts across Europe, Australia and the United States. As...