Mazda Roadster Import Ireland: Buyer's Guide 


Four Japanese generations, from the original Eunos NA to the modern ND and retractable-fastback RF.

Compare Japanese Roadster generations, engines, roof options, special editions and available cars. Explore suitable examples, their condition and estimated Irish import costs before deciding what to buy.

Mazda introduced the Eunos Roadster (NA6CE) in Japan in September 1989 with a 1.6-litre DOHC petrol engine, rear-wheel drive and pop-up headlights. The 1.8-litre NA8C followed in 1993, before the second-generation Mazda Roadster (NB) arrived in January 1998. Japanese NB6C and NB8C models offered 1.6-litre and 1.8-litre engines, with a six-speed manual gearbox available on selected 1.8-litre grades. Mazda later introduced the limited-production MazdaSpeed Roadster in 2001 and a factory-turbocharged NB model in 2004. For Irish buyers researching a Mazda Roadster import from Japan, checking the chassis code, engine and original factory specification helps distinguish cars that may otherwise look very similar.


The third-generation NC arrived in August 2005 with a 2.0-litre MZR petrol engine, while RS and VS grades offered different gearbox and equipment combinations. Mazda added the Power Retractable Hard Top (RHT) in August 2006, followed by the lighter ND series in May 2015 with a 1.5-litre SKYACTIV-G engine. The 2.0-litre Roadster RF joined the Japanese range in December 2016, offering an electrically retractable fastback roof. Later ND developments included the lightweight 990S, revised steering and an asymmetric limited-slip differential on eligible manual grades, and the Mazda Spirit Racing Roadster and 12R with 2.0-litre engines. An NC RS, an ND 990S and a Roadster RF offer different combinations of engine, transmission, roof design and factory equipment, all relevant when comparing Japanese Mazda MX-5 listings and estimating Irish import costs.


This guide focuses specifically on the Mazda Roadster models sold in Japan, covering all four generations, their engines, chassis codes, factory grades, special editions, transmission and roof options, mechanical differences and the practical costs of importing one into Ireland.

The evolution of the Mazda Roadster


From the original Eunos Roadster to the modern ND, Mazda has spent more than 35 years refining its lightweight, rear-wheel-drive sports car.

Mazda developed the original Roadster around a straightforward idea: a compact, lightweight two-seat sports car with rear-wheel drive and a manually operated fabric roof. Although front-wheel-drive and mid-engine layouts were considered during development, Mazda chose a front-engine, rear-wheel-drive arrangement with independent double-wishbone suspension. Small British and European roadsters had been popular during the 1960s, but increasing safety requirements, emissions regulations and production costs gradually pushed them out of the market. These decisions established the Jinba Ittai philosophy, meaning horse and rider as one, which has guided Roadster development ever since.

The first-generation Eunos Roadster (NA) reached Japanese dealerships in September 1989, initially priced at ¥1.7 million. Its aluminium bonnet helped reduce weight over the front axle, while the 1.6-litre engine provided enough performance without demanding excessively wide tyres or heavy-duty components. Mazda enlarged the engine to 1.8 litres in 1993 and gradually expanded the Japanese range with V Special, S Special and other limited editions. The rarer M2 models went further, with distinctive equipment and modifications developed through Mazda's M2 subsidiary. By the time NA production ended, the Roadster had helped establish an international market for affordable, lightweight two-seat sports cars.

The NB generation arrived in January 1998, replacing the pop-up headlights with fixed units and introducing a stronger body structure, improved crash protection and additional refinement. Mazda retained the 1.6-litre and 1.8-litre engines for Japan, but the mechanical development continued well beyond the initial launch. A substantial revision in July 2000 introduced variable intake valve timing on the 1.8-litre engine, raising output to 160 PS. The RS and RS-II received additional chassis reinforcement and Bilstein dampers. Japan also received the competition-oriented NR-A, the rare fixed-roof Roadster Coupe in 2003 and a factory-turbocharged Roadster in February 2004. 

The Roadster Turbo was announced on 24 December 2003 and went on sale in Japan in February 2004. Its intercooled 1.8-litre engine produced 172 PS and 209 Nm, with sales limited to 350 cars.

The third-generation NC Roadster, introduced in August 2005, represented a larger mechanical change. Mazda fitted a 2.0-litre MZR engine, retained double-wishbone front suspension and replaced the earlier rear suspension layout with a multi-link arrangement. The NC also introduced a wider body and greater structural rigidity. In August 2006, Mazda added the Power Retractable Hard Top (RHT), whose electrically operated roof folded away without reducing the available boot space. Further revisions in December 2008 brought changes to the engine response, suspension tuning and exterior styling. The NC appealed to buyers wanting the traditional Roadster layout with more power, additional equipment and a choice between fabric and electrically operated roofs.

Mazda changed direction again with the ND series in May 2015, reducing the car's dimensions and bringing the lightest Japanese S manual grade down to 990 kg. The new 1.5-litre SKYACTIV-G engine was developed specifically for the smaller Roadster, while the six-speed manual transmission and drivetrain were designed with weight reduction in mind. The 2.0-litre Roadster RF followed in December 2016, introducing a retractable fastback roof. Later updates included the 990S with forged RAYS wheels and Brembo front brakes, Kinematic Posture Control in late 2021, and the substantial 2024 revision with improved steering, updated electronics and an asymmetric limited-slip differential on applicable grades.

Mazda opened Japanese reservations for the Mazda Spirit Racing Roadster and the limited-production 12R in October 2025, with sales scheduled to begin in January 2026. Both introduced a 2.0-litre engine to the Japanese ND soft-top range, with the 12R producing 200 PS. Mazda also introduced the PS special edition in 2026. When comparing Japanese Mazda Roadsters, start with the chassis code, production year and original factory grade. An early NA6CE, a facelifted NB8C RS, an NC retractable hardtop and a later ND have different engines, transmissions, suspension specifications and equipment. These details also help establish whether an advertised car retains its original Japanese specification.

Mazda Roadster NA series

Mazda Roadster NA series (September 1989 – January 1998)


The first-generation Roadster went on sale in Japan in September 1989 under Mazda's Eunos brand. The original NA6CE used a 1,597 cc B6-ZE twin-cam petrol engine producing 120 PS with the five-speed manual gearbox. The engine sat behind the front axle line, driving the rear wheels through a conventional manual transmission and differential. Double-wishbone suspension at all four corners, a 2,265 mm wheelbase and a kerb weight starting at 940 kg gave the car its distinctive handling. The body also featured an aluminium bonnet, pop-up headlights and a manually folding fabric roof.

The original Japanese range was relatively simple, with a basic model and the better-equipped Special Package. Mazda added a four-speed automatic in February 1990, using a lower-output 110 PS version of the 1.6-litre engine. The V Special followed in August, introducing British Racing Green paint, tan leather upholstery and wood-trimmed interior fittings. Mazda expanded the sporting side of the range in September 1992 with the S Special, which received Bilstein dampers, BBS alloy wheels and additional chassis equipment.

September 1993 brought the NA8C, replacing the 1.6-litre engine with a 1,839 cc BP-ZE producing 130 PS and 157 Nm. Mazda revised the body structure, brakes and drivetrain to accommodate the larger engine, while selected manual models received a Torsen limited-slip differential in place of the earlier viscous arrangement. The S Special developed into Type I and Type II specifications, while the V Special Type II provided a more extensively equipped version of the leather-trimmed Roadster.

The August 1995 revision introduced further mechanical changes, including a lighter flywheel and revised final-drive gearing on applicable manual models. Mazda also reorganised the range around the normal base car, M Package, Special Package, V Special and S Special Type I and II. This period produced some of the more recognisable Japanese limited editions, including the VR Limited combinations, R2 Limited and B2 Limited.

Throughout production, Mazda offered numerous Japanese-market special editions with different mechanical equipment, colours and interiors. The J Limited and J Limited II were finished in Sunburst Yellow, while the RS Limited received Recaro bucket seats and dedicated suspension equipment. Mazda's M2 subsidiary also developed three specialist Roadsters: the 1.6-litre M2 1001 and M2 1002, followed by the lightweight 1.8-litre M2 1028. These were complete specialist vehicles, not ordinary trim packages.

The NA's mechanical layout is relatively simple, but corrosion and previous repairs can make two apparently similar Japanese examples very different purchases. Check the sills, rear wheel arches, floors and structural sections, along with the cooling system, roof and evidence of accident damage. Limited-edition identification is another consideration, particularly where original wheels, seats, interior trim or factory colours have been replaced. An early NA6CE V Special, a later NA8C S Special Type II and an M2 1028 have substantially different specifications despite sharing the same basic body.


Current Japanese retail price: Around ¥800,000–¥5.6 million+ (approximately €4,600–€32,000+ / $5,000–$35,100+). Japanese retail listings cover modified or high-mileage examples below ¥1 million, ordinary NA6CE and NA8C cars around ¥1.5 million–¥3 million, and substantially more expensive original or restored examples. Limited editions, low-mileage cars and rare M2 models can exceed the upper end of this range. Current Japanese listings include examples priced around ¥1.4 million–¥2.7 million, while broader advertised stock extends considerably higher. Rust repairs, accident history, originality, service records and the condition of the fabric roof have a major influence on asking prices. These figures represent Japanese retail advertising, not auction prices or the cost of importing a vehicle into Ireland.

Import cost considerations: Japanese retail prices exclude inland transport, export documentation, shipping, marine insurance, customs clearance, import duty, Irish VAT and VRT. Under current Irish rules, a vehicle proven to be more than 30 years old at the time of Irish registration falls into VRT Category C, with a fixed charge of €200. Buyers should establish the vehicle's qualifying age from acceptable documentation before relying on this rate. Most early NA6CE cars already meet that age requirement, while later NA8C examples must be checked against their actual age at Irish registration. The €200 VRT rate does not remove customs duty or VAT on imports from Japan. A cheap Roadster requiring substantial rust repairs can be a considerably more expensive purchase than a better-preserved Japanese example with a higher asking price.

Engine output:

  • B6-ZE 1.6-litre DOHC petrol, five-speed manual: 120 PS at 6,500 rpm / 137 Nm at 5,500 rpm
  • B6-ZE 1.6-litre DOHC petrol, four-speed automatic: 110 PS at 6,000 rpm / 137 Nm at 4,500 rpm
  • BP-ZE 1.8-litre DOHC petrol: 130 PS at 6,500 rpm / 157 Nm at 4,500 rpm
  • M2 1001 modified 1.6-litre B6-ZE: 130 PS at 6,500 rpm
  • M2 1028 modified 1.8-litre BP-ZE: approximately 140 PS

Engine: Japanese NA6CE models use Mazda's 1,597 cc B6-ZE four-cylinder petrol engine with a cast-iron block, aluminium cylinder head, twin overhead camshafts, 16 valves and electronic fuel injection. The NA8C introduced the 1,839 cc BP-ZE, retaining the naturally aspirated four-cylinder layout while increasing displacement and torque. Both engines use timing belts and conventional cooling systems. The larger engine has greater torque at lower engine speeds, although the weight and equipment of individual cars also affect how they drive. Original M2 1001 and M2 1028 engines received specialist modifications, including changes to internal components and engine calibration. These should not be confused with ordinary B6-ZE or BP-ZE engines fitted with aftermarket intake or exhaust components.

Best for: The NA6CE suits drivers interested in the earliest specification and lower kerb weight, while the NA8C offers more torque and revised chassis equipment. V Special models provide leather upholstery and traditional interior finishes, S Special versions concentrate on suspension and handling, and the limited editions offer distinctive factory specifications. Original M2 models are more appropriate for collectors and enthusiasts familiar with their substantial restoration costs.

Body style: Two-door, two-seat open-top sports car with a manually folding fabric roof, separate boot and pop-up headlights. Early NA6CE models measure approximately 3,970 mm long, 1,675 mm wide and 1,235 mm high, with a 2,265 mm wheelbase. The NA8C retained the same basic dimensions, although overall length changed slightly on later specifications. The aluminium bonnet, short rear deck and compact cabin remained throughout production. Removable hardtops were also available, but their presence on a used car does not establish its original grade. The fabric roof, rear window, drainage channels and door seals should be inspected for leaks and deterioration.

Drive: Front-engine, rear-wheel drive throughout the Japanese NA range. Mazda used independent double-wishbone suspension at both ends, front ventilated disc brakes, rear solid discs and rack-and-pinion steering. Limited-slip differential equipment varied by model, transmission and production period. Earlier cars used viscous limited-slip arrangements on applicable specifications, while selected NA8C manual models received Torsen differentials. S Special models used firmer Bilstein dampers, while limited editions such as the RS Limited and M2 cars received additional chassis equipment. The condition of suspension bushes, wheel alignment, steering components and differential mounts is particularly relevant on older or heavily modified examples.

Transmission: Five-speed manual transmission from the September 1989 introduction, followed by a four-speed automatic in February 1990. The manual remained the standard choice for the sporting grades and specialist editions, while the automatic was available on selected standard, Special Package, V Special and limited-edition models. No Japanese first-generation Eunos Roadster was equipped with a factory six-speed manual gearbox. The clutch, gearbox synchronisers, gear-lever boots, differential and transmission mounting components should be inspected, particularly where the car has been used for circuit driving or converted from automatic to manual.

Notable features: Pop-up headlights, aluminium bonnet, front-engine rear-wheel-drive layout, four-wheel double-wishbone suspension, 1.6-litre B6-ZE and 1.8-litre BP-ZE engines, five-speed manual transmission, optional four-speed automatic, limited-slip differentials, Bilstein suspension on sporting grades, BBS wheels, Nardi wood interior equipment, tan leather V Special upholstery, numerous Japanese limited editions and the specialist M2 1001, 1002 and 1028 models.


What the Japanese chassis codes tell you about a Roadster

Two chassis designations cover the Japanese first-generation Eunos Roadster. NA6CE identifies the original 1.6-litre model, introduced in September 1989. These cars use the B6-ZE engine and were sold with a five-speed manual gearbox, followed by an optional four-speed automatic from February 1990. Factory equipment ranged from relatively simple base cars to leather-trimmed V Special models and the sporting S Special.

NA8C appeared in September 1993 with the 1.8-litre BP-ZE engine. The change involved more than an increase in displacement. Mazda revised the body and drivetrain, increased brake capacity and introduced different limited-slip differential equipment on selected specifications. The NA8C continued with a five-speed manual or four-speed automatic, depending on grade.

The 1.8-litre range is also commonly divided into early and later versions. The August 1995 update introduced changes to engine and drivetrain components, including a lighter flywheel and revised gearing on applicable models. 

These later NA8C cars are often described in Japanese enthusiast circles as Series 2, although the underlying chassis designation remained NA8C. 

The chassis code does not identify the factory grade. An NA6CE could be a standard model, V Special, S Special or one of several limited editions. Likewise, NA8C covers everything from the basic 1.8-litre Roadster to the RS Limited, VR Limited and later SR Limited.

M2 specialist cars also used the NA platform, but their original modifications and identification details require separate verification. A standard NA6CE or NA8C fitted with M2-style components should not be advertised as a genuine M2 production model without supporting evidence.

When examining Japanese auction sheets or retail listings, the chassis code should be considered alongside the production date, factory grade, transmission, original colour and available documentation. This is particularly important for limited editions, where a respray or replacement interior can make identification from photographs difficult.


Japanese Eunos Roadster NA series grades

The Japanese Eunos Roadster range began with a standard 1.6-litre model and a more comprehensively equipped Special Package. Mazda subsequently added the V Special with leather upholstery and wood interior trim, followed by the S Special with Bilstein suspension and BBS wheels. These became the principal equipment lines around which the NA range developed.

The introduction of the 1.8-litre NA8C in 1993 brought revised specifications, including the V Special Type II and S Special Type I. The August 1995 update added the S Special Type II and reorganised the equipment packages. Unlike the later Mazda Roadster generations, the NA did not have a large range of completely different factory engines or transmissions. Most of its variations concerned suspension, differential equipment, interior materials, wheels and limited-production colours.

Mazda also released numerous special editions for Japan. The J Limited and J Limited II used Sunburst Yellow paint, while the S Limited, RS Limited and R Limited featured specific sporting equipment. G Limited, VR Limited and B2 Limited concentrated on particular combinations of body colour, roof material and interior trim. Some, including the Tokyo Limited, were produced in very small numbers.

These distinctions matter because Japanese advertisements do not always identify the original specification correctly. A car listed as an S Special may have aftermarket suspension, while a V Special could have lost its original leather interior or matching fabric roof. Limited-production models require particular care because their factory equipment may be difficult to source separately.


Base Grade

The original 1989 Eunos Roadster was sold in Japan with the 1.6-litre B6-ZE engine, five-speed manual gearbox and rear-wheel drive. Its introductory price was ¥1,700,000. Early manual examples weighed approximately 940 kg, making them the lightest ordinary production NA models. Standard equipment was deliberately limited, with power steering, air conditioning, electric windows and alloy wheels dependent on options and production period.

The base grade remained available when Mazda introduced the 1.8-litre NA8C in 1993. These later cars gained the larger BP-ZE engine and the mechanical revisions introduced with the NA8C. A basic model can still have factory options, so the absence of V Special or S Special identification does not establish whether a car originally had a limited-slip differential, power steering or other equipment.


Special Package

Special Package was available from the early NA6CE period and added convenience equipment to the basic Roadster. Depending on production year, the package included features such as power steering, electric windows and additional interior equipment. The factory five-speed manual remained available, while later specifications could also be ordered with the four-speed automatic.

The Special Package continued into the 1.8-litre range, receiving the same basic NA8C engine and chassis revisions as the standard model. It did not include the complete suspension specification of the S Special or the leather interior of the V Special. Its equipment must therefore be checked against the relevant Japanese catalogue year, particularly on cars that have been modified or restored.


M Package

Mazda introduced the M Package as part of the revised 1.8-litre range in August 1995. It sat between the normal base model and the more comprehensively equipped Special Package, adding selected convenience equipment such as power windows. Five-speed manual and four-speed automatic versions were available.

The M Package also became the basis for later Japanese special editions, including the B2 Limited and SR Limited. This is relevant when comparing their factory specifications because neither was simply a standard S Special with a different interior. The M Package retained the regular 130 PS BP-ZE engine and conventional suspension arrangement unless additional equipment was specified.


V Special

The V Special joined the Japanese range in August 1990. Its original NA6CE specification combined British Racing Green paint with tan leather upholstery, a tan fabric roof and Nardi wood-trimmed steering wheel and gear lever. Chrome and polished interior details distinguished it from the standard Roadster. Mazda retained the same 1.6-litre engine, offering the V Special as a better-equipped touring specification rather than a separate performance model.

The V Special continued into the NA8C generation with the 130 PS 1.8-litre engine. Its equipment and exterior colours changed during production, so not every V Special should be assumed to have the exact appearance of the original green-and-tan model. On Japanese retail cars, the condition of the leather seats, wood fittings and original roof material is particularly relevant because these components are central to the grade's specification.


V Special Type II

The V Special Type II appeared with the revised NA8C range in September 1993. Mazda developed the original V Special specification with additional decorative equipment, including polished alloy wheels and chrome exterior details. Tan leather upholstery and the matching roof continued the traditional interior treatment, while the engine remained the naturally aspirated 1.8-litre BP-ZE producing 130 PS.

Type II was primarily an equipment variation, not an increase in engine performance. The polished wheels, exterior mirrors, roof colour and interior fittings help establish whether a car retains its original specification. Since these cars share much of their mechanical equipment with other NA8C models, originality and overall condition generally matter more than the Type II designation alone.


S Special

Mazda introduced the S Special in September 1992 as the sporting grade of the 1.6-litre NA6CE. It included Bilstein dampers, BBS alloy wheels and additional chassis-related equipment. A five-speed manual gearbox was standard, with the same 120 PS B6-ZE engine used in other Japanese manual NA6CE models.

The S Special established the mechanical basis for several later limited editions. Its suspension specification is the main distinction from an ordinary Special Package, although many surviving cars have had their dampers, springs and wheels replaced. An S Special on adjustable aftermarket suspension may no longer have the original ride and handling characteristics. The engine and transmission remain conventional NA6CE components.


S Special Type I

The S Special Type I designation appeared with the 1.8-litre NA8C in September 1993. It retained the sporting approach of the original S Special, combining the 130 PS BP-ZE engine with a five-speed manual gearbox, Bilstein dampers, additional chassis reinforcement and BBS alloy wheels. The larger engine provided more torque, while the NA8C revisions brought corresponding changes to the brakes and drivetrain.

Type I continued into the later NA8C production period. Mazda also used it as the mechanical basis for limited editions such as the VR Limited. The original suspension, wheels and differential equipment should be identified before purchasing, particularly where an auction listing describes a car only as an S Special without indicating Type I or Type II.


S Special Type II

Mazda added the S Special Type II during the August 1995 update. It used the later NA8C specification with a 1.8-litre BP-ZE engine, five-speed manual gearbox and Bilstein suspension. The factory wheel specification moved to 15 inches, distinguishing it from the smaller wheels associated with the earlier Type I.

The Type II also benefited from the mechanical changes introduced during the 1995 revision, including revised engine response and final-drive gearing. Although the engine still produced 130 PS, these changes affected how the car delivered its performance. An original Type II should be identified through its production date and factory equipment rather than the presence of 15-inch wheels alone.


J Limited

The J Limited was Mazda's first Japanese-market NA special edition, introduced in 1991 with production restricted to 800 cars. It used the 1.6-litre NA6CE and was finished in Sunburst Yellow, a colour unavailable on the regular range at the time. The edition combined its distinctive paintwork with selected convenience equipment and factory alloy wheels. Both manual and automatic examples appear in Japanese catalogue records.

The J Limited's main identifying feature is its original factory colour, although the chassis history and equipment should also be checked. Some standard Roadsters have subsequently been repainted yellow, while genuine J Limited examples may have received replacement panels. A factory yellow car with consistent paint-code records and documented accident history is preferable to relying on exterior photographs alone.


S Limited

The S Limited was introduced in December 1992, based on the 1.6-litre S Special. Mazda produced 1,000 examples with Brilliant Black bodywork, red leather seats and distinctive red interior trim. Factory BBS wheels and the S Special suspension equipment were included, while the five-speed manual transmission retained the 120 PS B6-ZE engine.

The combination of black paint, red upholstery and sporting suspension makes the S Limited straightforward to recognise when its original equipment remains intact. The red seat coverings and interior panels are particularly important because replacement parts from ordinary NA models do not reproduce the factory appearance. Mechanical condition should still take priority over the special-edition name, particularly on cars with altered suspension.


Tokyo Limited

The Tokyo Limited appeared in 1993 as a regional Japanese-market edition, with just 40 cars offered through Tokyo-area dealerships. It combined Brilliant Black bodywork with distinctive ivory interior equipment associated with the earlier M2 1002. Unlike the specialist M2 model, the Tokyo Limited used a conventional NA8C mechanical specification rather than a separately tuned engine.

Its unusual interior is the main reason the model is identifiable today. The ivory leather, matching trim and limited-edition exterior details distinguish it from a black NA8C fitted with replacement seats. Because the edition was distributed in such small numbers, documentation supporting the original model specification is essential before treating an advertised example as a genuine Tokyo Limited.


J Limited II

The J Limited II was introduced around the end of 1993, with Japanese catalogue listings appearing in January 1994. Mazda again used Sunburst Yellow paint, but this version was based on the 1.8-litre NA8C. Production was restricted to 800 cars. A black windscreen surround, revised alloy wheels and separate-headrest bucket seats distinguished it from the original 1.6-litre J Limited.

The larger BP-ZE engine produced 130 PS, giving the J Limited II a different mechanical specification from its predecessor. Japanese listings sometimes group both editions together because of their yellow paint, so the NA6CE or NA8C code provides the first distinction. The original wheels, interior and factory black windscreen surround help establish whether the later car retains its complete equipment.


RS Limited

Mazda introduced the RS Limited in 1994 as a 500-car edition based on the NA8C S Special. Its equipment included Recaro full-bucket seats, 15-inch BBS alloy wheels and sporting suspension components. Montego Blue Mica was the dedicated exterior colour. The engine remained the naturally aspirated 1.8-litre BP-ZE, producing 130 PS through a five-speed manual gearbox.

The RS Limited is more extensively equipped for sporting use than most NA special editions. Its factory seats, wheels and suspension are important identifying components, particularly because many examples have subsequently been used for circuit driving or modified with alternative equipment. A standard S Special fitted with Recaro seats should not automatically be considered an RS Limited.


G Limited

The G Limited was announced in December 1994 and offered in the Japanese market during 1995, with production limited to 1,500 cars. It featured Satellite Blue Mica paint, a matching dark-blue fabric roof and dedicated interior upholstery using suede-like materials. The mechanical specification was based on the regular 1.8-litre NA8C rather than the more heavily equipped sporting limited editions.

Its original blue roof and interior are particularly important because they distinguish the G Limited from an ordinary NA8C painted in a similar colour. Many surviving Roadsters have received replacement black roofs, while ageing upholstery may have been replaced or retrimmed. The G Limited therefore requires close examination of the factory colour and trim combination, not simply the model name used in a retail advertisement.


R Limited

The R Limited arrived in February 1995 as a Japanese special edition based on the 1.8-litre S Special, with production limited to 1,000 cars. Mazda used Satellite Blue Mica paint, a dark-blue fabric roof and distinctive red interior upholstery. Factory sporting equipment included Bilstein suspension, BBS alloy wheels and revised final-drive gearing.

The R Limited's specification was substantially different from the comfort-oriented G Limited, despite sharing a similar blue exterior colour. The red interior and S Special-derived mechanical equipment identify the sporting model. Japanese advertisements should be checked for original wheel specification, seat coverings and differential equipment, especially where previous owners have modified the suspension or replaced the interior.


VR Limited Combination A

The VR Limited Combination A was introduced for the later NA8C series, with 700 examples produced for Japan. Mazda used Art Vin Red Mica paint with a tan fabric roof and taupe leather upholstery. The edition was based on the S Special Type I, retaining Bilstein dampers, additional chassis equipment and a five-speed manual gearbox. Dedicated 15-inch five-spoke alloy wheels and aluminium interior fittings completed the package.

Combination A combined the mechanical equipment of a sporting Roadster with a distinctive colour and upholstery arrangement. It was not fitted with a more powerful engine than the regular NA8C. Original seat leather, the tan roof, wheels and special interior fittings are important because replacing them with standard components makes the edition harder to identify from photographs.


VR Limited Combination B

The VR Limited Combination B used the same S Special Type I mechanical basis but a completely different factory colour combination. Mazda selected Excellent Green Mica paint, a dark-green fabric roof and black leather upholstery. Production was limited to 800 cars, with the 1.8-litre BP-ZE engine and five-speed manual gearbox retained.

Combination B shared the VR Limited's 15-inch wheels, aluminium trim details and sporting suspension equipment. Its green roof and black interior distinguish it from Combination A, which used red paint and tan upholstery. The factory colour, seat material and original wheels should be checked together because an ordinary green NA8C fitted with aftermarket parts does not have the same specification.


R2 Limited

The R2 Limited appeared in December 1996 as one of the final NA8C special editions. Mazda produced 500 examples based on the S Special, using Chaste White paint and a distinctive red interior. Factory equipment included dedicated 15-inch five-spoke alloy wheels, red leather seats, red carpeting and aluminium interior controls. The edition was offered exclusively with a five-speed manual gearbox.

The R2 Limited retained the 130 PS BP-ZE engine and sporting suspension equipment of its S Special basis. Its combination of white bodywork and red interior provides an obvious identification point, but the original wheels and cabin fittings should also be present. A repainted or retrimmed example may still be genuine, although supporting factory documentation becomes more important when distinctive equipment has been removed.


B2 Limited 

Mazda introduced the B2 Limited alongside the R2 Limited in December 1996. Based on the M Package, the B2 used Twilight Blue Mica paint, a dark-blue fabric roof, polished 14-inch alloy wheels and chrome-plated exterior mirrors. Production was limited to 1,000 examples, with both five-speed manual and four-speed automatic versions available.

The B2 Limited did not receive the complete sporting suspension package of the R2 Limited. Its mechanical specification remained closer to the ordinary M Package, making the distinctive body colour, roof and polished exterior equipment its defining features. The original dark-blue roof deserves particular attention because it can be replaced with a conventional black item during restoration.


SR Limited

The SR Limited was released in August 1997 as one of the final Japanese NA special editions. Mazda limited production to 700 cars and based the model on the M Package. Factory colours were Chaste White and Sparkle Green Metallic. The cabin received leather and nubuck-style upholstery, matching door trim and additional decorative equipment. Polished alloy wheels and chrome-plated exterior mirrors distinguished the bodywork.

Unlike the ordinary M Package, five-speed manual SR Limited models received a Torsen limited-slip differential. The engine remained the 130 PS BP-ZE, with no separate performance increase. Mazda's original Japanese announcement confirms the production limit and equipment package, making it particularly useful when checking the authenticity of an advertised SR Limited. The original upholstery and differential specification are both important to its identification.


M2 1001

The M2 1001 was developed by Mazda's specialist M2 subsidiary and announced in November 1991, with customer deliveries beginning in 1992. Production was limited to 300 cars. Based on the NA6CE, it received a modified 1.6-litre engine producing 130 PS. Engine changes included higher-compression pistons, revised camshafts, cylinder-head work, a lighter flywheel, dedicated exhaust components and altered engine management.

M2 also revised the suspension, steering and differential specification. Equipment included a mechanical limited-slip differential, uprated suspension, specialist bucket seats, an aluminium roll bar and distinctive front bodywork incorporating auxiliary lamps. Power steering and some convenience equipment were omitted to reduce weight and simplify the car. The 1001 was a complete specialist model, so original M2 engine and chassis components are central to its identity. Converting a standard NA6CE to a similar appearance does not reproduce the factory specification.


M2 1002

The M2 1002 followed in 1992 and took a different approach from the 1001. It retained the standard 1.6-litre engine output rather than receiving the extensive mechanical tuning of the earlier M2 car. Its main changes concerned the body and cabin, including dedicated exterior styling, ivory leather upholstery, a blue fabric-covered dashboard and genuine wood interior trim.

M2 originally planned a larger production run, but only 100 examples were built. The 1002's distinctive cabin makes it one of the more difficult NA models to restore correctly because many components were produced specifically for this version. A conventional V Special with cream-coloured aftermarket upholstery should not be confused with the M2 1002. The original interior and documented M2 identification are essential when assessing one for import.


M2 1028

The M2 1028 arrived in 1994 using the 1.8-litre NA8C as its mechanical basis. Its modified BP-ZE engine produced approximately 140 PS, while additional work focused on reducing weight and improving chassis response. Factory equipment included a lightweight detachable FRP hardtop, aluminium boot lid, specialist suspension, forged wheels, full-bucket seats and a substantial roll cage.

Production was limited to 300 cars. Unlike a conventional Eunos Roadster, the 1028 did not have a standard folding fabric roof, although a simplified roof arrangement was available separately. Its original lightweight components and specialist chassis equipment are fundamental parts of the model. Replacing the original hardtop, seats or engine components with standard Roadster parts may substantially change both the car's specification and its collector value.

Mazda Roadster NB series

Mazda Roadster NB series (January 1998 – August 2005)


Mazda introduced the second-generation Roadster in Japan on 8 January 1998, replacing the Eunos name with Mazda Roadster. The new NB retained the original 2,265 mm wheelbase, front-engine rear-wheel-drive layout and double-wishbone suspension at both ends. Its fixed headlights replaced the NA's pop-up units, while the body gained additional structural reinforcement and improved crash protection. Mazda offered two naturally aspirated four-cylinder petrol engines: a 1.6-litre producing 125 PS and a revised 1.8-litre producing 145 PS. Japanese 1.6-litre models used the NB6C chassis designation, while the 1.8-litre versions were identified as NB8C.

The transmission arrangements depended on engine and grade. NB6C models used a five-speed manual or four-speed automatic, while the 1.8-litre S, RS and VS introduced a six-speed manual with closer intermediate ratios. The 1.8-litre S and VS were also available with a four-speed automatic. Mazda fitted dual front airbags across the Japanese range, revised the cabin and increased boot capacity without substantially changing the car's exterior dimensions. The original RS received Bilstein dampers, additional body reinforcement and a limited-slip differential, while the VS offered leather upholstery and wood interior trim.

The July 2000 revision brought the largest mechanical change of the NB generation. Mazda fitted the 1.8-litre engine with S-VT variable intake valve timing, increasing output from 145 PS to 160 PS on six-speed manual models. The revised engine also produced 170 Nm at 5,500 rpm. Mazda reinforced the body structure, revised suspension tuning and braking characteristics, redesigned the front bumper and headlights, and introduced new high-back seats. The updated RS received larger 16-inch wheels and brakes, while the RS-II added a different interior and equipment specification. The 1.6-litre engine continued with 125 PS in manual form.

Mazda expanded the Japanese line-up beyond the regular grades. The 10th Anniversary Model went on sale in January 1999, followed by the NR Limited in January 2000.  

The YS Limited arrived in December 2000, while the MazdaSpeed Roadster followed in May 2001 with dedicated suspension, exhaust and exterior components. December 2001 brought the NR-A, developed as a road-registerable base for the Japanese Roadster Party Race championship. The MV Limited appeared during the same month, combining the 1.6-litre engine with exclusive paint and leather upholstery.

Further changes arrived in July 2002, when Mazda revised equipment and introduced the VS Combination A and Combination B specifications. The SG Limited followed in December 2002, available with either a 1.6-litre or 1.8-litre engine. Mazda made additional improvements to interior materials, exterior details and equipment in September 2003. The NB also produced two unusual Japanese-market derivatives: the factory-built Roadster Coupe, introduced in October 2003, and the limited-production Roadster Turbo, announced in December 2003 and released in February 2004. The turbocharged 1.8-litre engine developed 172 PS and 209 Nm, supported by a strengthened drivetrain and dedicated suspension.

Japanese NB prices vary considerably between ordinary NB6C models and original six-speed RS, MazdaSpeed or factory Turbo examples. Before comparing asking prices, check the front chassis rails, sills, rear wheel arches and evidence of previous modifications. A 1998 NB8C RS and a 2002 RS-II share the same basic layout but differ in engine output, body reinforcement, wheels, brakes and equipment. 

The fabric roof, differential and gearbox should also be inspected, particularly on cars with evidence of previous competition use. For an Irish buyer, the exact Japanese production date is another consideration, because the earliest NB Roadsters will begin reaching the 30-year threshold in January 2028.


Current Japanese retail price: Around ¥280,000–¥4.28 million (approximately €1,600–€24,500 / $1,800–$26,900). Japanese retail listings include everything from inexpensive, high-mileage NB6C cars to more expensive original RS, MazdaSpeed and factory Turbo examples. Asking prices depend on condition, repair history, mileage, originality and the specific Japanese grade. The lowest-priced examples include high-mileage cars, modified vehicles and those with repair histories. Ordinary NB6C and NB8C models occupy much of the middle of the market, while preserved six-speed RS examples, low-mileage cars and limited editions can command considerably more. Original MazdaSpeed and Turbo models may also attract a premium because of their limited production. These are Japanese advertised retail prices, not auction results or Irish landed costs, and individual listings can change or disappear.

Import cost considerations: Japanese retail prices exclude domestic transport, export handling, shipping, marine insurance, customs clearance, applicable import duty, Irish VAT, VRT and registration expenses. Irish import VAT is generally charged at 23%, while customs duty depends on tariff classification and whether preferential origin treatment can be established under the EU-Japan trade agreement. The earliest January 1998 cars begin reaching the classic threshold in January 2028, with later NB models following according to their actual age. Factory emissions documentation and a provisional VRT assessment should be obtained before calculating the complete Irish landed cost.

Engine output:

  • 1.6-litre B6-series DOHC petrol, five-speed manual: 125 PS at 6,500 rpm / 142 Nm at 5,000 rpm
  • Later 1.6-litre B6-series DOHC petrol, four-speed automatic: 120 PS at 6,500 rpm / 139 Nm at 5,000 rpm
  • 1.8-litre BP-ZE DOHC petrol, January 1998–July 2000: 145 PS at 6,500 rpm / approximately 163 Nm at 5,000 rpm
  • 1.8-litre BP-VE DOHC petrol with S-VT, from July 2000, six-speed manual: 160 PS at 7,000 rpm / 170 Nm at 5,500 rpm
  • 1.8-litre BP-VE DOHC petrol with S-VT, later four-speed automatic: 154 PS at 7,000 rpm / 167 Nm at 5,500 rpm
  • 1.8-litre BP turbocharged petrol, Roadster Turbo: 172 PS at 6,000 rpm / 209 Nm at 5,500 rpm

Note: The 1.6-litre automatic output was reduced to 120 PS on later Japanese specifications. The 160 PS rating applies to the revised naturally aspirated 1.8-litre manual, not the earlier 145 PS engine or the later 154 PS automatic. Mazda's original 1998 release identifies the 1.6-litre engine as B6-ZF, while later Japanese technical catalogues use B6-ZE (RS) notation. The exact production period and factory documentation should be used when identifying an individual engine.

Engine: Japanese NB6C models use a 1,597 cc naturally aspirated DOHC 16-valve petrol engine from Mazda's B6 family. The engine uses electronic fuel injection, a cast-iron cylinder block, an aluminium cylinder head and a timing belt. The NB8C initially used the 1,839 cc BP-ZE with revised intake and exhaust components. Mazda's July 2000 update introduced the BP-VE with S-VT variable intake timing, allowing the engine to produce more power at higher engine speeds without adding a turbocharger. The factory Roadster Turbo used a separately developed intercooled 1.8-litre turbocharged engine, together with reinforced drivetrain components. The engines share a conventional longitudinal installation and rear-wheel-drive layout, but the early BP-ZE, later BP-VE and turbocharged specifications are mechanically different.

Best for: Drivers looking for a compact Japanese rear-wheel-drive sports car with more structural refinement than the original NA while retaining relatively simple mechanical systems. The NB6C suits buyers who prefer the lighter 1.6-litre specification, while the early NB8C provides a 145 PS engine and six-speed manual option. Later 160 PS RS and RS-II models offer additional chassis and braking equipment. The VS and VS Combination models suit buyers looking for factory leather interiors and traditional trim, while the NR-A was developed specifically for road-registered competition. MazdaSpeed and Turbo editions are more appropriate for enthusiasts seeking original limited-production specifications.

Body style: Two-door, two-seat open-top sports car with a manually operated fabric roof, fixed headlights and a separate rear boot. Standard Japanese NB models measure approximately 3,955 mm long, 1,680 mm wide and 1,235 mm high, with a 2,265 mm wheelbase. The cabin retains a low driving position, short gear lever and relatively narrow transmission tunnel. A glass rear window was introduced with the NB, providing better durability than the NA's original plastic window. Equipment such as the heated rear window varied by grade. Removable hardtops were available, but the factory Roadster Coupe was a separately manufactured fixed-roof model rather than an ordinary convertible fitted with a detachable roof.

Drive: Front-engine, rear-wheel drive throughout the Japanese NB range. Mazda retained independent double-wishbone suspension front and rear, with disc brakes at all four wheels. Factory limited-slip differential equipment varied by grade and production period. The RS used additional chassis reinforcement, Bilstein dampers and larger brakes, while the NR-A added reinforced mounts, a higher-capacity radiator and equipment developed for Japanese one-make racing. The 2000 facelift brought further structural improvements. The Roadster Turbo received its own lowered suspension, reinforced drivetrain and 17-inch wheels. Original suspension specification is particularly important because many surviving NB Roadsters have been fitted with coilovers, altered anti-roll bars or aftermarket differentials.

Transmission: Five-speed manual on Japanese 1.6-litre models and six-speed manual on the 1.8-litre sporting grades, with four-speed electronic automatic transmissions available on selected 1.6-litre and 1.8-litre specifications. The RS, RS-II, NR Limited, 10th Anniversary Model, MazdaSpeed Roadster and Roadster Turbo used six-speed manual transmissions. The NR-A was offered exclusively with a five-speed manual. Mazda revised manual and automatic gearbox specifications during production, so transmission type must be checked against the original grade and year. Synchromesh condition, clutch engagement, gearbox noise and differential operation are relevant on cars that have been modified or driven regularly on circuits.

Notable features: Fixed headlights replacing the NA's pop-up units, independent double-wishbone suspension, 1.6-litre and 1.8-litre naturally aspirated engines, six-speed manual gearbox on selected NB8C grades, S-VT variable intake valve timing from July 2000, Bilstein dampers, factory limited-slip differentials, revised structural reinforcement, 16-inch RS wheels, NR-A competition specification, 200-unit MazdaSpeed Roadster, 350-unit Roadster Turbo, 500 Japanese-market 10th Anniversary models and the separately manufactured Roadster Coupe.


What the Japanese chassis codes tell you about a Roadster

The Japanese second-generation Mazda Roadster uses two principal chassis codes. NB6C identifies the 1.6-litre Roadster, which retained Mazda's B6-series naturally aspirated engine throughout production. Early NB6C cars included the basic model, M Package and Special Package, followed by M, SP and NR-A after the July 2000 revision.

NB8C identifies the 1.8-litre Roadster. Japanese launch models used the 145 PS BP-ZE engine, while the July 2000 update introduced the 160 PS BP-VE with S-VT on manual specifications. This means two NB8C RS cars can have significantly different engine outputs depending on production year, even though both use a six-speed manual gearbox.

The NB8C code also covers the factory Roadster Turbo. Mazda retained the 1,839 cc displacement but added an intercooled turbocharger, strengthened drivetrain components and a dedicated chassis specification. A Turbo cannot be identified simply from the NB8C designation, because ordinary naturally aspirated S, RS, RS-II and VS models use the same chassis family.

Japanese catalogue codes also changed from GF-NB6C and GF-NB8C to GH-NB6C and GH-NB8C during the later production period. These prefixes are regulatory model designations and should not be confused with separate generations. Mazda enthusiasts commonly describe the NB's development as NB1, NB2, NB3 and NB4, referring to successive production revisions rather than four separate generations.

The July 2000 facelift is an important dividing point. Early models have the original headlamp and bumper arrangement, while later cars received redesigned lights, additional body reinforcement and the revised 1.8-litre S-VT engine. The 2002 and 2003 updates brought further changes to safety equipment, interior materials and factory specifications without changing the fundamental NB6C or NB8C designation.

The chassis code should be checked against the production month, engine, gearbox and original grade. A 1999 NB8C VS automatic, a 2002 NB8C RS-II manual and a 2004 NB8C Turbo have different power outputs, transmissions and factory equipment. Japanese auction sheets and retail advertisements should identify the original model correctly before a buyer starts comparing mileage, colour and asking price.


Japanese Mazda Roadster NB series grades

Mazda launched the Japanese NB Roadster with three 1.6-litre specifications: Standard, M Package and Special Package. The 1.8-litre range consisted of S, RS and VS. The 1.6-litre models offered a five-speed manual or, on selected grades, a four-speed automatic, while the 1.8-litre range introduced a six-speed manual gearbox. The RS received Bilstein suspension and additional chassis equipment, while VS combined the larger engine with leather upholstery and more extensive interior trim.

The July 2000 revision changed the range to M and SP for the 1.6-litre models, alongside S, RS, RS-II and VS for the 1.8-litre versions. Mazda later introduced NR-A with upgraded brakes, suspension and drivetrain equipment for Japanese one-make racing. The VS range was reorganised into Combination A and Combination B in July 2002, offering different leather interiors, roof colours and decorative finishes.

Several Japanese special editions were produced during the NB generation. The 10th Anniversary Model and NR Limited arrived before the major facelift, while YS Limited, MazdaSpeed Roadster, MV Limited and SG Limited followed afterwards. The factory Roadster Turbo was introduced near the end of production with a 172 PS engine and extensively revised drivetrain.

The original grade matters when comparing Japanese listings. A modified 1.6-litre SP may resemble an NR-A, while an early RS fitted with later 16-inch wheels does not automatically have the revised engine, larger brakes or chassis reinforcement introduced in 2000. Limited-edition body colours and interior fittings also need to match the original specification, particularly where the car has been restored or previously repaired.


Standard car

The standard NB6C was the simplest Japanese Roadster specification when the second generation arrived in January 1998. It used the 1.6-litre 125 PS engine and five-speed manual gearbox. Factory equipment was restricted compared with the M Package and Special Package, with steel wheels, manual windows and no standard power steering. Mazda also offered an air-conditioning-delete version. The basic Roadster retained the aluminium bonnet, independent double-wishbone suspension and driver and passenger airbags fitted to the wider NB range.

The standard car did not receive the Torsen limited-slip differential fitted to several higher-grade manual models. Its simpler equipment also meant less weight, although accessories added by previous owners can change that. The grade disappeared when Mazda reorganised the line-up in July 2000. A Japanese advertisement describing a later NB as a standard model may simply mean that it is an ordinary M rather than an original 1998–2000 Standard.


M Package

The M Package was one of the original Japanese NB6C specifications, introduced in January 1998. It retained the 125 PS 1.6-litre engine but added convenience equipment to the Standard model, including power steering and electric windows. Buyers could select a five-speed manual or four-speed automatic transmission. It used conventional suspension rather than the Bilstein equipment fitted to the sporting 1.8-litre RS.

The M Package did not receive the factory Torsen limited-slip differential associated with higher-grade manual Roadsters. Its specification was principally about everyday equipment, making it different from the similarly priced Special Package. Mazda discontinued the M Package name during the July 2000 update and introduced the M grade in the revised range. The production date therefore matters when distinguishing an early M Package from a later M.


Special Package

Special Package was the higher-equipped 1.6-litre Roadster at the January 1998 launch. It used the same 125 PS engine as Standard and M Package but added alloy wheels, upgraded interior and convenience equipment, and a factory Torsen limited-slip differential on manual models. A five-speed manual and four-speed automatic were available, although the automatic did not share the manual's complete drivetrain specification.

The Special Package provided a 1.6-litre alternative to the more expensive NB8C models without introducing the RS's Bilstein suspension. It also retained the smaller wheels and brakes associated with the ordinary NB6C. The grade was replaced by SP when Mazda revised the Roadster range in July 2000. Early Special Package cars are therefore mechanically related to later SP models, but the facelifted cars received changes to exterior styling, equipment and some chassis components.


M

Mazda introduced the M grade in July 2000 as the entry point to the revised NB6C range. It used the naturally aspirated 1.6-litre engine producing 125 PS and offered either a five-speed manual or four-speed automatic transmission. Compared with the original Standard model, M included more everyday equipment, including power steering, electric windows and a glass rear window with heating equipment. The facelift also brought revised headlights, bumper styling and interior details.

The M retained a simpler drivetrain and chassis specification than the SP and NR-A. It did not have their factory limited-slip differential and upgraded suspension equipment. A 2001 M is therefore different from an SP of the same year, despite using the same engine and gearbox options. The M also provided the basis for the YS Limited, which added special interior fittings without changing the basic 1.6-litre powertrain.


SP

SP replaced the earlier Special Package name in July 2000, becoming the better-equipped regular 1.6-litre Roadster. Mazda fitted the 125 PS B6-series engine, with five-speed manual and four-speed automatic choices. The SP included alloy wheels, a Torsen limited-slip differential on manual specifications and additional convenience equipment compared with M. It also received the updated headlight arrangement, improved interior and other changes introduced during the facelift.

The SP remained available through the later NB production years. Its 1.6-litre engine was not upgraded to the 160 PS S-VT specification used in the NB8C, and later automatic examples were rated at 120 PS. SP models also formed the basis for the MV Limited. When comparing Japanese examples, gearbox type, differential equipment and production month are more useful than the SP badge alone. A manual SP can have a different factory drivetrain specification from an automatic car with similar mileage and appearance.


S

S was the entry-level 1.8-litre Japanese Roadster, introduced in January 1998 with the 145 PS BP-ZE engine. Buyers could choose a six-speed manual or four-speed automatic, while the factory specification included the larger 1.8-litre drivetrain and associated chassis equipment. The S sat below RS and VS, providing the same basic engine without the RS's dedicated Bilstein suspension or the VS's leather and wood interior package.

The July 2000 update increased the six-speed manual S to 160 PS through the revised BP-VE engine with S-VT variable intake timing. The facelift also brought the updated body and interior, while S continued using a less specialised suspension and wheel specification than RS. Mazda eventually removed the S from the regular Japanese range, leaving RS and RS-II as the main later 1.8-litre sporting grades. An early S and a post-facelift S therefore differ in power output even though both carry the same grade name.


RS

RS was the main sporting 1.8-litre Roadster from the January 1998 launch. It used the 145 PS BP-ZE engine with a six-speed manual gearbox, Bilstein dampers, front strut-tower reinforcement and a Torsen limited-slip differential. The original specification included 15-inch wheels with 195/50R15 tyres. Mazda also added reinforcement around the suspension mounting points to improve body control under cornering loads.

The July 2000 revision brought the 160 PS BP-VE engine, 205/45R16 tyres, revised Bilstein dampers and larger brake discs. Mazda strengthened the body further with additional cross-members and chassis bracing. These changes distinguish the later RS from the original 145 PS version, particularly where an early car has been fitted with larger aftermarket wheels. The RS remained one of the principal Japanese grades until NB production ended, making its production date and original suspension equipment important when comparing examples.


RS-II

RS-II joined the Japanese range in July 2000 as a more extensively equipped version of the facelifted RS. It used the same 160 PS BP-VE engine, six-speed manual gearbox, Bilstein dampers, larger brakes and 16-inch wheels. Its principal distinction from the regular RS was the red-and-black interior, including dedicated seat upholstery and matching trim. Audio equipment should be checked against the Japanese factory specification for the car's production year.

The RS-II was not a separate higher-output version of the RS. Its engine, transmission and principal chassis components were closely related to the regular facelifted RS. A genuine example should retain the red interior equipment, correct factory wheels and other grade-specific fittings. Replacement seats or steering wheels are common on cars prepared for track use, so an RS-II advertised with a completely black interior deserves further identification checks rather than being accepted solely on the seller's description.


VS

VS was the more luxurious Japanese 1.8-litre Roadster when the NB arrived in January 1998. It used the 145 PS BP-ZE engine and was available with either a six-speed manual or four-speed automatic. The interior included leather upholstery, Nardi wood-trimmed controls and coordinated cabin finishes, while exterior specifications included distinctive paint and roof combinations. Its suspension and wheel arrangement differed from the more focused RS.

The VS received the 2000 facelift, including the revised 1.8-litre engine and updated exterior details. Its six-speed manual version gained 160 PS, while later automatic versions were rated at 154 PS. Mazda continued the leather-trimmed specification until July 2002, when VS was replaced by Combination A and Combination B. The original leather, wood fittings, roof material and factory colours are relevant when identifying a VS, especially where previous owners have retrimmed the seats or replaced the fabric roof.


VS Combination A

Mazda introduced VS Combination A in July 2002, replacing the previous single VS specification with two distinct interior choices. Combination A used black leather bucket seats, matching black interior trim and a black water-repellent fabric roof. Aluminium-look centre and gearshift panels replaced the more traditional wood finishes associated with earlier VS models. It retained the naturally aspirated 1.8-litre BP-VE engine, with a six-speed manual or four-speed automatic.

The manual produced 160 PS, while the later automatic was rated at 154 PS. Combination A did not receive the RS's Bilstein suspension or 16-inch sporting wheel package as standard. Mazda intended the specification to combine the higher-grade cabin with a more contemporary interior appearance. The original black leather, fabric roof and aluminium-effect trim are useful identifying details, particularly because the engine and chassis code are shared with Combination B.


VS Combination B

VS Combination B arrived alongside Combination A in July 2002, using the same 1.8-litre engine and choice of six-speed manual or four-speed automatic. Mazda fitted beige leather seats, matching interior trim, a beige water-repellent fabric roof and dark wood-effect finishes on the steering wheel, gear lever and centre console. These details continued the more traditional appearance of the earlier VS, but with revised materials and a different factory colour arrangement.

Combination B shared its underlying drivetrain with Combination A, so the distinction was primarily equipment and interior finish rather than performance. The original beige roof and leather upholstery require careful inspection for staining, wear and water damage. A later NB8C described simply as VS should be checked against its production date and cabin specification, since the Combination A and B models were the factory configurations offered during the final years.


NR-A

Mazda introduced NR-A in December 2001 as a 1.6-litre Roadster prepared for Japanese road-registered motorsport. It used the 125 PS B6-series engine and a five-speed manual gearbox, but received a higher-capacity radiator, limited-slip differential, reinforced engine and differential mounts, Bilstein dampers, larger brakes, additional chassis bracing and 15-inch wheels. Its suspension and braking equipment was considerably more extensive than that of an ordinary M or SP.

The NR-A was developed for the Roadster Party Race series, which Mazda supported from 2002. A dealer-installed Mazdaspeed NR-A package provided competition equipment such as a six-point roll cage, harness mounting provisions and towing hooks. Those items were not automatically fitted to every road-going NR-A. For an Irish buyer, identifying original NR-A equipment and previous competition use is essential. A road car fitted with an aftermarket roll cage is not necessarily a genuine NR-A, and a genuine NR-A may have undergone years of circuit use without retaining its original suspension or interior.


10th Anniversary Model

Mazda introduced the 10th Anniversary Model in January 1999 to commemorate ten years since the original Roadster's debut. Production was limited to 7,500 cars worldwide, with 500 allocated to Japan. The Japanese version was based on the 1.8-litre RS, using the 145 PS BP-ZE engine and six-speed manual gearbox. Its dedicated Innocent Blue Mica exterior was matched with a blue fabric roof, polished alloy wheels and a blue-and-black interior. Mazda also fitted a BOSE sound system and additional convenience equipment.

The interior received blue suede-like seat centres, black leather seat bolsters, a two-tone Nardi steering wheel, blue gearshift trim and chrome instrument rings. Each car carried a numbered front-wing badge, a special ignition key and an owner's certificate identifying the production number and chassis. These details are useful when checking a Japanese example, particularly because the edition shares its basic mechanical specification with the regular pre-facelift RS. A genuine Japanese-market 10th Anniversary Model should also be distinguished from the examples supplied to other countries, even though Mazda developed the edition around a largely common specification.


NR Limited

The NR Limited went on sale in Japan on 18 January 2000, with production restricted to 500 cars. Mazda based it on the 1.8-litre S six-speed manual, retaining the original 145 PS naturally aspirated engine. Its Art Vin Red Mica paint was paired with a beige fabric roof, polished alloy wheels and a dedicated beige leather interior. Nardi wood controls, a wood-effect centre panel, white instrument faces and chrome surrounds gave the cabin a specification different from the ordinary S.

Mazda also included BOSE audio, power door locks, electric mirrors and additional interior equipment. Despite the NR name, this was not a competition model and should not be confused with the later NR-A. The NR Limited used the standard 1.8-litre S mechanical basis, while its special paint, leather, roof and wood fittings provided the main differences. Originality is particularly relevant because the beige upholstery and matching roof can be difficult to reproduce using ordinary Japanese NB replacement parts.


YS Limited

The YS Limited arrived in December 2000 as a 700-car Japanese special edition based on the facelifted 1.6-litre M. Mazda retained the 125 PS naturally aspirated petrol engine and offered five-speed manual and four-speed automatic transmissions. Blacked-out headlamp surrounds, titanium-coloured centre and door panels, and a black-and-titanium Nardi leather steering wheel distinguished the edition. Exterior colour choices included Black Mica, Pure White and Sunlight Silver Metallic.

Mazda also included keyless entry, power door locks, titanium-coloured seat stitching and stainless-steel sill plates. The automatic specification received four-wheel ABS with electronic brake-force distribution. YS stood for Youthful & Sports, reflecting the edition's interior treatment rather than additional engine or suspension performance. The YS Limited did not receive the NR-A's competition equipment or the RS's 1.8-litre engine. Its original interior panels, steering wheel and dark headlamp surrounds are the main details separating it from an ordinary 2001 M.


MazdaSpeed Roadster

Mazda released the MazdaSpeed Roadster in May 2001, limiting production to 200 cars for Japan. It was based on the facelifted 1.8-litre RS with the 160 PS BP-VE engine and six-speed manual gearbox. MazdaSpeed fitted four-position adjustable dampers, a dedicated exhaust manifold, sports exhaust and reinforced engine and differential mounts. The changes concentrated on suspension response, drivetrain movement and exhaust characteristics rather than introducing a turbocharger or a larger engine.

The exterior used Starry Blue Mica paint, gold alloy wheels, dedicated front, side and rear aerodynamic components, fog lamps and MazdaSpeed identification. Inside, Mazda added blue stitching, blue instrument surrounds, a carbon-effect centre panel and a Kenwood audio system. The MazdaSpeed Roadster is therefore a different factory model from the 2004 Roadster Turbo. A car advertised as MazdaSpeed because it has an aftermarket body kit or MazdaSpeed accessories should not be confused with one of the original 200 production examples.


MV Limited

The MV Limited was released in December 2001, with Mazda planning 300 cars for the Japanese market. It used the 1.6-litre SP as its basis, retaining the 125 PS petrol engine and offering both five-speed manual and four-speed automatic transmissions. Titanium Grey Metallic was the dedicated exterior colour, paired with a brown-red leather interior and matching trim. Mazda fitted 15-inch alloy wheels, Nardi leather steering-wheel trim, aluminium-look interior panels and a matching soft-top cover.

Five-speed manual examples also received aluminium pedals. The MV Limited retained the ordinary SP's basic mechanical specification, including its 1.6-litre engine, rather than the NR-A's strengthened competition chassis. Its brown-red seats and door panels make the model distinctive, particularly when combined with the factory grey paint. These parts should be examined carefully because an ordinary Titanium Grey SP fitted with replacement leather seats does not necessarily have the MV Limited's original factory specification.


SG Limited

Mazda introduced the SG Limited in December 2002, planning a combined production run of 400 cars for Japan. Unlike most NB special editions, it was offered with two engine configurations. The 1.6-litre version was based on the NR-A and used a five-speed manual gearbox, while the 1.8-litre version was based on the RS with the 160 PS engine and six-speed manual. Both retained the sporting chassis equipment of their respective base grades, including Bilstein dampers, larger brakes and a limited-slip differential.

The SG Limited used Cerion Silver Metallic paint, a blue fabric roof with a glass rear window, dedicated alloy wheels and blue interior upholstery. The 1.6-litre version received 15-inch wheels, while the 1.8-litre used 16-inch wheels. Mazda also included Nardi leather controls, aluminium-look interior trim, BOSE audio, ABS and keyless entry. An SG Limited advertised in Japan should therefore be checked for its NB6C or NB8C designation, since the two versions have different engines, gearboxes and mechanical foundations despite sharing the same exterior and interior colour scheme.


Turbo

Mazda announced the factory Roadster Turbo on 24 December 2003, with Japanese sales beginning in February 2004. Production was restricted to 350 cars. It used a 1,839 cc intercooled turbocharged petrol engine producing 172 PS at 6,000 rpm and 209 Nm at 5,500 rpm. Mazda strengthened the clutch, transmission, driveshafts and propeller shaft to cope with the additional torque. A Torsen limited-slip differential was fitted, while the final-drive ratio was changed from 3.909 to 4.100.

The suspension received dedicated lowering springs and Bilstein dampers, with 205/40R17 tyres on 17-inch alloy wheels. Exterior equipment included unique front and rear spoilers, darkened headlamp surrounds and Turbo identification. Buyers could select Velocity Red Mica, Pure White, Sunlight Silver Metallic or Grace Green Mica, together with several cloth and leather interior packages. The Turbo was considerably more than a conventional RS fitted with an aftermarket turbocharger. Its strengthened drivetrain, suspension, wheels and dedicated interior equipment are central to identifying a genuine example among Japanese retail listings.

Mazda Roadster NC series

Mazda Roadster NC series (August 2005 – May 2015)


Mazda introduced the third-generation Roadster in Japan on 25 August 2005, replacing the NB's 1.6-litre and 1.8-litre engines with a new 1,998 cc MZR petrol engine. The NC used the NCEC chassis designation and retained rear-wheel drive, but adopted a substantially different suspension layout. Double wishbones remained at the front, while a new multi-link rear suspension replaced the earlier double-wishbone arrangement. The wheelbase increased to 2,330 mm and the body grew to 1,720 mm wide, giving Mazda more space for its revised suspension, wider track and additional safety equipment.

The original Japanese range consisted of Roadster, RS and VS. Five-speed manual and six-speed automatic transmissions were available on the standard Roadster, while RS received a six-speed manual gearbox, Bilstein dampers, 17-inch alloy wheels and a torque-sensing limited-slip differential. VS offered saddle-tan leather upholstery and a choice of six-speed manual or automatic. Manual models produced 170 PS, compared with 166 PS for the automatic. The launch range also included the 500-car 3rd Generation Limited, finished in Velocity Red Mica with dedicated leather upholstery and exterior trim.

Mazda announced the NC NR-A in March 2006 as a road-registerable model developed for Japanese one-make racing. It retained the 170 PS 2.0-litre engine and five-speed manual gearbox, adding height-adjustable Bilstein dampers, a limited-slip differential, reinforced chassis equipment and 16-inch steel wheels. August 2006 brought the Power Retractable Hard Top (RHT), introducing an electrically operated folding roof that could open or close in approximately 12 seconds. The roof folded into a dedicated compartment behind the seats rather than occupying the boot, allowing the RHT to retain the soft-top model's luggage capacity. Mazda initially offered Roadster RHT, RS RHT and VS RHT, with different manual and automatic transmission combinations.

The first NC received several Japanese special editions, including the Japan Car of the Year Award Commemorative Model, Blaze Edition and Prestige Edition. Mazda E&T also introduced the MazdaSpeed M'z Tune in April 2007, based on the RS with revised engine management, intake and exhaust components, a lighter flywheel and adjustable Bilstein suspension. 

Mazda introduced a substantial facelift in December 2008. The revised car received a new front bumper and five-point grille, redesigned headlights, additional interior improvements and changes to steering and suspension behaviour. Manual engines gained revised internal components and a higher 7,500 rpm rev limit, with maximum power now produced at 7,000 rpm. Mazda also improved the six-speed manual gearbox and recalibrated the automatic transmission. The regular Japanese range was reorganised into S, NR-A and RS soft-tops, together with S RHT, RS RHT and VS RHT.

A further update arrived in July 2012, bringing a larger grille opening, revised throttle response on manual models and altered brake assistance. Mazda also introduced an active bonnet system to improve pedestrian protection. Later NC models received changes to interior finishes, wheels and safety equipment, while the 20th Anniversary Model, Black Tuned and 25th Anniversary Model added distinctive factory specifications. The final anniversary edition was restricted to just 25 Japanese-market cars, combining Soul Red Premium Metallic paint with a black retractable roof and selected engine components.

For an Irish buyer, the distinction between NC1, NC2 and NC3 is particularly relevant. An early 2006 RS, a 2010 VS RHT and a 2014 RS RHT use the same basic 2.0-litre engine family but differ in suspension tuning, engine revisions, roof equipment and safety features. Used Japanese examples should be checked for corrosion beneath the car, previous accident repairs, engine cooling issues, gearbox condition and suspension modifications. RHT models also require examination of the roof motors, latches, seals and drainage channels. Cars previously used for circuit driving may have additional wear to the differential, clutch, brakes and suspension mounting points.


Current Japanese retail price: Around ¥500,000–¥3 million+ (approximately €2,900–€17,200+ / $3,100–$18,800+). Early standard NC Roadsters and high-mileage automatics generally occupy the lower end of Japanese retail listings. Facelifted manual RS models and well-preserved late RHT examples tend to be advertised at higher prices. A Japanese market review based on July 2026 stock found approximately 150 NC Roadsters advertised, with average asking prices around ¥1.23 million and a broad ordinary-market range extending from approximately ¥400,000 to ¥2.9 million. Special editions and unusually original, low-mileage cars may be advertised above that range. The MazdaSpeed M'z Tune and Japanese 25th Anniversary Model are especially difficult to price because so few become available. These figures are indicative Japanese retail asking prices, not auction results or Irish landed costs.

Import cost considerations: Japanese retail prices exclude inland transport, export handling, shipping, marine insurance, customs clearance, applicable customs duty, Irish VAT, VRT and registration costs. The NC's 2.0-litre petrol engine, Japanese emissions documentation and individual vehicle age will influence its Irish registration costs. Both manual and automatic examples require a vehicle-specific VRT assessment rather than a calculation based solely on the engine size. The earliest NC Roadsters were introduced in August 2005, so they will begin reaching the 30-year threshold in August 2035. Eligibility for the €200 Category C VRT rate depends on the individual vehicle being more than 30 years old when registered in Ireland, supported by acceptable age documentation. Later cars must reach the same age individually. A low Japanese asking price should therefore be compared against the complete import cost before deciding whether an NC offers better value than a Roadster already registered in Ireland.

Engine output:

  • LF-VE 2.0-litre MZR DOHC petrol, 2005–2008 manual: 170 PS at 6,700 rpm / 189 Nm at 5,000 rpm
  • LF-VE 2.0-litre MZR DOHC petrol, 2005–2008 automatic: 166 PS at 6,700 rpm / 189 Nm at 5,000 rpm
  • Revised LF-VE 2.0-litre MZR DOHC petrol, from December 2008, manual: 170 PS at 7,000 rpm / 189 Nm at 5,000 rpm
  • Revised LF-VE 2.0-litre MZR DOHC petrol, from December 2008, automatic: 162 PS at 6,700 rpm / 189 Nm at 5,000 rpm

Note: The 2008 revision did not increase the manual engine's quoted maximum output above 170 PS. Instead, Mazda revised the engine internals and extended its operating range. The automatic's quoted output changed from 166 PS to 162 PS. MazdaSpeed M'z Tune retained the same underlying naturally aspirated 2.0-litre engine family, but received dedicated intake, exhaust and engine-management changes.

Engine: Mazda's 1,998 cc LF-VE MZR four-cylinder petrol engine, with an aluminium cylinder block and cylinder head, twin overhead camshafts, 16 valves, sequential fuel injection and variable intake valve timing. Unlike the belt-driven engines in the earlier NA and NB generations, the NC's MZR uses a timing chain. Mazda mounted the engine longitudinally behind the front axle line, connecting it to the rear wheels through either a manual gearbox or six-speed automatic transmission. The December 2008 revision introduced a forged crankshaft on manual models, revised pistons and valve springs, and changes to intake and exhaust characteristics. The 2.0-litre engine remained naturally aspirated throughout Japanese NC production, including the limited editions.

Best for: Drivers looking for a Japanese rear-wheel-drive roadster with a larger 2.0-litre engine, more cabin space and a choice of fabric or electrically operated roofs. Early soft-top models provide a relatively simple specification, while RS offers a six-speed manual, Bilstein suspension and limited-slip differential. NR-A is suited to buyers specifically interested in its competition-oriented equipment. The RHT models offer additional weather protection, with VS RHT providing leather upholstery and an automatic transmission in later production. NC2 and NC3 models suit those who want the revised engine, later chassis tuning and updated interior equipment.

Body style: Two-door, two-seat open-top sports car with a separate boot and either a manually operated fabric roof or electrically operated Power Retractable Hard Top. Early NC models measure approximately 3,995 mm long, 1,720 mm wide and 1,245 mm high, with a 2,330 mm wheelbase. Later bumper revisions increased the overall length slightly. The NC has a wider cabin than the NB, with a higher centre tunnel, larger door structures and storage compartments behind the seats. The RHT uses a folding roof with rigid panels that stow behind the seats, preserving the boot volume. The fabric-roof models retain a manual folding mechanism with a glass rear window. The roof drain system and water seals deserve particular attention on both configurations.

Drive: Front-engine, rear-wheel drive on every Japanese NC Roadster. Mazda used double-wishbone front suspension and independent multi-link rear suspension, together with ventilated front disc brakes and rear disc brakes. Factory torque-sensing limited-slip differentials were fitted to selected manual grades, including RS and NR-A. RS models received Bilstein dampers, a front strut-tower brace and 17-inch wheels, while NR-A used height-adjustable Bilstein dampers and a simpler equipment package. The 2008 revision lowered the front suspension roll-centre height and revised suspension tuning. Later cars received further steering and braking calibration changes. Original differential, damper and wheel equipment should be checked carefully because suspension modifications are common on Japanese NC Roadsters.

Transmission: Five-speed manual, six-speed manual and electronically controlled six-speed Activematic automatic transmissions were offered across the Japanese NC range, depending on year and grade. The original Roadster and later S used a five-speed manual, while RS and RS RHT were equipped with a six-speed manual. Early VS and VS RHT specifications offered six-speed manual and automatic choices, but the post-2008 VS RHT used the six-speed automatic. S RHT was also automatic-only. Mazda revised the six-speed manual gearbox synchronisers in December 2008, improving shift operation, while the automatic gained Direct Mode and Active Adaptive Shift functions. Manual gearboxes should be checked for worn synchronisers and clutch operation, while RHT automatics require examination of shift response and the steering-wheel controls.

Notable features: Japanese-market 2.0-litre MZR engine, NCEC chassis, double-wishbone front suspension, multi-link rear suspension, six-speed manual and automatic transmission options, factory torque-sensing limited-slip differentials, Bilstein suspension on sporting grades, Power Retractable Hard Top from August 2006, 12-second electric roof operation, NC2 facelift in December 2008, revised engine internals and higher manual rev limit, 2012 active bonnet system, optional BOSE audio, factory Recaro seating packages, MazdaSpeed M'z Tune, Black Tuned and Japanese 25th Anniversary Model.


What the Japanese chassis codes tell you about a Roadster

All Japanese third-generation Mazda Roadsters use the NCEC chassis designation. Unlike the NA and NB generations, where different chassis codes identified different engine sizes, the NC was offered in Japan exclusively with the 1,998 cc LF-VE petrol engine. The NCEC code therefore does not establish whether a car has a manual or automatic gearbox, a fabric roof or an electrically operated hardtop.

The earliest Japanese NC models carried the CBA-NCEC regulatory designation. These include the original Roadster, RS and VS soft-tops, along with the first RHT models introduced in August 2006. Mazda later moved to the DBA-NCEC designation following changes to emissions certification and vehicle specifications. Both use the same basic NCEC platform, so the CBA or DBA prefix should not be interpreted as an engine-size designation.

Roadster enthusiasts commonly divide the NC into three main development periods. NC1 covers the original 2005–2008 design, with the first 2.0-litre engine calibration, rounded front bumper and earlier suspension settings. NC2 refers to the December 2008 facelift, identified by its revised five-point grille, altered headlights and mechanical changes to the manual engine, suspension and gearbox. 

NC3 describes the July 2012 revision, which introduced another front-end design, revised control systems and the active bonnet.

These descriptions are useful when searching Japanese listings, but NC1, NC2 and NC3 are not separate factory chassis codes. A 2006 RS, a 2010 RS and a 2013 RS can all be identified as NCEC despite having different engine and chassis specifications. The same applies to RHT models, where the roof mechanism and equipment changed during production without introducing another chassis family.

The transmission and roof arrangement are especially important. Early Roadster RHT models were sold with five-speed manual or six-speed automatic gearboxes, while RS RHT used a six-speed manual. VS RHT was initially available with both six-speed manual and automatic transmissions. After the December 2008 revision, the range was simplified, with S RHT and VS RHT using the six-speed automatic and RS RHT retaining the six-speed manual.

Japanese auction sheets and retail advertisements should therefore be checked for the original grade, production month, gearbox and roof configuration together. The NCEC designation confirms the third-generation platform, but it does not distinguish a basic S automatic RHT from a six-speed RS RHT with Bilstein suspension, limited-slip differential and different factory equipment.


Japanese Mazda Roadster NC series grades

Mazda launched the Japanese NC Roadster with three principal grades: Roadster, RS and VS. Every model used the same 2.0-litre MZR petrol engine, but the transmission, suspension and interior equipment differed. Roadster provided the five-speed manual or six-speed automatic, RS combined a six-speed manual with Bilstein dampers and a limited-slip differential, and VS added leather upholstery with a choice of manual or automatic transmission.

The range expanded in 2006 with NR-A and the Power Retractable Hard Top. The NR-A used a five-speed manual, height-adjustable Bilstein dampers and equipment intended for Japanese road-registered competition. The RHT brought a different roof mechanism without changing the basic engine, and was available in standard, RS and VS specifications. An RS RHT retained the six-speed manual and sporting chassis equipment, while VS RHT offered a more extensively equipped interior.

The December 2008 facelift reorganised the range into S, NR-A and RS soft-tops, together with S RHT, RS RHT and VS RHT. The regular VS soft-top was discontinued, and the remaining RHT grades adopted clearer manual and automatic transmission combinations. 

The revised RS and RS RHT continued with 17-inch wheels and Bilstein suspension, while the S models used a simpler equipment specification.

Special editions introduced different factory combinations of mechanical and interior equipment. MazdaSpeed M'z Tune received additional engine and suspension tuning, while Blaze Edition and Prestige Edition concentrated on leather upholstery, exterior finishes and BBS wheels. The 20th Anniversary Model added Recaro seating, Black Tuned introduced contrasting black RHT components, and the 25th Anniversary Model received specially selected engine components and an individually numbered factory specification.

The distinctions are substantial enough that the grade name should be checked before comparing Japanese prices. An early VS six-speed manual, a later VS RHT automatic and an RS RHT manual offer different transmissions and equipment, even though all three share the NCEC chassis and 2.0-litre engine family.


Roadster

Roadster was the original base grade when Mazda introduced the NC in August 2005. It used the 1,998 cc LF-VE engine, producing 170 PS with a five-speed manual or 166 PS with the six-speed Activematic automatic. Standard equipment included 16-inch alloy wheels with 205/50R16 tyres, black fabric seats, a manual fabric roof with a glass rear window, power steering, electric windows and front airbags. Mazda also fitted an aluminium boot lid to help reduce weight.

The Roadster did not receive the RS's 17-inch wheels, Bilstein dampers or factory torque-sensing limited-slip differential. Its five-speed gearbox and conventional suspension distinguished it from the sporting grade, while BOSE audio and other equipment could be specified separately. The Roadster name continued until the December 2008 facelift, when the basic soft-top model was renamed S. An original 2005–2008 Roadster therefore has the earlier body styling and engine calibration, rather than the later NC2 specification.


Roadster RHT

The Roadster RHT joined the Japanese range in August 2006, using Mazda's electrically operated Power Retractable Hard Top. The roof consisted of rigid panels that folded into a dedicated compartment behind the seats in approximately 12 seconds. Unlike a conventional folding hardtop that occupies much of the luggage compartment, the NC's mechanism preserved the 150-litre boot. The standard Roadster RHT was available with a five-speed manual or six-speed Activematic automatic. The RS RHT used a six-speed manual, while the VS RHT offered either a six-speed manual or six-speed automatic. All four configurations used Mazda's naturally aspirated 2.0-litre LF-VE engine.

The basic RHT retained 16-inch wheels and a simpler interior than RS RHT or VS RHT. Its roof mechanism added weight, and Mazda revised the suspension settings to accommodate the different body and roof arrangement. Chrome exterior detailing also distinguished it from the fabric-roof version. The Roadster RHT name was replaced by S RHT in December 2008, when the basic hardtop specification became automatic-only. Early manual Roadster RHT cars should therefore not be confused with later S RHT models.


NR-A

Mazda introduced the NC NR-A in April 2006 as a road-registerable model developed for the Japanese Roadster Party Race championship. It was based on the standard five-speed manual Roadster, retaining the 170 PS LF-VE engine. Mazda fitted height-adjustable Bilstein dampers, a torque-sensing limited-slip differential, a front strut-tower brace, aluminium pedals and a leather-covered steering wheel. The original specification used 16-inch steel wheels, with alloy wheels available as a factory option.

NR-A buyers could also purchase competition equipment through Mazda dealers, including a roll-bar set, roll-bar protection and towing hooks. These items were not fitted to every road-going NR-A. The grade continued through the 2008 and 2012 revisions, receiving the corresponding engine and body updates while retaining its competition-oriented specification. Japanese examples should be checked for previous circuit use, modifications to the suspension and differential, and the condition of the original safety equipment. A standard S fitted with coilovers or a roll bar is not automatically an NR-A.


RS

RS was the main sporting grade of the Japanese NC range from August 2005. It used the 170 PS 2.0-litre engine with a six-speed manual gearbox, Bilstein dampers, a torque-sensing limited-slip differential, front strut-tower reinforcement and 17-inch alloy wheels with 205/45R17 tyres. The RS also received additional chassis equipment and a black fabric interior, while leather seating and BOSE audio were available through factory options.

The December 2008 revision brought significant mechanical changes to RS. Mazda revised the engine internals, increased the manual rev limit to 7,500 rpm, improved gearbox synchronisers and changed the front suspension geometry. Power remained 170 PS but was now produced at 7,000 rpm. The 2012 update introduced further throttle and braking revisions, along with the active bonnet. These changes make the production period important when comparing RS examples. An early NC1 RS and a later NC3 RS use the same basic engine and gearbox arrangement but have different chassis tuning, safety equipment and front-end styling.


RS RHT

RS RHT arrived in August 2006, combining the six-speed manual RS drivetrain with the electrically operated retractable hardtop. It used the 170 PS LF-VE engine, torque-sensing limited-slip differential, Bilstein dampers, 17-inch wheels and front suspension reinforcement associated with the sporting grade. The roof folded behind the seats without reducing luggage space, while the suspension was calibrated for the additional weight of the hardtop mechanism.

The RS RHT continued through the December 2008 and July 2012 updates. Later models received the revised engine, improved gearbox, updated suspension settings and additional safety equipment. Mazda also offered optional Recaro leather-and-Alcantara seats, BOSE audio and other equipment on applicable production years. An RS RHT should not be confused with an S RHT, which used an automatic transmission and simpler chassis equipment. For a Japanese import, the operation of the folding roof, original Bilstein dampers, differential condition and six-speed gearbox deserve particular attention.


S

Mazda introduced the S grade in December 2008 as the replacement for the original Roadster soft-top. It used the revised 2.0-litre MZR petrol engine producing 170 PS at 7,000 rpm, combined exclusively with a five-speed manual gearbox. The S retained 16-inch alloy wheels, black fabric upholstery and a manually operated soft top. Unlike the RS, it did not receive Bilstein suspension, 17-inch wheels or the complete sporting chassis package.

The S also received the improvements introduced during the facelift, including the redesigned front bumper, updated headlights, revised instrument panel and altered suspension settings. Further changes arrived in July 2012, when Mazda updated the exterior, throttle response and braking assistance and fitted the active bonnet. The S remained the simplest regular Japanese NC soft-top during the final production years. Its five-speed gearbox and less specialised suspension are the principal differences from RS, making original equipment more useful for identification than exterior appearance alone.


S RHT

S RHT joined the revised Japanese range in December 2008, replacing the original Roadster RHT specification. It retained the electrically operated folding hardtop but was offered exclusively with the six-speed Activematic automatic transmission. The revised 2.0-litre engine produced 162 PS at 6,700 rpm, compared with 170 PS in the contemporary manual models. Standard equipment included 16-inch alloy wheels, fabric upholstery and the electric roof mechanism.

Mazda revised the automatic transmission for the 2008 facelift, introducing Direct Mode and Active Adaptive Shift functions to improve gear selection during manual and automatic driving. The S RHT subsequently received the 2012 front-end update, revised interior finishes and active bonnet. It did not share the RS RHT's six-speed manual gearbox, Bilstein suspension or complete sporting equipment package. Japanese listings describing an S RHT should therefore identify an automatic model, while a five-speed manual RHT belongs to the earlier Roadster RHT specification.


VS

VS was the higher-equipped soft-top NC at the August 2005 launch. It used the 2.0-litre LF-VE engine with either a six-speed manual producing 170 PS or a six-speed automatic producing 166 PS. Mazda fitted saddle-tan leather upholstery, coordinated interior trim and a fabric roof, with additional comfort equipment compared with the standard Roadster. The leather interior distinguished VS from the RS's black fabric specification, while the factory suspension and wheel arrangement remained different from the sporting grade.

The original VS also offered optional BOSE audio and other convenience equipment. Its six-speed manual version is particularly notable because later Japanese production concentrated the VS specification on the automatic RHT. Mazda removed the regular VS soft-top during the December 2008 range reorganisation. A Japanese advertisement for a 2010 or 2013 VS soft-top should therefore be checked carefully, as the seller may be describing a different grade with factory or aftermarket leather seats. Original saddle-tan upholstery, gearbox type and production date are important identification details.


VS RHT

VS RHT was introduced in August 2006 as the more extensively equipped version of the Power Retractable Hard Top. Early Japanese examples were available with either a six-speed manual or six-speed automatic, using the 2.0-litre engine. The grade included saddle-tan leather upholstery, additional chrome exterior details and the electrically operated roof. A Premium Package could also be specified, adding chrome-finished 17-inch alloy wheels and other equipment.

The December 2008 facelift changed the VS RHT specification considerably. Mazda discontinued the six-speed manual version, leaving the 162 PS six-speed automatic as the sole transmission. The interior moved to Havana Brown leather, with heated front seats and additional convenience equipment. Optional Recaro leather-and-Alcantara seats and other equipment were also offered on applicable models. The 2012 revision introduced a new tan-and-black leather combination and updated exterior trim. An early VS RHT manual and a late NC3 VS RHT automatic therefore have different drivetrains, interior finishes and factory equipment despite sharing the same grade name.


3rd Generation Limited

Mazda introduced the 3rd Generation Limited alongside the NC's Japanese launch in August 2005. The edition was restricted to 500 cars for Japan, forming part of a worldwide allocation of 3,500 vehicles. It was based on the 170 PS RS with a six-speed manual gearbox, but received Velocity Red Mica paint, dedicated 17-inch alloy wheels, chrome exterior fittings and red leather upholstery. The interior also included heated front seats, matching red door trim and aluminium-look decorative details.

The 3rd Generation Limited retained the RS's sporting chassis equipment, including Bilstein dampers and a torque-sensing limited-slip differential. Mazda did not introduce a separate higher-output engine for the edition. Its main distinctions are the original factory colour, leather interior and dedicated exterior equipment. Japanese listings should be checked for the correct seats, wheels, chrome windscreen surround and original documentation, particularly where a car has received aftermarket bodywork or replacement interior components.


Japan Car of the Year Award Commemorative Model

Mazda announced the Japan Car of the Year Award Commemorative Model in December 2005, with Japanese sales beginning in January 2006. The edition celebrated the NC winning the 2005–2006 Japan Car of the Year award. Mazda offered two mechanical specifications: the RS-based six-speed manual with 170 PS and the VS-based six-speed automatic with 166 PS. Both retained the naturally aspirated 2.0-litre MZR engine.

The manual version used Brilliant Black paint with red leather seats and matching door trim, while the automatic combined Copper Red Mica with a black leather interior. Both received heated bucket seats, a black fabric roof, BOSE seven-speaker audio, advanced keyless entry, front fog lamps and a commemorative decal on the passenger-side front wing. The edition did not receive a separate engine or suspension tune. Its original colour combination, leather upholstery, factory audio equipment and commemorative identification distinguish it from an ordinary RS or VS.


Blaze Edition

The Blaze Edition was introduced in December 2006 as a specially equipped soft-top Roadster. Mazda offered it in two configurations: RS with a six-speed manual gearbox and VS with a six-speed automatic. The manual retained the 170 PS 2.0-litre engine, while the automatic produced 166 PS. Both received dedicated 17-inch forged BBS alloy wheels, chrome exterior trim, clear indicator lenses and a black fabric roof.

Mazda offered Radiant Ebony Mica, a dedicated deep wine-red colour, together with Highland Green Mica. The cabin featured sand-beige leather upholstery, matching door trim, aluminium-finish decorative panels and beige stitching on the leather-covered controls. The automatic also received larger wheels and a front strut-tower brace as part of the edition's equipment. Blaze Edition was not a higher-output performance model. Its BBS wheels, chrome fittings, leather interior and original paint are the main features separating it from a standard 2006 RS or VS.


Blaze Edition RHT

The Blaze Edition RHT followed in April 2007, extending the same factory specification to the electrically operated hardtop. Mazda used the RS RHT with six-speed manual transmission and VS RHT with six-speed automatic as the base models. The engine outputs remained 170 PS and 166 PS respectively. Both retained the retractable roof, which folded behind the seats without reducing the boot's luggage capacity.

Like the soft-top Blaze Edition, the RHT received forged 17-inch BBS wheels, chrome and clear exterior components, sand-beige leather upholstery and dedicated interior trim. Radiant Ebony Mica and Highland Green Mica were available. The RHT body already included certain chrome fittings that were added separately to the soft-top edition, but the special wheels and interior specification remained distinctive. Buyers should verify the original roof mechanism, BBS wheels and leather equipment, as a standard RS RHT or VS RHT can look similar after cosmetic modifications.


Prestige Edition

Mazda introduced the Prestige Edition in October 2007 as a higher-equipped version of the NC Power Retractable Hard Top. It was offered with the RS RHT six-speed manual and VS RHT six-speed automatic, both retaining the standard 2.0-litre petrol engine outputs. Mazda fitted dedicated 17-inch forged BBS alloy wheels, black leather bucket seats with grey stitching, five-stage heated seats, stainless-steel sill plates and front fog lamps.

The driver's seat received a mechanical height-adjustment mechanism allowing the seating position to be raised by approximately 30 mm. Automatic versions also gained a front strut-tower brace and Dynamic Stability Control as part of the edition's equipment. Unlike Blaze Edition, Prestige Edition could be ordered in the regular range of seven exterior colours. Its defining equipment was concentrated on the seats, forged wheels and interior appointments rather than a special engine or body colour. Original BBS wheels, black leather upholstery and the factory seat-height adjustment are useful identifying details.


MazdaSpeed M'z Tune

Mazda E&T introduced the MazdaSpeed M'z Tune in April 2007 as a complete factory-associated conversion based on the NC RS soft-top. It retained the 1,998 cc naturally aspirated MZR engine and six-speed manual gearbox, but received dedicated engine-management calibration, intake modifications, a lighter flywheel, a lower-restriction catalytic converter and a MazdaSpeed sports exhaust. Mazda E&T also fitted height-adjustable Bilstein dampers, revised springs, MazdaSpeed brake pads and aerodynamic body components.

The M'z Tune was finished in Moist Silver Metallic with a black interior and dedicated 3D-net sports seats. Its exterior equipment included a revised front bumper, side skirts and rear aerodynamic components, while the suspension and drivetrain modifications were developed as a coordinated package. The model's technical documentation retained the standard 170 PS reference output rather than establishing a separately certified higher maximum power figure. A genuine M'z Tune should be identified through Mazda E&T documentation and its original equipment, rather than MazdaSpeed badges or aftermarket body parts fitted to a conventional RS.


20th Anniversary Model

Mazda introduced the Japanese 20th Anniversary Model in July 2009, marking two decades since the original Eunos Roadster. Two versions were available: an RS-based fabric-roof model with a six-speed manual and a VS RHT-based model with a six-speed automatic. Both used the revised 2.0-litre engine, producing 170 PS in manual form and 162 PS with the automatic. Crystal White Pearl Mica was the sole factory exterior colour.

The edition received dedicated Recaro bucket seats with black Alcantara and red leather upholstery, 20th Anniversary badges on the front wings and clear front fog lamps. The soft-top also received heated seats and additional padded interior trim, while the RHT gained 17-inch wheels and a front strut-tower brace. The special seating and colour combination distinguish the anniversary model from an ordinary RS or VS RHT. The manual and automatic versions also retain their different base chassis specifications, so the edition name alone does not establish which drivetrain is fitted.


Black Tuned

Mazda introduced Black Tuned in October 2011, using the RS RHT six-speed manual and VS RHT six-speed automatic as its mechanical foundations. Both versions retained their regular 2.0-litre engine outputs of 170 PS and 162 PS respectively. The most recognisable feature was the Brilliant Black retractable hardtop, accompanied by black exterior mirrors, black grille details and gunmetal-finished 17-inch alloy wheels.

Three body colours were offered: Spirited Green Metallic, Velocity Red Mica and Crystal White Pearl Mica. The interior featured black leather seats with sand-coloured stitching, matching door panels, piano-black dashboard trim and leather-covered controls. BOSE audio with seven speakers was also included. Black Tuned was not a suspension or engine upgrade over the corresponding RS RHT or VS RHT. The original contrasting roof colour, gunmetal wheels and sand-stitched interior are the details that distinguish it from a standard RHT fitted with black aftermarket accessories.


25th Anniversary Model

Mazda announced the Japanese 25th Anniversary Model in May 2014, restricting domestic sales to just 25 cars. It was based on the RS RHT with a six-speed manual gearbox and electrically operated roof. Soul Red Premium Metallic paint was combined with a Brilliant Black roof, windscreen pillars and exterior mirrors. The interior received off-white leather seats and matching door trim with red stitching, together with a hand-finished decorative dashboard panel.

Mazda also selected the pistons, connecting rods and flywheel components for improved balance and engine response. The model retained the naturally aspirated 2.0-litre engine rather than introducing a new powertrain. Additional equipment included dark-gunmetal 17-inch wheels, heated seats, anniversary identification, numbered badges and dedicated stainless-steel sill plates. Japanese cars were allocated through an online reservation process, with an original list price of ¥3,250,000. Given the 25-car domestic allocation, a genuine example requires particularly careful verification of its identification number, original paint, interior and supporting Mazda documentation.

Mazda Roadster ND series

Mazda Roadster ND series (May 2015 – present)


Mazda launched the fourth-generation Roadster in Japan on 21 May 2015, returning to a smaller and lighter body after the larger NC. The new ND measured 3,915 mm long, 80 mm shorter than its predecessor, with a 2,310 mm wheelbase and a kerb weight starting at 990 kg. Mazda achieved the reduction through a redesigned body structure, increased use of aluminium and high-tensile steel, and a compact 1.5-litre SKYACTIV-G petrol engine positioned behind the front axle. The engine produced 131 PS at 7,000 rpm and 150 Nm at 4,800 rpm, driving the rear wheels through a newly developed six-speed manual or a six-speed automatic on selected grades.

The original Japanese line-up consisted of S, S Special Package and S Leather Package. S was the lightest version, using a six-speed manual, 16-inch wheels and a relatively simple interior. S Special Package added Mazda Connect infotainment and additional convenience equipment, while S Leather Package introduced leather upholstery, heated seats and a nine-speaker Bose audio system. Mazda expanded the range in October 2015 with NR-A, developed for Japanese one-make racing, and RS, equipped with Bilstein dampers, Recaro seats and additional chassis reinforcement. The ND retained double-wishbone front suspension and a multi-link rear axle, but Mazda redesigned the geometry, electric power steering and suspension mounting arrangements.

December 2016 brought the Japanese-market Roadster RF, combining a 2.0-litre SKYACTIV-G engine with an electrically operated retractable fastback roof. The original RF produced 158 PS and 200 Nm, increasing to 184 PS and 205 Nm following the July 2018 engine revision. The ordinary Japanese ND soft-top continued using the 1.5-litre engine, which received revised combustion and calibration settings in 2018, raising output to 132 PS. Mazda also introduced telescopic steering adjustment and expanded i-ACTIVSENSE safety equipment during the same update. Unlike the NC's fully folding hardtop, the RF retains its rear roof pillars when the centre roof section retracts.

Mazda continued developing the Japanese soft-top range through a series of mechanical revisions and special editions. Red Top, Caramel Top and Silver Top introduced different fabric roof colours and interior specifications, while the 2019 30th Anniversary Model received Racing Orange paint and dedicated Brembo brakes. 

December 2021 brought the 990S, which combined the lightweight S specification with forged RAYS wheels, Brembo brakes and dedicated suspension tuning. Mazda also introduced Kinematic Posture Control (KPC), a system that applies a small amount of braking force to the inside rear wheel during cornering to reduce body roll without adding mechanical components to the suspension.

The substantial January 2024 update introduced the ND5RE designation for the regular 1.5-litre soft-top. Mazda increased output to 136 PS, recalibrated the electric power steering and introduced an asymmetric limited-slip differential on manual grades other than S. The new differential uses different locking characteristics during acceleration and deceleration, improving stability when entering a corner under braking. The revised range also received an 8.8-inch Mazda Connect display, updated LED lighting, additional driver-assistance functions and DSC-TRACK stability-control settings on manual models. S Leather Package V Selection joined the Japanese line-up with a beige fabric roof and Sports Tan Nappa leather interior.

The next major development arrived with the Mazda Spirit Racing Roadster and Roadster 12R, announced for Japanese sale in October 2025 and introduced in January 2026. Both use a 2.0-litre engine beneath the ND soft-top body, a combination previously unavailable in the regular Japanese Roadster range. The standard Spirit Racing model produces 184 PS, while the 12R develops 200 PS with revised intake ports, camshafts, exhaust components and engine internals. Production allocations were set at 2,200 and 200 vehicles respectively. Mazda followed these with the PS special edition in September 2026, combining the regular 1.5-litre engine with RAYS wheels, Brembo brakes, Bilstein dampers and a grey fabric roof.

A Japanese ND5RC S Special Package, 990S, RS and Mazda Spirit Racing Roadster can have substantially different factory equipment. The differences include engine output, differential specification, brakes, wheels and suspension. 

 The original Japanese grade and production month are particularly relevant when comparing cars for import to Ireland, especially where previous owners have fitted aftermarket wheels, coilovers, exhaust systems or additional aerodynamic components.


Current Japanese retail price: Around ¥1.13 million–¥6.05 million (approximately €6,500–€34,600 / $7,100–$38,000). Current CarSensor listings for the Japanese ND Roadster show an average asking price of approximately ¥2.78 million (€15,900 / $17,500). Early 2015–2017 Roadsters with higher mileage or documented repairs generally appear at lower asking prices. Later S Special Package and RS models, particularly original low-mileage examples, tend to cost more. The 990S, 30th Anniversary and 35th Anniversary models can attract higher asking prices due to their factory specifications. These figures represent the advertised used-car market rather than a guaranteed valuation of every edition. The exceptionally rare Spirit Racing 12R sits outside ordinary used-car comparisons; Mazda's original Japanese manufacturer price was ¥7,612,000, compared with ¥5,265,700 for the standard Spirit Racing Roadster. Japanese retail prices do not include Irish import charges.

Import cost considerations: The ND's Japanese retail asking price is only the starting point for an Irish landed-cost calculation. Export handling, inland Japanese transport, shipping, marine insurance, customs clearance, applicable duty, 23% Irish VAT, VRT and registration expenses must also be considered. The exact vehicle's documented CO₂ and NOx emissions are relevant to Irish VRT, while preferential customs duty treatment under the EU-Japan Economic Partnership Agreement depends on satisfying the applicable origin and documentation requirements. A 1.5-litre S and a 2.0-litre Spirit Racing model should not be assumed to have the same registration cost simply because both are ND soft-tops. Japanese domestic-market infotainment, radio frequencies and connected services also need checking before import, particularly on the early Mazda Connect systems.

Engine output:

  • P5-VP 1.5-litre SKYACTIV-G petrol, May 2015 launch: 131 PS at 7,000 rpm / 150 Nm at 4,800 rpm
  • Revised P5-VP 1.5-litre SKYACTIV-G petrol, July 2018: 132 PS at 7,000 rpm / 152 Nm at 4,500 rpm
  • Revised P5-VP 1.5-litre SKYACTIV-G petrol, January 2024 onwards: 136 PS at 7,000 rpm / 152 Nm at 4,500 rpm
  • PE-VPR 2.0-litre SKYACTIV-G petrol, original Roadster RF from December 2016: 158 PS at 6,000 rpm / 200 Nm at 4,600 rpm
  • Revised 2.0-litre SKYACTIV-G petrol, Roadster RF from July 2018: 184 PS at 7,000 rpm / 205 Nm at 4,000 rpm
  • Mazda Spirit Racing Roadster 2.0-litre SKYACTIV-G: 184 PS at 7,000 rpm / 205 Nm at 4,000 rpm
  • Mazda Spirit Racing Roadster 12R 2.0-litre SKYACTIV-G: 200 PS at 7,200 rpm / 215 Nm at 4,700 rpm

Note: The 1.5-litre engine received separate revisions in 2018 and 2024. The 2.0-litre Spirit Racing cars are Japanese-market soft-tops, not RF conversions. Mazda's October 2025 figures for the Spirit Racing models were published as manufacturer measurements or development targets, so they should be distinguished from the regular production engine ratings.

Engine: The ordinary Japanese ND soft-top uses Mazda's 1,496 cc P5-series SKYACTIV-G four-cylinder engine, with direct petrol injection, twin overhead camshafts, variable valve timing and a timing chain. The engine is mounted longitudinally behind the front axle, with a lightweight aluminium block and a high compression ratio. Early models produced 131 PS, rising to 132 PS in 2018 and 136 PS following the 2024 revision. Unlike the earlier NB's naturally aspirated engines, the ND was developed around direct injection and more extensive electronic engine management. The Roadster RF uses the 1,997 cc PE-series SKYACTIV-G engine, while the 2026 Spirit Racing soft-tops use specially calibrated versions of the 2.0-litre engine. The 12R receives additional mechanical changes, including revised intake-port geometry, camshafts, exhaust manifold and a single-mass flywheel.

Best for: Buyers interested in a modern Japanese Roadster with a six-speed manual gearbox, low kerb weight and a choice of basic or more specialised factory specifications. The S offers the simplest equipment and lowest weight, while S Special Package adds infotainment and convenience features. RS and NR-A provide different suspension packages, with NR-A intended for road-registerable competition use. The 990S offers a lightweight factory combination with upgraded brakes and wheels, while late ND5RE models introduce revised steering and differential control. Spirit Racing models are suited to buyers specifically seeking a Japanese-market 2.0-litre soft-top.

Body style: Two-door, two-seat rear-wheel-drive roadster with a manually folding fabric roof, aluminium bonnet and separate boot. The Japanese soft-top measures 3,915 mm long and 1,735 mm wide, with a 2,310 mm wheelbase. Height varies slightly by grade and suspension specification, starting around 1,235 mm. The ND has a compact cabin, close-set seats, short gear lever and storage compartments behind the occupants. The original S manual weighed 990 kg, while additional audio, safety and comfort equipment increases weight on other grades. The separate Roadster RF uses an electrically retractable roof with fixed rear buttresses and has a different weight and storage arrangement.

Drive: Front-engine, rear-wheel drive throughout the Japanese ND range. Mazda uses double-wishbone front suspension, independent multi-link rear suspension and electrically assisted rack-and-pinion steering. Limited-slip differential equipment depends on production year and grade. Early S models use a conventional differential, while selected manual grades received a torque-sensing limited-slip differential. RS and NR-A incorporate Bilstein suspension equipment, although NR-A uses height-adjustable dampers for competition preparation. The 990S has its own damper and spring calibration, while the 2024 revision introduced the asymmetric limited-slip differential on applicable manual models. Kinematic Posture Control became standard across the Japanese Roadster range from the December 2021 revision.

Transmission: Six-speed SKYACTIV-MT manual throughout the Japanese 1.5-litre soft-top range, with six-speed electronically controlled automatic transmission available on S Special Package, S Leather Package and selected special editions. The basic S, NR-A, RS, 990S and Spirit Racing models use manual gearboxes. Mazda designed the ND manual with a direct-drive sixth gear, rather than the overdrive arrangement common in many other six-speed transmissions. The automatic includes manual-shift operation and, on applicable models, Drive Selection. The December 2021 KPC system and 2024 steering revisions apply independently of the transmission, but the asymmetric LSD is restricted to qualifying manual grades.

Notable features: Lightweight ND body with extensive aluminium construction, 1.5-litre SKYACTIV-G petrol engine, 990 kg original S specification, six-speed SKYACTIV-MT, optional Mazda Connect and Bose nine-speaker audio, Recaro seats and Bilstein dampers on RS, NR-A competition equipment, Roadster RF introduced in December 2016, telescopic steering from 2018, RAYS forged wheels and Brembo brakes on selected models, Kinematic Posture Control from 2021, 990S special edition, ND5RE chassis revision in 2024, asymmetric limited-slip differential, DSC-TRACK, 8.8-inch Mazda Connect display, Mazda Spirit Racing 184 PS and 12R 200 PS engines, and the PS special edition introduced in 2026.


What the Japanese chassis codes tell you about a Roadster

The Japanese fourth-generation Roadster introduced a different chassis-code arrangement from the earlier cars. ND5RC identifies the original 1.5-litre soft-top, introduced in May 2015. It covers the 131 PS launch models, the revised 132 PS cars from July 2018 and later special editions such as the 990S. The same chassis code can therefore appear on cars with different engine calibrations, safety equipment and suspension specifications.

ND5RE replaced ND5RC with the substantial January 2024 revision. These cars use the revised 136 PS SKYACTIV-G 1.5 engine and updated electronic systems. The changes also include a redesigned steering rack, revised electric power-steering calibration and an asymmetric limited-slip differential on applicable manual grades. The S remains an exception to the new differential specification, while qualifying higher grades received the revised unit.

The two principal Roadster RF codes are NDERC for the original retractable-fastback model and NDERE for the version introduced with the January 2024 revision. The RF uses a 1,997 cc SKYACTIV-G engine rather than the regular Japanese soft-top's 1,496 cc unit. Early NDERC cars produced 158 PS, increasing to 184 PS after the July 2018 engine update. Both RF generations were available with manual or automatic transmissions, depending on grade.

There is an unusual exception to the normal engine and body relationship. The 2026 Mazda Spirit Racing Roadster and Roadster 12R are soft-top models with 2.0-litre engines, but use the NDERE designation. Consequently, NDERE alone should no longer be treated as proof that a Japanese Roadster has the RF retractable roof. The 184 PS Spirit Racing and 200 PS 12R must be identified by their factory grade, engine specification and body configuration.

Japanese regulatory prefixes also changed during production. Earlier ND5RC and NDERC models appear with DBA designations, while later cars use 5BA classifications. These prefixes reflect regulatory and certification changes, not separate Roadster generations.

Enthusiasts sometimes use ND1, ND2 and ND3 to describe the development periods, with ND3 commonly referring to the 2024 revision. Those names are convenient shorthand, but they are not replacements for Mazda's Japanese chassis designations.

A 2017 ND5RC RS, a 2022 ND5RC 990S and a 2025 ND5RE RS are all fourth-generation 1.5-litre Roadsters, yet their steering systems, differential equipment, brakes and factory electronics differ. For Japanese auction and retail searches, the production month and original grade establish which specification is fitted before the seller's descriptions of aftermarket modifications are considered.


Japanese Mazda Roadster ND series grades

The Japanese ND range began with three grades in May 2015. S was the 990 kg manual model, with simpler equipment and a conventional rear differential. S Special Package added infotainment, automatic climate control and, on manual cars, a Torsen limited-slip differential and additional chassis equipment. S Leather Package used the same 1.5-litre engine but included leather seats, heated front seats and Bose audio. Automatic transmission was available on both package grades, but not on S.

Mazda added the NR-A and RS in October 2015 for drivers wanting more specialised chassis equipment. NR-A was developed around Japanese road-registerable competition, with adjustable Bilstein dampers, enhanced cooling and larger brakes. RS received its own Bilstein suspension calibration, Recaro seats, a front strut-tower brace and an induction sound enhancer. Neither received a higher-output engine than the regular 1.5-litre Roadster.

The ND's special-edition programme took several different directions. Red Top, Caramel Top, Silver Top, Navy Top and Brown Top were developed around fabric roof colours and coordinated interiors. The 30th Anniversary, 990S and RS White Limited Selection received more substantial wheel, brake or suspension equipment, while the 100th and 35th Anniversary editions concentrated on commemorative details and exclusive colours.

Mazda's January 2024 update reorganised the later range around S, S Special Package, S Leather Package, S Leather Package V Selection, RS and NR-A. The lightweight 990S and several earlier special editions had been discontinued. The revised grades gained updated electronics, while manual specifications other than S received the new asymmetric limited-slip differential.

The arrival of the Spirit Racing cars in 2026 changed the Japanese range further by introducing 2.0-litre soft-top models. The regular Spirit Racing Roadster and 12R have different engine outputs, seats and competition equipment, despite sharing their basic chassis and engine displacement. The PS special edition, introduced later in 2026, remained a 1.5-litre model but added upgraded braking and suspension components.

That leaves a broad spread of specifications within the ND generation. An early S manual, an automatic S Leather Package, an NR-A prepared for Party Race competition and a 12R with a 200 PS engine cannot be evaluated simply by comparing age and mileage. Their original mechanical equipment explains much of the difference between them.


S

S was the entry grade when Mazda launched the ND in May 2015, but it was also the model used to achieve the original 990 kg kerb weight. It came exclusively with the six-speed SKYACTIV-MT gearbox and 1.5-litre engine producing 131 PS. Mazda fitted 16-inch alloy wheels, black fabric seats, a manually operated roof and a basic audio display rather than the Mazda Connect screen installed in the higher grades. The S omitted the rear anti-roll bar, tunnel brace and Torsen limited-slip differential supplied on selected more expensive manual models.

The mechanical specification changed as Mazda revised the ND. Output increased to 132 PS in 2018 and 136 PS in January 2024, while safety and electronic equipment improved during production. However, the S continued without the factory limited-slip differential introduced on other manual grades in 2024. It is therefore not mechanically identical to an S Special Package with the same engine and gearbox. Early S models also lack some of the infotainment and safety functions fitted to later cars, which is relevant when comparing a lightweight 2015 example with a more recent ND5RE.


S Special Package

S Special Package has been part of the Japanese Roadster range since May 2015, offering the choice of six-speed manual or six-speed automatic. From launch it included Mazda Connect with a seven-inch centre display, commander control and automatic climate control. Manual cars also received a Torsen limited-slip differential, rear stabiliser bar and transmission-tunnel reinforcement, making their drivetrain specification different from both S and the automatic S Special Package.

The grade received numerous equipment updates without changing its position in the range. December 2017 brought the availability of heated fabric seats, while the July 2018 revision added telescopic steering and expanded safety technology. Mazda Connect gained Apple CarPlay and Android Auto support with the 2019 update. From January 2024, the manual received the asymmetric limited-slip differential, alongside the 136 PS engine, revised steering and 8.8-inch display. A later S Special Package manual is consequently a very different specification from the first-generation ND5RC, particularly in its electronics and differential behaviour.


S Leather Package

The original S Leather Package was the highest regular Japanese ND grade at launch. Its equipment included black leather seats with red stitching, seat heating, a nine-speaker Bose sound system with headrest speakers, Mazda Connect and additional i-ACTIVSENSE driver-assistance functions. Buyers could order a six-speed manual or automatic. Manual versions included the Torsen differential and additional chassis components, while the automatic used its own transmission and differential arrangement.

Mazda revised the leather, interior finishes and electronics several times. The December 2017 update brought improvements to cabin materials and safety equipment, followed by a revised seat and trim presentation in 2019. The 2024 version uses the 136 PS engine and newer Mazda Connect system, with an asymmetric LSD on the manual. The leather upholstery is worth examining around the outer bolsters and headrests, particularly on Japanese cars that have spent long periods exposed to sunlight with the roof lowered. Bose speakers, seat heating and the infotainment controller should also be tested individually.


S Leather Package V Selection

Mazda introduced S Leather Package V Selection with the January 2024 update. It uses the same 1.5-litre 136 PS engine as the contemporary S Leather Package, with either a six-speed manual or automatic. The distinguishing equipment is a beige fabric roof, Sports Tan Nappa leather seats, matching tan trim across the dashboard and doors, body-coloured exterior mirrors and high-brightness 16-inch alloy wheels.

The V Selection was developed as a permanent grade rather than a short-production anniversary model. Its interior differs from the Pure White upholstery of the earlier White Selection, while the beige roof and tan leather give it a separate factory identity from the black-roofed S Leather Package. Manual examples also receive the 2024 asymmetric limited-slip differential. Mazda subsequently used the V Selection manual as the basis for the 35th Anniversary soft-top, so the latter shares its principal engine and transmission specification but has separate paint, interior and commemorative equipment.


NR-A

The ND NR-A went on sale in Japan on 15 October 2015, developed for drivers participating in the Roadster Party Race and other road-registerable motorsport events. The original 1.5-litre engine retained its 131 PS output, but Mazda fitted height-adjustable Bilstein dampers, a larger radiator, larger brakes and additional equipment to improve durability during circuit use. The grade was available only with a six-speed manual transmission. Its 2015 launch price was ¥2,646,000.

NR-A continued through the ND5RC and later ND5RE production periods, receiving the relevant engine and electronic updates. It is not simply an S Special Package with firmer dampers. Its cooling, brake and suspension specifications were selected for sustained circuit driving, and Japanese examples may have been used in organised competition. Some were fitted with roll cages, harnesses and other approved racing components through separate dealer or competition programmes. Those additions should not be assumed standard on every NR-A, and a car's competition history matters when assessing clutch, gearbox and differential wear.


RS

RS joined the ND range on 1 October 2015 with a factory chassis package that differed considerably from the original S grades. Mazda fitted Bilstein dampers, a front strut-tower brace, larger brakes and Recaro seats developed specifically for the Roadster. A six-speed manual was the only transmission, with a Torsen limited-slip differential and an induction sound enhancer that brought more intake noise into the cabin at higher engine speeds. The 1.5-litre engine retained the standard 131 PS output.

The RS remained an important part of the Japanese range through the 2018 and 2024 revisions. Mazda added revised engine calibration, safety equipment and steering improvements, while later versions received the asymmetric limited-slip differential and DSC-TRACK function. For the September 2026 update, RS gained further suspension and throttle-response revisions informed by the Spirit Racing programme. Although RS and NR-A both use Bilstein dampers, their equipment is not identical. NR-A concentrates on competition preparation, while RS includes Recaro seats, higher-grade audio equipment and a different suspension specification for road use.


Red Top

Red Top was announced in November 2017 and went on sale in Japan on 14 December, with orders accepted until 31 March 2018. Based on S Leather Package, it introduced a Dark Cherry fabric roof and Auburn Nappa leather upholstery. Body-coloured exterior mirrors and high-brightness 16-inch alloy wheels completed the specification. Buyers could choose a six-speed manual or automatic, both using the original 131 PS SKYACTIV-G 1.5 engine.

The red-brown leather extended across the seats and selected interior trim, giving Red Top a cabin quite different from the black leather fitted to the regular S Leather Package. The edition coincided with Mazda's first significant ND equipment revision, which introduced revised steering and rear suspension tuning, additional interior sound insulation and available adaptive LED headlights. Red Top did not receive a separate engine calibration or a dedicated performance suspension. It also predates the 2018 telescopic steering update, making the production period relevant when comparing it with later roof-colour editions.


Caramel Top

Caramel Top arrived in Japan on 26 July 2018, following Mazda's revision of the ND's 1.5-litre engine. It was based on the S Leather Package and featured a brown fabric roof, Sports Tan leather upholstery, body-coloured door mirrors and high-brightness 16-inch alloy wheels. Mazda retained the choice of six-speed manual or automatic transmission. Orders closed on 24 December 2018, making Caramel Top a short-lived catalogue specification rather than a permanent addition to the range.

The timing of its introduction is relevant because Caramel Top received the revised 132 PS engine, together with the telescopically adjustable steering column and expanded i-ACTIVSENSE equipment introduced that July. The Sports Tan leather and brown roof distinguish it from the earlier Red Top's Auburn interior and Dark Cherry fabric. Mazda later returned to a brown-roof specification with the 2022 Brown Top, although that edition used Terracotta Nappa leather and different interior finishes.


30th Anniversary Model

Mazda opened Japanese reservations for the 30th Anniversary Roadster in April 2019, celebrating the original model's 1989 introduction. The edition was finished exclusively in Racing Orange and offered in two body styles: a 1.5-litre RS-based soft-top with six-speed manual transmission, and a 2.0-litre Roadster RF based on RS manual or VS automatic specifications. Mazda planned 3,000 cars worldwide, with 150 allocated to Japan across both roof types. The Japanese launch prices ranged from ¥3,682,800 to ¥4,303,800.

Equipment included specially engraved RAYS ZE40 RS30 forged wheels, orange Brembo front brake calipers, matching Nissin rear calipers, Recaro seats with orange accents and Alcantara upholstery. Manual models received Bilstein dampers, while the nine-speaker Bose system and individually numbered anniversary badges completed the specification. Unlike the regular RS, the 30th Anniversary combined its dedicated wheel and brake equipment with a limited global production allocation. Japanese examples should be identified by their original Racing Orange paint and numbered anniversary equipment, rather than a conventional ND fitted with orange aftermarket components.


Silver Top

Silver Top joined the Japanese Roadster range on 5 December 2019, with orders accepted until 31 March 2020. Based on the S Leather Package, it introduced a grey fabric roof, body-coloured exterior mirrors and high-brightness 16-inch alloy wheels. The interior retained the S Leather Package's black leather upholstery, with perforated seat material and updated grey stitching introduced during the same production revision. The 132 PS 1.5-litre engine was available with either a six-speed manual or six-speed automatic gearbox.

Mazda's 2019 update also introduced Apple CarPlay and Android Auto compatibility, improvements to night-time pedestrian detection and an optional RAYS forged wheel and Brembo brake package for selected manual specifications. Those components were optional rather than standard Silver Top equipment. A Japanese listing showing a Silver Top with Brembo calipers may therefore be correctly factory-optioned, but not every example was supplied with them. The grey roof, wheel finish and leather interior establish the standard edition, while any additional brake or wheel package should be documented separately.


100th Anniversary Special Edition

Mazda introduced the 100th Anniversary Special Edition in Japan in 2020 to commemorate the company's establishment in 1920. The Roadster version was based on the 1.5-litre S Leather Package and became available from July, with orders accepted until March 2021. Mazda selected Snowflake White Pearl Mica paint, a Dark Cherry fabric roof and burgundy interior finishes, referencing the red-and-white colour scheme of its 1960 R360 Coupe. Both six-speed manual and automatic versions were offered, originally priced at ¥3,279,100 and ¥3,394,600 respectively.

Dedicated equipment included 100th Anniversary badges on the front wings, commemorative wheel-centre caps, embroidered headrests, burgundy carpeting and an anniversary key presented in a special case. The engine and suspension specification remained that of the contemporary S Leather Package, producing 132 PS. Mazda also offered a separate 2.0-litre Roadster RF 100th Anniversary model, so Japanese listings should distinguish between the soft-top and retractable-fastback versions. The edition's factory identification pieces and distinctive burgundy cabin are particularly relevant when establishing whether a car retains its original commemorative specification.


S Leather Package White Selection

S Leather Package White Selection joined the Japanese range in December 2020, introducing Pure White Nappa leather upholstery to the 1.5-litre soft-top. The seats received matching light-coloured finishes, contrasting with the darker dashboard and other cabin surfaces. Mazda retained the S Leather Package's nine-speaker Bose audio, heated seats, Mazda Connect and choice of six-speed manual or automatic transmission. The engine produced 132 PS, with no separate performance calibration for White Selection.

Unlike the limited-period RS White Limited Selection introduced at the same time, the S Leather Package White Selection did not include Brembo front brakes or RAYS forged wheels as standard. Its original Japanese prices were ¥3,209,800 for the manual and ¥3,325,300 for the automatic. The grade offered the Pure White leather interior without requiring the RS chassis package. Buyers should also distinguish it from the later S Leather Package V Selection, which introduced Sports Tan Nappa leather and a beige roof with the 2024 model revision.


RS White Limited Selection

The RS White Limited Selection was offered in Japan between 10 December 2020 and 31 March 2021, combining the six-speed manual RS with Pure White Nappa leather upholstery. Mazda replaced the standard RS seating arrangement with the dedicated white leather interior and fitted Brembo front brakes with four-piston calipers, RAYS forged 16-inch alloy wheels and the RS's Bilstein suspension. The 1.5-litre engine continued to produce 132 PS. Mazda priced the Japanese soft-top version at ¥3,615,700.

The edition was available for a fixed ordering period rather than being restricted to a specified production quantity. Its factory Brembo and RAYS equipment separates it mechanically from the regular S Leather Package White Selection, despite both using white leather. Mazda also offered an RS White Limited Selection in the Roadster RF range, fitted with BBS 17-inch forged wheels instead of the soft-top's RAYS wheels. That distinction matters when comparing Japanese listings, particularly as the RF also uses a different 2.0-litre engine and retractable roof arrangement.


990S

Mazda introduced the 990S in December 2021, developing a separate suspension and braking specification around the lightweight S manual. The name refers to its 990 kg kerb weight. Equipment included forged 16-inch RAYS ZE40 RS wheels, saving approximately 3.2 kg across the set, Brembo front brakes with black four-piston calipers and blue lettering, and larger rear brake components. Mazda also recalibrated the dampers, coil springs, electric power steering and engine response specifically for the 990S. The 1.5-litre SKYACTIV-G engine continued to produce 132 PS, with a six-speed manual gearbox.

Unlike the higher-grade manual Roadsters, the 990S retained an open rear differential and did not have a rear anti-roll bar. Mazda also introduced Kinematic Posture Control during the same update, using selective braking of the inside rear wheel to influence body movement during cornering. The special edition received a Dark Blue fabric roof, blue air-vent surrounds and optional dedicated floor mats. Its original Japanese price was ¥2,893,000. The combination of low weight, forged wheels, Brembo brakes and suspension calibration distinguishes the 990S from an ordinary S with aftermarket wheels.


Navy Top

Navy Top was announced in December 2021, with Japanese orders accepted until 31 May 2022. Mazda used the S Leather Package as its foundation, adding an insulated Dark Blue fabric roof, body-coloured electric door mirrors and high-brightness 16-inch alloy wheels. Black leather upholstery remained standard, while six-speed manual and automatic transmissions were available. Launch prices were ¥3,191,100 for the manual and ¥3,306,600 for the automatic.

The Navy Top arrived with the same wider update that introduced Kinematic Posture Control across the Roadster range. It retained the regular S Leather Package suspension and brake specifications rather than adopting the 990S's forged wheels or dedicated chassis calibration. Although both editions use a dark-blue roof, their interiors and mechanical equipment are different. Navy Top combines the leather-appointed S Leather Package with its own roof and exterior finishes, while 990S is based on the lighter S manual and omits several comfort features.


Brown Top

The Brown Top joined the Japanese Roadster range in November 2022, bringing back the brown fabric roof previously used on the 2018 Caramel Top. This time, Mazda paired it with Terracotta Nappa leather seats and matching stitching across the dashboard and door panels. Based on the S Leather Package, the edition also received body-coloured exterior mirrors and high-brightness 16-inch alloy wheels. Its 1.5-litre engine produced 132 PS, with six-speed manual and automatic transmissions available.

The Terracotta interior provides the clearest distinction from Caramel Top, which used Sports Tan leather. Mazda also introduced Zircon Sand Metallic to the wider Roadster colour range during the 2022 update, giving Brown Top buyers an additional exterior choice. The model retained the contemporary ND's Kinematic Posture Control system and standard S Leather Package chassis specification. It did not receive the 990S's Brembo brakes, forged RAYS wheels or dedicated suspension tune. Japanese examples with the original Terracotta upholstery and brown roof should be distinguished from earlier Caramel Top cars.


35th Anniversary Model

Mazda announced the 35th Anniversary Roadster on 25 December 2024, with Japanese deliveries scheduled from February 2025. The soft-top version was based on the 1.5-litre S Leather Package V Selection with a six-speed manual gearbox, producing 136 PS. Mazda selected Artisan Red Premium Metallic, a colour created using its Takuminuri painting process, and paired it with Sports Tan leather upholstery. The interior received embossed anniversary headrests, dark-red air-vent details, dedicated carpeting and matching stitching on the steering wheel, gear lever and handbrake.

The Japanese soft-top was priced at ¥3,753,200, while separate Roadster RF anniversary models used the 2.0-litre engine. Mazda planned approximately 1,000 Japanese-market anniversary cars across both body styles, with orders accepted until 3 March 2025. Each received a dedicated anniversary ornament incorporating a serial number. The soft-top retained the V Selection's 16-inch wheel specification, while the RF received high-brightness 17-inch wheels. Unlike the 30th Anniversary, the 35th did not introduce a dedicated Brembo and RAYS performance package. Its differences are concentrated on paint, interior materials and commemorative equipment.


Mazda Spirit Racing Roadster

Mazda opened Japanese reservations for the Spirit Racing Roadster in October 2025, with sales scheduled from January 2026. Developed using experience from Mazda's Super Taikyu racing programme, it introduced the 1,997 cc SKYACTIV-G engine to a Japanese-market ND soft-top. The engine produces 184 PS at 7,000 rpm and 205 Nm at 4,000 rpm, driving the rear wheels through a six-speed manual gearbox. Mazda quoted a vehicle weight of 1,070 kg and limited the model to 2,200 units, including dealer demonstration cars. Its original Japanese price, including specified accessories, was ¥5,265,700.

The suspension uses specially calibrated Bilstein dampers, with additional chassis reinforcement and RAYS forged alloy wheels developed for the Spirit Racing programme. Mazda revised the engine's throttle response and introduced heel-and-toe assistance that uses brake, accelerator and clutch sensor information. The cabin includes Recaro semi-bucket seats, Alcantara trim, red seatbelts and a dedicated steering-wheel centre marker. Exterior changes include a mesh grille, Mazda Spirit Racing identification and aerodynamic components developed with high-speed stability in mind. The 184 PS model shares its basic 2.0-litre displacement with the 12R, but does not receive the latter's full engine and competition-equipment package.


Mazda Spirit Racing Roadster 12R

The Spirit Racing Roadster 12R was introduced alongside the regular Spirit Racing model, with a Japanese sales allocation of 200 cars selected through an application and lottery process. Its 2.0-litre SKYACTIV-G engine produces 200 PS at 7,200 rpm and 215 Nm at 4,700 rpm, following substantial internal and breathing modifications. Mazda revised the intake-port shape, hand-finished the ports, fitted different camshafts and developed a 4-1 exhaust manifold with Fujitsubo. The engine also uses lower-friction pistons and DLC-coated piston rings, while a single-mass flywheel replaces the regular dual-mass arrangement.

Additional changes include earlier thermostat operation, increased cooling capacity and precision suspension assembly and alignment. The 12R weighs approximately 1,050 kg and uses Recaro full-bucket seats, Alcantara interior materials, red cabin details and a dedicated tachometer marking the engine speed for maximum power. Each engine carries a serial-number plate, while the exterior includes 12R identification and specially finished aerodynamic components. Mazda's original Japanese price was ¥7,612,000, including the specified accessory package. Additional competition accessories, including harnesses, specialist tyres and other brake components, were offered separately rather than being standard on every 12R.


PS

Mazda announced the PS special edition on 26 June 2026, opening reservations that day ahead of a planned Japanese release in early September. The PS retained the 1.5-litre SKYACTIV-G engine and six-speed manual gearbox, with dedicated suspension, braking and exterior equipment. The engine produces 136 PS. Factory equipment includes black-painted 16-inch RAYS alloy wheels, Brembo ventilated front brakes with silver four-piston calipers and Bilstein dampers with dedicated suspension tuning. A grey insulated fabric roof, silver-and-black air-vent details and black interior controls complete the specification.

The PS arrived as part of Mazda's June 2026 update, which introduced revised acceleration-response control and heel-and-toe assistance for manual Roadsters, alongside changes to meet updated exterior noise regulations. The dedicated Bilstein suspension changes applied to the PS and soft-top RS grades. Mazda also introduced Zircon Green Metallic to the wider range, so the presence of that colour alone does not identify a PS. Unlike the Mazda Spirit Racing Roadster, PS retains the standard Japanese 1.5-litre engine rather than adopting the 2.0-litre unit. Its factory Brembo brakes, RAYS wheels and Bilstein suspension place it between the ordinary equipment grades and the more extensively modified Spirit Racing cars.

The biggest mistake buyers make when choosing a Mazda Roadster

Why low mileage, a desirable factory grade and a clean auction sheet don't always mean a better car


A low-mileage Japanese Roadster with a desirable factory grade can still be a poor purchase if it has corrosion, accident repairs or poorly executed modifications. This is particularly relevant to NA and NB models, where a clean exterior can conceal expensive structural repairs. Japanese listings make it easy to narrow the search to a particular specification, whether that's an early NA8C V Special, a six-speed NB RS, an NC with the retractable hardtop or a lightweight ND 990S. The problem is that Roadsters are frequently modified, driven enthusiastically and, in the case of older generations, restored to varying standards. A desirable factory grade tells you how Mazda originally equipped the car, not necessarily what remains underneath it today.

Corrosion is a particular concern with the NA and NB. Rust can develop inside the sills, around the rear wheel arches, underneath the floor and along structural sections that are difficult to assess from ordinary listing photographs. The NB also deserves close inspection around its front chassis rails. A car with freshly painted sills or tidy-looking arches may have received proper metal repairs, cosmetic treatment or something in between. Low mileage offers little reassurance about corrosion caused by moisture, storage conditions or previous repairs. A higher-mileage Roadster with documented structural work can be a better purchase than a low-mileage example whose underside has never been properly examined.

The newer generations have different issues. On an NC, the condition of the six-speed gearbox, suspension and Power Retractable Hard Top mechanism can matter more than whether the car is an RS or VS RHT. The ND introduces another complication: factory equipment is often changed by owners. An RS may no longer have its original Bilstein suspension or Recaro seats, while a 990S fitted with heavier aftermarket wheels and altered suspension no longer offers the complete lightweight specification Mazda developed for it. That matters when a seller asks a premium for a particular grade.

Japanese auction grades can help, but they need to be read in context. Start with the inspector's comments and damage diagram, then examine mileage records, servicing and evidence of previous repairs. A grade 4.5 car is not automatically free from mechanical problems, corrosion or modifications. For limited editions, the original paint code, factory equipment and identification records deserve the same scrutiny as the body condition.

Before importing a Mazda Roadster from Japan, establish its original factory specification and compare it with the car's current condition. A modified example is not necessarily a poor purchase, but the quality of the work, documented history and cost of putting any problems right should be reflected in the price.

Not every special-edition Roadster is a performance upgrade

Mazda produced numerous Japanese-market Roadsters with exclusive paint colours, interiors and roof finishes. Others, including the RS, NR-A, 990S and Spirit Racing models, received substantial mechanical changes. Understanding which equipment was fitted at the factory helps explain differences in Japanese asking prices and whether a particular version is worth the additional cost.

Mazda Roadster FAQ


Which Mazda Roadster engines have timing belts, and which use timing chains?

The NA and NB use timing belts. This applies to the 1.6-litre B6 and 1.8-litre BP engine families, including the factory-turbocharged NB. If the service history doesn't establish when the belt was last replaced, allow for replacement along with the tensioner and associated components. The water pump is often replaced during the same job.

The NC's 2.0-litre MZR and ND's SKYACTIV-G engines use timing chains instead. They don't require routine belt replacement, but correct oil maintenance remains important for the chain and tensioning system.

Is an original Mazda hardtop worth paying extra for on an NA or NB?

A genuine detachable Mazda hardtop can add value, particularly if the car retains the correct mounting hardware, seals, rear-window heating connections and original paint. It also provides another option for winter use in Ireland without permanently changing the Roadster.

However, a hardtop is not proof that the car was originally supplied with one. Many were purchased separately or transferred between vehicles. Check the rear screen, mounting catches, rubber seals and paint condition. Also remember that the rare Japanese NB Roadster Coupe is a completely different factory-built fixed-roof model, not a convertible fitted with a removable hardtop.

Does a Japanese Mazda Roadster ND need premium petrol in Ireland?

Mazda specifies premium unleaded petrol for the Japanese ND's SKYACTIV-G engines. In Ireland, that means checking the availability of suitable higher-octane petrol, commonly 97–98 RON, rather than assuming ordinary 95 RON is the recommended fuel.

Mazda's Japanese documentation permits regular unleaded petrol when premium fuel is unavailable, but warns that engine performance may be reduced. The exact requirements should be confirmed against the manual for the car's production period and engine. This is particularly relevant to the higher-output Spirit Racing models, where the correct fuel specification should be established before purchase.

Will a Japanese ND Roadster fit a taller driver comfortably?

The ND's relatively short cabin, low windscreen and close-fitting seating position can be restrictive for taller drivers. Seat position matters as much as overall height, particularly if you have long legs or need more headroom with the fabric roof closed.

Mazda introduced telescopic steering adjustment in July 2018, allowing the steering wheel to move forwards and backwards as well as vertically. Earlier Japanese ND models lack that adjustment. The factory Recaro seats fitted to certain RS and special editions also have different bolsters from the regular seats. Ideally, sit in the same seating configuration before bidding on a car in Japan.

Do Japanese Mazda Roadster headlights need converting for Irish roads?

Japan and Ireland both drive on the left, so Japanese Roadsters already have right-hand-drive layouts and headlights intended for left-side traffic. Their speedometers also display kilometres per hour. This avoids two common problems encountered when importing cars from countries that drive on the right.

However, that doesn't guarantee the complete lighting system meets Irish requirements. Headlamp aim, beam pattern, indicator operation, rear fog-light provision where required and any aftermarket lighting changes must be checked. Older NA and NB models may have replacement headlamp units, while modified NC and ND examples can have non-standard LED or HID conversions.

Can I import a modified Mazda Roadster and still pass the Irish NCT?

Modifications aren't automatically prohibited, but they must comply with Irish roadworthiness requirements. Japanese Roadsters frequently appear with coilovers, wider wheels, aftermarket exhaust systems, bucket seats, roll cages or engine modifications. These can affect ground clearance, tyre coverage, emissions, noise, restraint systems and insurance.

A current Japanese Shaken inspection does not guarantee that the same modifications will satisfy Irish requirements. Before bidding, request clear photographs and documentation of the altered components. Engine swaps, removed catalytic converters and structural modifications deserve particular care. The NCT, insurance and registration implications should be established before the car leaves Japan.

Is it difficult to insure a Japanese Eunos Roadster or a modified MX-5 in Ireland?

Insurance is available, including through specialist brokers, but the exact model and modifications can affect which companies will quote. An early Eunos Roadster may not appear in an insurer's standard vehicle database under the familiar Mazda MX-5 name. Providing the Japanese chassis code, engine size, production year and correct model designation can help identify it.

Modified cars may require specialist cover, particularly those with turbo conversions, engine swaps or competition equipment. For rare M2 and limited-edition models, ask whether an agreed-value policy is available. 

Should I wait until a Mazda Roadster qualifies for the €200 classic VRT rate?

That can make a substantial difference to the total cost, particularly for late NA and early NB examples. Under current Irish rules, a vehicle proven to be more than 30 years old when registered qualifies for Category C VRT at €200. For example, a Roadster first registered in Japan in March 1997 would reach the 30-year threshold in March 2027. The exact qualifying date should be established from the vehicle's documentation before arranging Irish registration.

The important point is timing. You cannot import a 29-year-old Roadster, leave it unregistered for several months and assume ordinary registration deadlines no longer apply. Vehicles must generally be registered within 30 days of entering Ireland. Our Irish VRT guide explains more about this rule.

What emissions documentation should I obtain before importing an NC or ND Roadster?

For an NC or ND that doesn't qualify for classic VRT, obtain acceptable evidence of its original CO₂ and NOx emissions before purchasing. Revenue can use Japanese Ministry of Land, Infrastructure, Transport and Tourism records, but the vehicle's model designation, engine, weight and other identifying details must match its Japanese Export Certificate.

A Japanese auction sheet alone is not sufficient emissions documentation. Missing or unacceptable figures can result in the highest applicable VRT rates being charged. The six-speed manual, automatic and different engine versions should not automatically be treated as having identical emissions figures. 

Can a Japanese Mazda Roadster qualify for reduced customs duty when imported into Ireland?

Potentially. The EU-Japan Economic Partnership Agreement provides preferential customs treatment for qualifying Japanese-origin goods, including vehicles. However, buying a car from a Japanese dealership or auction does not automatically establish eligibility. The vehicle must satisfy the applicable rules of origin, and the importer must have acceptable supporting documentation.

This can be especially relevant to older Roadsters, where obtaining the necessary origin evidence may not be straightforward. Customs duty and Irish VAT are separate from VRT, so even a Roadster qualifying for €200 classic VRT can still attract import charges. The requirements and available documentation should be checked before calculating the full import costs.

Before you import 


Before importing a Mazda Roadster from Japan, confirm the chassis code, production month, original grade and transmission. On NA and NB models, pay particular attention to corrosion around the sills, wheel arches and structural sections. NC buyers should inspect the gearbox and retractable roof mechanism where fitted, while ND examples need checks for modifications and missing factory equipment. Review the Japanese auction inspector's comments, damage diagram and service history rather than relying on the overall grade.

Compare the complete Irish landed cost, including shipping, customs duty, VAT and VRT, against equivalent cars already registered in Ireland. For older Roadsters, confirm eligibility for the €200 classic VRT rate based on the vehicle's age at registration. Japanese infotainment and radio compatibility should also be checked on newer models.


Find the Mazda Roadster that's right for you


Looking for an original Eunos NA, a six-speed NB RS, an NC retractable hardtop or a later ND? Tell us your preferred generation, specification and budget, and we'll help you compare suitable Mazda Roadsters available in Japan. 


See what your budget could buy in Japan, including estimated costs to bring it to Ireland.


JDM Guides

Looking for more information? Explore our most popular import guides covering costs, VRT, buying advice and everything involved in importing a car from Japan to Ireland.


Japanese auction sheet damage codes are shorthand used by auction inspectors to record visible defects and previous work across a vehicle. Depending on the auction house, markings such as A can indicate scratches, U dents, W signs of paintwork or repair, S rust, C corrosion, while X and XX can identify panels requiring replacement or already...

Choosing the right car isn't just about finding the right make, model or budget. When importing from Japan, the exact specification can dramatically influence what you'll pay by the time the vehicle reaches Ireland. Two cars that appear almost identical may have completely different VRT calculations, running costs and long-term value, because of...

Choosing the best Japanese wheelchair accessible vehicle isn't about buying the most expensive model or the one with the biggest badge. It's about finding the WAV that best suits your mobility requirements, family, passengers and everyday lifestyle. For some buyers, that may be a compact family WAV such as the Toyota Sienta, Honda Freed, Toyota...

The Toyota Chaser JZX100 has quietly become one of Japan's most sought-after performance saloons. Once considered an affordable alternative to the Nissan Skyline, today's best examples are increasingly difficult to find, with clean, original cars attracting strong demand from enthusiasts across Europe, Australia and the United States. As...

"Importing a car from Japan sounds risky. There has to be a catch. I'd rather see the car before buying it. The paperwork must be a nightmare. What if the car arrives with hidden problems?" If you've ever considered importing a car from Japan, you've probably heard at least one of these before. Friends, family, online forums and social media...

To import a car from Japan yourself, you choose and verify the vehicle, buy it, arrange export and shipping, clear customs, pay taxes, complete VRT and register it in Ireland. Importing independently does not mean completing every task without professional assistance. You will still normally need a Japanese exporter or auction agent, a shipping...