Toyota MR2 Import Ireland: Buyer's Guide 


Two mid-engined generations, supercharged AW11s, turbocharged SW20s and Japanese grade differences explained.

Compare Japanese AW10, AW11 and SW20 models, from the 1.5-litre S and supercharged G-Limited to the turbocharged GT and GT-S, with guidance on specifications, condition and Irish import costs.

Toyota introduced the MR2 in Japan in June 1984, creating a compact two-seat sports car with its engine mounted behind the occupants rather than under the bonnet. The original 10 Series combined a lightweight body, rear-wheel drive and mechanical components adapted from Toyota's existing passenger-car range. However, not every first-generation MR2 offered the same driving experience. The AW10 S used a 1.5-litre 3A-LU engine, while the AW11 introduced the more powerful 1.6-litre 4A-GE in grades such as G and G-Limited. In August 1986, Toyota added the supercharged 4A-GZE, giving the G Supercharger and G-Limited Supercharger considerably stronger performance than their naturally aspirated counterparts. Optional T-bar roofs, Sport Package specifications and special editions added further variety to a model that was already mechanically distinctive.


The second-generation 20 Series arrived in October 1989 with a larger body, revised chassis and a new range of 2.0-litre engines. The SW20 offered the naturally aspirated 3S-GE in G and G-Limited specifications, while the turbocharged 3S-GTE powered the GT and later GT-S. Japanese production continued through several significant revisions, with turbo output increasing from 225 PS to 245 PS and the naturally aspirated engine eventually gaining VVT-i and reaching 200 PS. Toyota also made substantial suspension and braking improvements, while special editions such as the G-Limited Super Edition and G-Limited Bilstein Package introduced their own factory equipment. For an Irish buyer, the distinction between an early AW11, a supercharged first-generation car and a late SW20 turbo goes well beyond styling or advertised mileage. This guide examines both Japanese MR2 generations, their original grades, engine developments and important factory differences, alongside the practical considerations involved in buying, shipping and registering one in Ireland.

The Evolution of the Toyota MR2


How Toyota developed a lightweight mid-engined runabout into a 245 PS turbocharged sports car

The Toyota MR2 began with a relatively simple idea: combine the compact dimensions and mechanical accessibility of an everyday Toyota with the engine layout of a dedicated sports car. When the first-generation 10 Series arrived in Japan in June 1984, it became the country's first mass-produced mid-engined passenger car. Toyota designed it to be usable rather than intimidating, with a relatively upright driving position, practical luggage compartments and a lightweight body weighing as little as 920 kg in its original 1.5-litre specification.

The early range consisted of the AW10, powered by the 1.5-litre 3A-LU, and the more powerful AW11 with Toyota's 1.6-litre 4A-GE twin-cam engine. The original Japanese 4A-GELU was rated at 130 PS gross, using the power measurement standard applied at the time. Later Japanese specifications adopted net power ratings, so the published figures are not directly comparable. Its transverse engine installation, five-speed manual or four-speed automatic transmission and independent suspension created a mechanical package quite different from Toyota's conventional front-engined coupes.

The first major development arrived in August 1986, when Toyota introduced the supercharged 4A-GZE. Using a Roots-type supercharger, it increased output to 145 PS and delivered considerably stronger low- and mid-range torque than the naturally aspirated engine. Toyota also introduced removable T-bar roof panels, expanding the MR2's appeal without abandoning its compact dimensions. By the end of the decade, the AW11 had developed from an affordable mid-engined runabout into a much more specialised small sports car.

October 1989 brought a considerably more ambitious second generation. The SW20 retained the transverse mid-engined layout but adopted a longer, wider and heavier body, with styling that reflected Toyota's move towards a more substantial sports-car identity.  

Engine capacity increased to 2.0 litres, with the naturally aspirated 3S-GE producing 165 PS and the turbocharged 3S-GTE delivering 225 PS. G and G-Limited continued as naturally aspirated grades, while GT introduced a level of performance that the original AW11 had never approached.

The additional power and weight placed greater demands on the chassis. Toyota's December 1991 revision addressed suspension geometry, braking performance and tyre specification, introducing wider 15-inch wheels and revised handling characteristics. The GT-S also joined the Japanese range as a less extensively equipped turbocharged alternative to the GT. These changes were particularly significant because the SW20's mid-engined weight distribution made suspension setup and tyre selection central to its behaviour.

Development continued in October 1993. Toyota increased turbo output to 245 PS, while the naturally aspirated 3S-GE reached 180 PS with manual transmission and 170 PS with automatic transmission. Further chassis changes accompanied the engine updates, along with revised rear lighting and a redesigned spoiler. ABS remained optional on relevant Japanese specifications, while dual airbags and sports ABS became standard across the range in June 1996. The 1996 update subsequently introduced standard dual airbags and further safety improvements, while Toyota Technocraft produced the unusual open-top MR Spider in limited numbers.

The final substantial revision arrived in December 1997. Toyota introduced VVT-i to the naturally aspirated 3S-GE, raising output to 200 PS, while the turbocharged GT and GT-S retained their 245 PS engines. By the time Japanese MR2 production ended in August 1999, the model had evolved considerably beyond its original lightweight concept. The AW11 remained a compact and relatively straightforward driver's car, while the later SW20 combined stronger engines, more sophisticated chassis development and substantially greater performance. Both shared the same fundamental layout, but the engineering differences between them created two distinctly different interpretations of Toyota's mid-engined sports car.

Toyota MR2 10 Series

Toyota MR2 10 Series (June 1984 – October 1989)


Japanese AW10 and AW11 specifications, 4A-GE engines, supercharged models and factory editions

Toyota introduced the first-generation MR2 to the Japanese market in June 1984. Its short, wedge-shaped body, pop-up headlights, low roofline and prominent side air intake gave it the appearance of a much more expensive sports car. Beneath that styling, however, was an unusual combination of familiar Toyota engineering. The transverse engine and gearbox arrangement came from the company's front-wheel-drive expertise, but Toyota placed the entire powertrain behind the seats, leaving the rear wheels to do the driving. The resulting AW10 and AW11 were compact, light and quite different from the front-engined Celica, Levin and Trueno models already available in Japan.

The original AW10 S had a modest 83 PS 1.5-litre engine, but the AW11 was the version that established the MR2's reputation. Its 1.6-litre 4A-GELU, from the same engine family used in the AE86, was originally rated at 130 PS gross in Japan.

With approximately 950 kg to move in manual form, the twin-cam engine provided stronger acceleration than the 1.5-litre AW10", particularly towards the upper end of the rev range. The five-speed manual suited the engine's willingness to rev, while the mid-engined layout placed the sound of the 4A-GE directly behind the occupants. Toyota also offered a four-speed automatic, giving the MR2 an unexpectedly broad appeal for a two-seat sports car.

The August 1986 facelift brought the car's biggest mechanical change. Toyota introduced the supercharged 4A-GZE, producing 145 PS and 186 Nm, transforming the way the AW11 accelerated without increasing its 1,587 cc displacement. The revised model also gained updated exterior details, a redesigned interior and the option of a removable T-bar roof. Toyota continued developing the car through 1987 and 1988, with further suspension changes and distinctive editions such as White Runner, Black Limited and the two Super Edition models. By the time the SW20 replaced it in October 1989, the original MR2 had developed a following for more than its appearance. The AW11 combined an entertaining naturally aspirated engine, unusually compact dimensions and a mid-engined driving experience that Toyota would never reproduce in quite the same form again.


Current Japanese Retail Price: Around ¥1.5 million–¥5 million+ (approximately €8,500–€28,400+ / $9,400–$31,300+). This indicative range covers much of the advertised Japanese first-generation MR2 retail market, rather than auction or wholesale prices. Ordinary high-mileage naturally aspirated cars can occupy the lower end, while original supercharged manuals, low-mileage G-Limited examples and desirable factory special editions can command considerably more. Restoration projects or heavily modified cars may be advertised below this range. Japanese asking prices also reflect structural condition, accident history, transmission, corrosion, remaining factory equipment and the quality of previous repairs. A rare specification is not automatically a better purchase, particularly when expensive original components are missing.

Import cost considerations: All Japanese 10 Series MR2s now exceed Ireland's 30-year vintage threshold, making them eligible for the €200 flat VRT rate, subject to the normal registration requirements. Japanese retail prices still exclude inland transport, export charges, shipping, insurance, customs duty, Irish VAT and registration-related expenses. Production year and original vehicle identity should be established before purchasing, particularly where an AW11 has been modified or had its engine replaced. Structural inspection is especially important because rust or previous accident repairs can make an apparently affordable Japanese car considerably more expensive to prepare for Irish roads.

Engine output:

  • 3A-LU 1.5-litre SOHC four-cylinder: 83 PS, approximately 118 Nm

  • 4A-GELU 1.6-litre DOHC 16-valve four-cylinder: 130 PS gross in original 1984 specification

  • 4A-GELU 1.6-litre DOHC 16-valve four-cylinder: 120 PS net, approximately 142 Nm in later Japanese specifications

  • 4A-GZE 1.6-litre DOHC 16-valve supercharged four-cylinder: 145 PS, approximately 186 Nm

The original 130 PS rating was measured using the older gross-output standard, while later Toyota catalogues used net figures. These numbers should not be interpreted as evidence of a direct 10 PS reduction in engine performance.

Engine: The AW10 used Toyota's carburetted 1,452 cc 3A-LU SOHC eight-valve four-cylinder, designed around economical everyday performance. The AW11 received the fuel-injected 1,587 cc 4A-GELU with twin overhead camshafts and 16 valves, giving the higher grades substantially stronger performance. From August 1986, the supercharged 4A-GZE combined the 4A engine architecture with an SC12 Roots-type supercharger and intercooler. Although both AW11 engines share the same displacement, they differ in compression ratio, induction equipment, engine management and associated mechanical components.

Best for: Drivers who want a compact Japanese mid-engined sports car with relatively simple mechanical construction and a strong connection to Toyota's 1980s performance history. Naturally aspirated AW11 manuals suit those who value low weight and engine response, while supercharged G and G-Limited models offer stronger acceleration. Original special editions appeal to buyers interested in factory specification and preservation.

Body style: Two-door, two-seat fixed-roof coupe, with optional moonroof and later removable T-bar roof configurations depending on production period and grade. The original Japanese model measured 3,925 mm long, 1,665 mm wide and 1,250 mm high, with a 2,320 mm wheelbase. Later versions grew slightly in overall length. Toyota's original Japanese specifications listed the AW10 S manual at 920 kg and the AW11 G/G-Limited manual at 950 kg. Vehicle weight varied with transmission, roof configuration, equipment and subsequent production revisions.

Drive: Mid-mounted transverse engine with rear-wheel drive across the entire Japanese 10 Series range. Toyota used MacPherson strut independent suspension at both ends, coil springs and rack-and-pinion steering. The engine's position behind the passenger compartment placed a greater proportion of the vehicle's mass towards the rear than in conventional front-engined Toyota models. Suspension specifications evolved during production, particularly on later supercharged cars and those fitted with the AD Package. Original suspension geometry, tyre condition and structural alignment are particularly relevant when evaluating a surviving AW11.

Transmission: Five-speed manual and four-speed automatic transmissions were available in the Japanese range. The original 1.5-litre S used a conventional four-speed automatic with two-way overdrive when specified without the manual gearbox, while AW11 models offered Toyota's electronically controlled ECT-S automatic. The supercharged models also had manual and automatic configurations with transmission specifications appropriate to the additional torque. The original gearbox, clutch condition, shift linkage and evidence of drivetrain conversions should be checked when comparing older Japanese listings.

Notable features: Japan's first mass-produced mid-engined passenger car, transverse engine installation, retractable headlights, independent strut suspension, 4A-GELU twin-cam engine and the introduction of the 145 PS 4A-GZE supercharger in August 1986. Other important developments included the removable T-bar roof, revised suspension and braking equipment, the 1987 AD Package and several Japan-market special editions. The MR2 also received the 1984–1985 Japan Car of the Year award.


How the naturally aspirated 4A-GE and supercharged 4A-GZE compare

The naturally aspirated and supercharged AW11s may share the same body and basic engine family, but they offer noticeably different experiences.

The original 4A-GE is the engine many Toyota enthusiasts already know from the AE86. In the MR2, however, it sits immediately behind the seats, giving the mechanical sounds of the intake and engine a much greater presence inside the cabin. It needs revs to deliver its strongest performance, which suits the light weight and close, compact feel of the early AW11. The naturally aspirated car is not particularly powerful by modern standards, but that is part of its appeal. Much of the enjoyment comes from carrying momentum, using the gearbox and working with the engine rather than relying on outright acceleration.

The 4A-GZE takes a different approach. Its SC12 Roots-type supercharger provides additional torque much earlier in the rev range, making the car feel stronger without requiring the driver to keep the engine spinning near its maximum output. Toyota also altered the engine's compression ratio and supporting components to accommodate forced induction.

There is a weight difference, too. A supercharged AW11 carries additional hardware compared with the early naturally aspirated models, and the later cars received their own chassis revisions.

For some enthusiasts, the lighter, simpler 4A-GE manual is the AW11 to own. Others specifically want the supercharger's immediate response and distinctive mechanical character.

The two engines offer different power delivery and maintenance requirements. They are two different ways to enjoy the same compact mid-engined Toyota.


Japanese Toyota MR2 10 Series grades 

The Japanese 10 Series began with three regular grades: S, G and G-Limited. S used the 1.5-litre AW10 chassis, while G and G-Limited belonged to the more powerful 1.6-litre AW11 range. Toyota subsequently expanded the line-up through equipment packages, supercharged derivatives and limited-production editions.

The G Sport Package offered a more focused specification around the naturally aspirated engine, while the 1986 introduction of the G Supercharger and G-Limited Supercharger created a distinct performance branch. The later AD Package added important suspension equipment rather than simply exterior decoration.

Special editions such as White Runner, Black Limited, Super Edition and Super Edition II were developed around existing mechanical specifications but introduced distinctive colours, interiors and factory components.

The grades below are arranged broadly from simpler specifications towards the more specialised versions, with special editions presented separately. The order reflects equipment and technical differences rather than their current market value or desirability.


S

S was the entry-level specification when Toyota introduced the MR2 in June 1984. Unlike the more familiar AW11 models, it used the AW10 chassis and 1,452 cc 3A-LU SOHC four-cylinder engine producing 83 PS. Buyers could choose a five-speed manual or four-speed automatic transmission, with rear-wheel drive and the same fundamental mid-engined body layout as the more expensive versions. At approximately 920 kg in original manual specification, it was also the lightest MR2 in the Japanese launch range.

The S is interesting because it represents Toyota's original affordable sports-runabout concept without the performance emphasis of the twin-cam cars. Its simpler engine and lower equipment level are historically significant, although an AW10 should not be valued as though it were a 4A-GE-powered AW11. Surviving examples are unusual, and originality, corrosion condition and the availability of model-specific replacement parts deserve particular attention.


G 

G was the standard 1.6-litre performance grade and one of the main models in the original Japanese MR2 range. It used the AW11 chassis with the 1,587 cc 4A-GELU DOHC 16-valve engine, producing 130 PS gross in the original 1984 specification. Five-speed manual and electronically controlled four-speed automatic transmissions were available. Compared with the AW10 S, the G offered substantially stronger engine performance and the more sophisticated 4A-G powertrain while retaining a relatively straightforward equipment specification.

For someone interested in the original naturally aspirated AW11, G provides much of the mechanical character associated with the first-generation MR2 without the additional equipment of G-Limited. However, early and later G models differ in their factory specification, engine-output reporting and chassis revisions. Previous engine swaps, suspension modifications and replacement interior components should be considered carefully, particularly when an advertised G has been upgraded to resemble a more expensive grade.


G Sport Package

The G Sport Package was a Japanese AW11 specification offered in the June 1985 to July 1986 catalogue period. It combined the naturally aspirated 1,587 cc 4A-GELU engine with a five-speed manual gearbox, retaining the standard G engine output. The Sport Package was an equipment specification rather than a separate higher-performance engine variant.

Its appeal lies in combining the original naturally aspirated 4A-GE driving experience with a more distinctive factory specification. The package should not be confused with the later supercharged AD Package, which introduced specific chassis changes. Because many surviving AW11s have received aftermarket wheels, body trim and suspension components, the presence of sporting accessories does not establish a genuine G Sport Package. The original catalogue configuration and production period should be checked before attributing additional value to the package.


G-Limited

G-Limited occupied the upper end of the original naturally aspirated AW11 range. It used the same 1,587 cc 4A-GELU twin-cam engine as the regular G, with five-speed manual and four-speed automatic configurations available. The difference was primarily equipment and presentation rather than engine performance. Toyota positioned G-Limited as the more comprehensively specified MR2, with additional convenience and interior features, while optional roof configurations added further variety.

G-Limited is one of the most recognisable Japanese first-generation MR2 grades, but it covers several different production periods. An early example with the original roof and interior specification is not identical to a later facelift car. Buyers should examine factory upholstery, trim, exterior components and evidence of electrical modifications. The G-Limited name alone does not indicate a supercharged engine, so naturally aspirated and supercharged versions must be identified separately.


G Supercharger

G Supercharger arrived with the August 1986 revision and introduced the 1,587 cc 4A-GZE engine to the regular G specification. Toyota fitted an SC12 Roots-type supercharger and intercooler, raising output to 145 PS and approximately 186 Nm. Both manual and automatic transmissions were offered, while the car retained the AW11's mid-engined, rear-wheel-drive layout. The additional torque gave it considerably stronger acceleration than the naturally aspirated G, particularly at moderate engine speeds.

This is one of the more interesting grades for drivers who want the 4A-GZE without necessarily pursuing the higher equipment level of G-Limited. However, the supercharger, drive system, cooling arrangements and engine management introduce additional inspection requirements. Factory supercharged cars should be distinguished from naturally aspirated AW11s fitted with converted engines. Original identification, supercharger condition and evidence of appropriate maintenance are all important when comparing Japanese examples.


G Supercharger AD Package

The G Supercharger AD Package appeared in the August 1987 Japanese catalogue period. It retained the 145 PS 4A-GZE engine and added a dedicated suspension specification, rear stabiliser and revised tyres. The package was offered on factory supercharged AW11 models, with five-speed manual examples documented in Japanese catalogue records.

The AD Package is particularly relevant when comparing late supercharged AW11s because it represents an identifiable factory suspension specification. However, many cars have subsequently received replacement dampers, springs, anti-roll bars or wheels. An ordinary G Supercharger fitted with similar aftermarket components should not automatically be described as an original AD Package. Factory identification and the remaining original suspension equipment help establish whether the premium attached to an advertised example is justified.


G-Limited Supercharger

G-Limited Supercharger was introduced alongside the regular G Supercharger in August 1986. It combined the higher-grade G-Limited equipment specification with Toyota's 1,587 cc supercharged 4A-GZE engine, producing 145 PS. Five-speed manual and four-speed automatic versions were offered, and T-bar roof configurations were also available. Compared with the naturally aspirated G-Limited, the main mechanical difference was the supercharged engine and its associated drivetrain equipment.

For enthusiasts, this grade brings together the strongest regular AW11 engine with the more comprehensive factory equipment package. However, a G-Limited Supercharger can vary significantly according to production period, roof specification and subsequent modifications. T-bar roof seals, the supercharger system, original interior trim and gearbox condition deserve careful attention. A high-quality naturally aspirated G-Limited should not be dismissed simply because an advertised supercharged example has a more desirable badge.


G-Limited Supercharger AD Package

G-Limited Supercharger AD Package was among the most comprehensively developed regular AW11 specifications. It paired the 145 PS 4A-GZE engine with G-Limited equipment and the additional chassis specification introduced in August 1987. The AD Package included revised suspension tuning, a rear stabiliser and performance-oriented tyres, while manual, automatic and T-bar roof configurations appeared in Japanese catalogues. The engine output remained unchanged from the ordinary G-Limited Supercharger.

This grade is particularly relevant to buyers interested in the later technical development of the first-generation MR2. Its additional equipment should be assessed as a complete factory package rather than simply a collection of desirable modifications. Original suspension components may have been replaced during previous ownership, and a car described as an AD Package should have documentation supporting its original identity. Corrosion, structural alignment and the condition of the supercharger system remain more consequential than the completeness of minor trim items.


White Runner

White Runner was an early Japanese special edition introduced in January 1985, with a reported production allocation of 300 cars. Based on the naturally aspirated G-Limited, it retained the 1.6-litre 4A-GELU engine and rear-wheel-drive layout. Its distinguishing features included Super White II paintwork, silver exterior stripes, colour-matched bumpers and trim, and a distinctive black-and-red interior. Factory equipment also included power windows, electromagnetic door locks and bronze-tinted front glass, alongside body-coloured exterior components.

The attraction of White Runner is its place among the earliest Japanese MR2 special editions rather than any increase in engine performance. Original paintwork, stripes, interior upholstery and factory exterior components are particularly important because much of the specification was visual. A standard G-Limited repainted white does not become a White Runner. Buyers should verify original identification and inspect carefully for previous restoration work, especially where edition-specific trim or exterior finishes have been recreated.


Black Limited

Black Limited appeared in January 1986 as another early Japanese special edition, before Toyota introduced the supercharged AW11. It was based on the naturally aspirated 1.6-litre model and featured distinctive black metallic paintwork, colour-matched exterior components and dedicated interior details. Its factory equipment included dedicated light-grey seat upholstery, a special steering wheel, a matching gear knob and distinctive exterior protection mouldings. The naturally aspirated 4A-GELU engine was unchanged. Mechanically, it remained part of the original naturally aspirated 4A-GELU range.

Black Limited is interesting because it belongs to the final period before the August 1986 mechanical update. Its identity is closely tied to the original Japanese appearance package, so surviving examples should be assessed for factory paint, interior completeness and previous repairs. A later AW11 finished in black may look similar but belong to a different production specification. The original chassis details and special-edition equipment are more reliable identifiers than exterior colour alone.


Super Edition

The original Super Edition appeared in January 1988 as a special specification developed from the supercharged G-Limited AD Package. It retained the 145 PS 4A-GZE engine and added distinctive factory presentation, including white-and-beige metallic two-tone paintwork, colour-coordinated exterior components and dedicated interior materials. Equipment included a MOMO leather-wrapped steering wheel, leather-trimmed gear knob and parking-brake grip, along with special seat upholstery and other finishing details.

This edition is particularly interesting because it combined an already specialised mechanical specification with a distinctive factory appearance package. Its value depends partly on the preservation of components that may be difficult to replace with correct period items. A standard G-Limited Supercharger modified with similar wheels or interior accessories is not necessarily a genuine Super Edition. Original paint, factory equipment and documentary evidence should be considered alongside the underlying mechanical and structural condition.


Super Edition II

Super Edition II followed in January 1989 as a final-production Japanese special edition. It retained the AW11's 1.6-litre supercharged mechanical specification, with the 4A-GZE producing 145 PS, but introduced a different visual and interior treatment from the previous Super Edition. Its defining equipment included Blackish Blue Mica metallic paintwork, factory Recaro seats, a MOMO leather-wrapped steering wheel, dedicated door trim and leather-trimmed controls. The specification belonged to the final period of first-generation MR2 production.

For a collector interested in late Japanese AW11 models, Super Edition II is one of the most distinctive factory configurations. Its original Recaro seats, interior trim and exterior finish are central to identifying a complete example. Replacement seats, repainted panels or aftermarket steering wheels can reduce the car's originality even when the engine and chassis remain correct. As with other rare AW11s, verified factory identity, accident history and mechanical condition should take priority over a special-edition badge alone.

Toyota MR2 20 Series

Toyota MR2 20 Series (October 1989 – August 1999)


From the original 225 PS turbo to the final 245 PS GT-S and 200 PS VVT-i models

The second-generation Toyota MR2 arrived in Japan on 17 October 1989, bringing a completely different character to the little mid-engined sports car. The sharp, angular AW11 gave way to a wider, lower-looking body with flowing lines, muscular rear arches and large side air intakes. Its proportions invited comparisons with considerably more expensive European sports cars, but the changes went much deeper than the styling. The new SW20 was longer, heavier and substantially more powerful, with Toyota replacing the original 1.6-litre engines with two versions of its 2.0-litre 3S family. The naturally aspirated 3S-GE produced 165 PS in the G and G-Limited, while the turbocharged 3S-GTE delivered 225 PS in the flagship GT. The 225 PS 3S-GTE represented a substantial increase in output over the first-generation MR2.

The early SW20 was also a much more demanding machine than its predecessor. With the engine behind the seats, substantial rear weight bias and considerably more power than the AW11, the car developed a reputation for responding sharply to sudden throttle changes, particularly when driven close to its limits. Toyota took that behaviour seriously. The December 1991 revision brought significant suspension changes, larger brakes, wider tyres and the introduction of the less extensively equipped GT-S turbo. A second major update followed in October 1993, increasing turbo output to 245 PS and giving the car its distinctive round rear lights and revised rear spoiler. Further improvements arrived in June 1996, while the final December 1997 revision brought the naturally aspirated 3S-GE to 200 PS through VVT-i technology. By the end of production in August 1999, the SW20 had undergone five recognised development stages. An original 1989 GT and a final-production 1999 GT-S might carry the same SW20 chassis designation, but their engines, suspension specifications, braking systems and driving characteristics tell very different stories.


Current Japanese retail price: Around ¥1.5 million–¥5.5 million+ (approximately €8,500–€31,200+ / $9,400–$34,400+). Japanese asking prices cover everything from tired, modified early G models to carefully preserved late-production GT and GT-S cars. Naturally aspirated automatics generally occupy the more accessible end, although a clean manual G-Limited with the final 200 PS engine can attract strong interest. Original turbocharged cars, particularly the later III, IV and V types, command more substantial prices. Factory paintwork, correct interior equipment, original body panels and documented maintenance influence values considerably. Some exceptionally clean final-production examples are advertised on request rather than with a public price. These figures represent an indicative Japanese retail range, not auction prices or the total cost of importing one to Ireland.

Import cost considerations: The SW20's production dates make VRT particularly relevant for Irish buyers. Cars more than 30 years old at the time of Irish registration qualify for the €200 vintage VRT rate. As of November 2026, that covers eligible earlier SW20s, but not the later 1997–1999 examples. Those newer cars require an individual VRT assessment until they reach the qualifying age. Japanese purchase prices also exclude shipping, export handling, marine insurance, customs duty, Irish VAT and registration expenses. Production date, original engine specification and previous modifications should be established before comparing total import costs.

Engine output:

  • 3S-GE 2.0-litre DOHC 16-valve: 165 PS / 191 Nm (October 1989–October 1993)

  • 3S-GE 2.0-litre revised DOHC, manual: 180 PS / 191 Nm (October 1993–December 1997)

  • 3S-GE 2.0-litre revised DOHC, automatic: 170 PS / 191 Nm (October 1993–December 1997)

  • 3S-GE 2.0-litre VVT-i DOHC, five-speed manual: 200 PS / 206 Nm (December 1997–August 1999)

  • 3S-GTE 2.0-litre turbocharged DOHC: 225 PS / 304 Nm (October 1989–October 1993)

  • 3S-GTE 2.0-litre revised turbocharged DOHC: 245 PS / 304 Nm (October 1993–August 1999)

Engine: Every regular Japanese SW20 used a 1,998 cc four-cylinder engine from Toyota's 3S family. G and G-Limited received the naturally aspirated 3S-GE, while GT and GT-S used the intercooled, turbocharged 3S-GTE. Both engines featured twin overhead camshafts and 16 valves, but their internal construction, compression ratios, induction systems and supporting components differed. The naturally aspirated engine underwent several significant revisions, culminating in the 200 PS VVT-i version introduced in December 1997. The turbocharged engine received its most substantial performance update in October 1993, when Toyota introduced the 245 PS specification.

Best for: Enthusiasts who want the power and presence of a 1990s Japanese mid-engined sports car. The naturally aspirated G and G-Limited offer the traditional high-revving 3S-GE experience, while the GT and GT-S deliver the considerably stronger turbocharged performance for which the SW20 became famous.

Body style: Two-door, two-seat mid-engined coupe, offered with a fixed metal roof or removable T-bar roof panels. The SW20 measured 4,170 mm long and 1,695 mm wide, with a 2,400 mm wheelbase. Overall height was approximately 1,235–1,240 mm depending on production period. Kerb weight varied considerably, from around 1,160 kg for an original manual G to approximately 1,300 kg for later turbocharged T-bar roof versions. Luggage space was provided in a rear compartment behind the engine, with additional storage beneath the front bonnet.

Drive: Rear-wheel drive throughout Japanese production, with the engine mounted transversely ahead of the rear axle. Toyota retained independent MacPherson strut suspension at both ends but redesigned the chassis around the SW20's greater weight and performance. The December 1991 revision introduced important suspension geometry changes, larger brakes and wider rear tyres. Suspension and damper specifications changed during SW20 production, while limited-slip differential availability also varied by year and grade. From June 1996, Toyota offered a helical LSD as an option on manual G and G-Limited models.

Transmission: Five-speed manual transmissions were used throughout the Japanese turbocharged range, with the stronger E153 transaxle fitted to the 3S-GTE models. Naturally aspirated G and G-Limited versions offered either a five-speed manual S54 gearbox or four-speed electronically controlled automatic. Toyota revised the naturally aspirated SW20's manual transmission during production. Japanese MR2 technical references identify an August 1992 update involving the second-gear synchroniser, although the exact specification should be checked against the applicable Toyota repair manual. The GT and GT-S were not offered with automatic transmissions in the Japanese catalogue. A turbocharged automatic advertised as a factory-standard SW20 should therefore be treated with considerable caution.

Notable features: First Japanese MR2 with 2.0-litre engines, factory 225 PS and later 245 PS turbocharged performance, steering-linked front fog lamps on selected grades, optional T-bar roof, and a substantial suspension and braking revision in December 1991. Further developments included the introduction of GT-S, Bilstein dampers, the 1993 round rear lights, 1996 standard dual airbags and sports ABS, and the final 200 PS VVT-i 3S-GE. Toyota Technocraft also produced the rare MR Spider open-top derivative.


The five SW20 revisions and why the year matters so much

Among MR2 enthusiasts, the SW20 is commonly discussed in five versions: I, II, III, IV and V. These are production-revision designations, not separate generations, but they tell you considerably more about an individual car than the SW20 badge alone.

Type I (October 1989–December 1991) is the original car, with the 165 PS naturally aspirated engine or 225 PS turbo. It has the earliest suspension geometry, 14-inch wheels and the original rear-light arrangement. These cars retain the character of Toyota's initial SW20 design, including the handling characteristics that led to subsequent revisions.

Type II (December 1991–October 1993) brought the biggest early chassis changes. Toyota revised the suspension geometry and braking system, replacing the original 14-inch wheel arrangement with 15-inch wheels and revised front and rear tyre specifications. GT-S joined the turbocharged range, while suspension equipment and damper specifications should be checked against the relevant Japanese production revision.

Type III (October 1993–June 1996) is the version many people picture when they think of the SW20. The round rear lights, redesigned spoiler and increased engine outputs transformed its appearance and performance. Turbo models now produced 245 PS, while naturally aspirated manuals reached 180 PS.

Type IV (June 1996–December 1997) introduced standard driver and passenger airbags and sports ABS across the Japanese range. Toyota also revised the exterior lighting, introduced green-tinted glass and updated the wheel designs.

Type V (December 1997–August 1999) brought the final development of the naturally aspirated engine. The VVT-i 3S-GE produced 200 PS, while GT and GT-S retained their 245 PS turbo engines. A larger, adjustable rear spoiler, five-spoke wheels and revised interior details completed the last Japanese MR2.

These revisions are also important when identifying modified SW20s. Later bumpers, round rear lights and a Type V spoiler can all be fitted to an earlier SW20. The original production period still determines which engine, chassis and safety specifications the car left Toyota with.


Japanese Toyota MR2 20 Series grades

Toyota kept the SW20's Japanese grade structure relatively straightforward. G and G-Limited formed the naturally aspirated range, while GT and the later GT-S carried the 3S-GTE turbocharged engine. Unlike some contemporary Japanese sports cars with numerous overlapping performance grades, the MR2's main distinctions were closely tied to its engine and equipment specification. G was the simpler naturally aspirated model, while G-Limited added more comfort and convenience equipment. GT combined the turbo engine with a higher standard specification, while GT-S offered the same performance with a less elaborate equipment package.

Toyota also produced two particularly interesting G-Limited special editions. The 1991 Super Edition concentrated on distinctive colours and interior materials, while the 1995 Bilstein Package added a specific suspension setup to the naturally aspirated car.

The removable T-bar roof was a body specification available across the range, not a separate performance grade. Specialist vehicles such as the Toyota Technocraft MR Spider also need to be distinguished from regular factory production models.


G

G was the entry point to the Japanese SW20 range when production began in October 1989. Despite its position below G-Limited, it used exactly the same naturally aspirated 1,998 cc 3S-GE engine, initially producing 165 PS. A five-speed manual or four-speed ECT-S automatic was available. Toyota kept the equipment specification relatively simple, with manual steering on the original basic configuration and fewer convenience features than the higher grades. The original manual G weighed approximately 1,160 kg, making it the lightest version of the second-generation MR2 at launch.

The appeal of G is the combination of the SW20 chassis and naturally aspirated 3S-GE without the additional weight or complexity of the turbocharger. Its character changed as Toyota developed the engine, particularly with the introduction of the 180 PS manual specification in 1993 and the final 200 PS VVT-i engine in 1997. A late Type V G manual is therefore quite a different proposition from a 1989 automatic, despite sharing the same grade name. Original gearbox specification and engine revision deserve particular attention when comparing examples.


G-Limited

G-Limited was the more comprehensively equipped naturally aspirated MR2 and one of the main grades throughout Japanese SW20 production. It shared the G's 3S-GE engine and offered both manual and automatic transmissions, but added equipment such as power steering, upgraded interior trim and additional comfort features. Early G-Limited models also received Toyota's distinctive steering-linked front fog lamps and the more elaborate rear spoiler arrangement. Fixed-roof and T-bar configurations were available, making G-Limited one of the most varied specifications in the range.

G-Limited's engine and equipment specifications changed during production without ever becoming a turbocharged model. The original 165 PS car was a relatively refined two-seat sports coupe, while the final 200 PS VVT-i manual offered substantially stronger naturally aspirated performance. The 1993-onwards engine revisions are particularly attractive to enthusiasts who enjoy a high-revving Toyota twin-cam without the heat and additional mechanical complexity of the 3S-GTE. Original interior equipment, factory wheels and the condition of any T-bar roof seals are worth considering alongside engine and gearbox maintenance.


G-Limited Super Edition

Toyota introduced the G-Limited Super Edition in April 1991 as a special version of the naturally aspirated SW20. It was based specifically on the G-Limited T-bar roof and retained the original 165 PS 3S-GE engine, with five-speed manual or four-speed automatic transmission. Its distinctive feature was the factory Bluish Grey Argentum Mica exterior finish, combined with a specially trimmed interior featuring partial leather and Ecsaine upholstery. Toyota's original Japanese list prices were ¥2,444,000 for the five-speed manual and ¥2,537,000 for the four-speed automatic.

The Super Edition belongs to the earliest SW20 production period, before Toyota introduced the substantial December 1991 suspension changes. It therefore retains the original Type I mechanical specification despite its more exclusive appearance. This distinction gives the edition an interesting place in MR2 history: it is a special factory interpretation of the original naturally aspirated car, not a mechanically upgraded Type II. The unusual paintwork and interior materials are central to its identity. A complete original example has a very different attraction from a regular G-Limited that has simply been repainted or fitted with later accessories.


G-Limited Bilstein Package

The G-Limited Bilstein Package arrived in January 1995 as a special edition commemorating the MR2's tenth anniversary. Based on the Type III G-Limited, it combined the naturally aspirated 3S-GE with a specifically tuned Bilstein suspension package, distinctive silver metallic exterior treatment and dedicated aluminium scuff plates. The five-speed manual produced 180 PS, while the four-speed automatic was rated at 170 PS. Toyota offered both transmissions, with original Japanese list prices of ¥2,337,000 for the five-speed manual and ¥2,430,000 for the four-speed automatic.

What makes the Bilstein Package particularly interesting is that Toyota applied a more focused suspension specification to the naturally aspirated car rather than reserving it exclusively for GT and GT-S. The edition offers a different interpretation of the SW20, concentrating on chassis response without the turbocharged engine's additional power. Its original dampers are an important part of that specification, although many surviving cars have received replacement suspension over the past three decades. Factory identification, the original wheels and the dedicated interior and exterior details help distinguish a genuine Bilstein Package from a regular G-Limited fitted with aftermarket Bilstein components.


GT

GT was the original flagship of the Japanese SW20 and the only turbocharged grade when the second generation arrived in October 1989. Its 1,998 cc 3S-GTE produced 225 PS and 304 Nm, delivered through a five-speed manual gearbox to the rear wheels. Compared with the naturally aspirated cars, GT received the stronger turbo drivetrain, additional performance equipment and a more comprehensive interior specification. Features included power steering, steering-linked fog lamps and Toyota's higher-grade audio equipment. The original GT weighed approximately 1,240 kg with the fixed roof.

The GT's reputation grew considerably after Toyota revised the car in December 1991 and again in October 1993. The first update addressed the chassis and braking system, while the second increased engine output to 245 PS. Later GT models also benefited from factory Bilstein dampers, revised suspension settings and improved safety equipment. These differences make the production period especially relevant. An original Type I GT has a noticeably different character from a late Type V, even though both use the 3S-GTE and carry the same badge. The condition of the turbocharger, cooling system, intercooler arrangements and original engine management can be particularly revealing on cars that have previously been tuned.


GT-S

GT-S joined the Japanese range in December 1991, providing a less extensively equipped alternative to the GT without sacrificing the turbocharged engine. It used the same 3S-GTE, initially producing 225 PS, and retained the five-speed manual gearbox, rear-wheel drive and performance-oriented chassis specification. Toyota reduced some of the convenience and audio equipment to create a more affordable turbo model. Later Japanese catalogue specifications identify GT-S with a radio-less six-speaker arrangement, while GT retained additional audio equipment and steering-linked fog lamps.

The appeal of GT-S lies in its relatively straightforward factory specification. It is sometimes described as the more driver-focused turbo MR2, although it was not a separate homologation or competition model. Mechanically, GT-S followed the same major developments as GT, gaining the 245 PS engine in October 1993 and the subsequent chassis and safety revisions. A late Type V GT-S therefore offers the full factory turbo performance with fewer luxury features than the equivalent GT. Its original specification is especially worth establishing because aftermarket stereos, wheels, seats, suspension and bodywork are common. The difference between GT and GT-S is principally factory equipment, not a different turbocharger or higher-output engine.


Toyota Technocraft MR Spider

Toyota Technocraft produced the MR Spider as a limited-volume open-top SW20 conversion. Introduced in February 1996, it was produced by Toyota Technocraft as a specially converted open-top MR2 rather than a normal factory grade. The conversion involved removing the fixed roof from a naturally aspirated SW20 and providing a lightweight open-top arrangement with a simple weather cover.

Unlike the regular T-bar roof, which retained the central roof structure, the MR Spider created a much more open cabin. Japanese specialist records identify 92 vehicles built, including three prototypes, with 89 customer cars produced across the later SW20 revisions. Its rarity makes it historically fascinating, although the altered body structure, specialised roof components and limited parts availability mean it should be approached differently from an ordinary G or G-Limited.

The MR Spider belongs in the history of the Japanese MR2, but it should not be confused with a mass-produced Toyota roadster or a standard SW20 fitted with an aftermarket convertible conversion.

Toyota MR2 FAQ


What should be inspected before bidding on a Toyota MR2 at a Japanese auction?

An MR2 needs more attention than a standard auction sheet and a collection of exterior photographs. Before bidding, request a translation of the inspector's comments, the complete damage diagram and photographs of the underside, engine bay, suspension mounting points and both luggage compartments. These areas can reveal problems that are difficult to identify from the usual front, rear and interior images.

An independent inspection is particularly worthwhile for expensive AW11 Supercharger and SW20 GT or GT-S examples. Where access permits, ask for a cold start, confirmation that the engine reaches operating temperature correctly, checks for fluid leaks and a closer look at previous repairs. Not every Japanese auction permits mechanical testing or a road test, so establish what can actually be inspected before setting your maximum bid.

Can I import a Toyota MR2 into Ireland and pay just €200 VRT?

Yes, provided the individual MR2 is more than 30 years old when registered in Ireland and qualifies under Revenue's vintage vehicle rules. All Japanese AW10 and AW11 models have already passed that threshold. The SW20 requires more attention because Japanese production continued until August 1999. As of November 2026, a 1995 example is old enough, while a car first registered in 1998 must wait until 2028 to reach the qualifying age.

The important date is the vehicle's verified age at Irish registration, not simply the model year advertised by a Japanese seller. For example, a November 1996 registration will need to pass its 30-year anniversary before qualifying. The €200 figure refers only to VRT. It does not include shipping, customs duty, Irish VAT or the other expenses involved in importing an MR2 from Japan.

Where should an inspector look for hidden corrosion on an AW11 or SW20?

On the first-generation AW11, the front crossmember behind the bumper deserves particular attention. Corrosion can also develop around the pop-up headlight housings, front luggage compartment, windscreen surround, wheel arches, sills and jacking points. The body may look presentable in photographs while rust is developing beneath its original underseal or behind exterior trim.

The SW20 has different areas of concern, particularly the rear sills, inner wheel arches, lower rear quarters, boot floor and suspension mounting areas. Moisture trapped behind sill panels can allow corrosion to spread internally before it becomes obvious outside. Ask for photographs with the car raised on a lift, preferably with the relevant underbody areas clearly visible. Fresh black underseal should not be accepted as evidence that the metal underneath is sound.

Does a Japanese auction grade 4 or 4.5 mean an MR2 is a safe purchase?

Not necessarily. An auction grade can be useful when comparing Japanese cars, but it does not establish the mechanical condition of a 35-year-old MR2. A tidy SW20 with an attractive exterior may still have tired suspension bushes, a neglected cooling system or evidence of previous turbocharger problems. Likewise, a lower-grade AW11 with cosmetic imperfections may have a well-maintained engine and sound original structure.

Read the Japanese inspector's comments before concentrating on the numerical grade. Pay close attention to corrosion remarks, replacement panels, repair history and the damage diagram. For an MR2, evidence of accident repair around the rear quarters, suspension mounting areas or engine compartment deserves particular investigation. A clean auction sheet is useful supporting evidence, not a substitute for a specialist inspection.

Why is the MR2 cooling system particularly important when buying from Japan?

The MR2's mid-engined arrangement means the engine sits behind the occupants while the radiator is mounted at the front. Long coolant pipes connect the two, creating a system that needs to be properly maintained and carefully bled after repairs. Air trapped in the system, deteriorating hoses, radiator corrosion or previous overheating can cause problems that are not immediately obvious during a brief engine start.

On an SW20 turbo, particular attention should also be given to the coolant hoses around the 3S-GTE, including the difficult-to-access hoses commonly called the hose from hell. Where possible, arrange a cooling-system pressure test and check for unexplained coolant loss, leaks or signs of previous overheating. Replacing an inexpensive hose can become a substantial job because of its location. This is worth investigating before purchasing a car thousands of kilometres away.

Is a low-mileage Japanese MR2 always worth paying more for?

A low-mileage AW11 or SW20 can be particularly desirable, especially when its original interior, bodywork and factory equipment have survived in excellent condition. However, an MR2 that has covered very few kilometres over the last decade may need significant recommissioning. Rubber hoses, coolant seals, timing belts, brake components, tyres and fuel-system parts deteriorate with age regardless of how little the car has been driven.

Ask when the car was last serviced and whether it has been used regularly or kept in long-term storage. Japanese maintenance records, shaken inspection history and previous auction records can help establish how the mileage accumulated. A documented 100,000 km SW20 that has been driven and maintained regularly may be a more sensible purchase than a 35,000 km example that has spent years standing unused.

How can I confirm that a Japanese SW20 is a genuine GT or GT-S turbo?

The SW20 chassis designation does not, by itself, identify whether the car originally had a naturally aspirated 3S-GE or turbocharged 3S-GTE. Japanese GT and GT-S models were factory turbocharged, while G and G-Limited were naturally aspirated. Engine conversions are possible, so an advertised 3S-GTE does not automatically prove that the vehicle left Toyota as a turbo model.

Request the original Japanese grade and model-code information, and compare it with the engine, gearbox and factory equipment. The turbocharged SW20 used the stronger E153 manual transaxle, while naturally aspirated manual models used the S54. A car advertised as a GT-S should have documentation supporting that identity, particularly if it carries later bodywork or extensive modifications. A converted G may still be an enjoyable MR2, but it should not be represented or valued as an original GT-S.

Should I avoid importing a Toyota MR2 with a T-bar roof?

Not automatically. The removable T-bar panels are part of the appeal of both MR2 generations, particularly for owners who enjoy driving their cars during the warmer months. However, ageing rubber seals, incorrect panel alignment and blocked drainage channels can cause water ingress. A Japanese car that appears dry when photographed may never have been tested in conditions comparable to a wet Irish winter.

Inspect the roof seals around both panels, the windscreen header and the rear roof junctions. Look for damp carpets, stained interior trim, corrosion beneath the seats and evidence of previous seal repairs. If possible, request a controlled water test. Replacement seals and associated trim can be difficult or expensive to source, so a well-preserved factory T-bar roof is worth paying attention to before bidding.

What costs should I calculate beyond the Japanese purchase price of an MR2?

The advertised retail price or winning auction bid is only the beginning. The final Irish cost can include Japanese auction or dealer charges, inland transport to the export port, documentation, shipping, marine insurance, customs clearance, applicable customs duty, Irish VAT, VRT and registration-related expenses. Currency movements between agreeing the purchase and paying Japanese invoices can also affect the final figure.

The MR2's age makes this calculation particularly interesting. An eligible classic can attract the €200 vintage VRT charge, but that does not automatically remove other import taxes. A later SW20 that has not yet reached the 30-year threshold may have a substantially different VRT liability. Before committing to a car, obtain an estimate based on its actual purchase price, shipping arrangements, import classification and expected Irish registration date.

What mechanical checks are specific to the supercharged AW11 and turbocharged SW20?

For an AW11 equipped with the 4A-GZE, the SC12 supercharger deserves a proper assessment. Check for unusual mechanical noises, oil leaks, belt condition and evidence that the induction system has been altered. The supercharger clutch and associated components should operate correctly. A car fitted with an aftermarket pulley or altered boost arrangement needs additional investigation, particularly if the seller cannot provide evidence of the work carried out.

The SW20's 3S-GTE presents different concerns. Inspect the turbocharger for excessive shaft play where accessible, oil leakage, unusual smoke and evidence of overheating. Ageing coolant hoses, exhaust manifold leaks, intercooler pipework and previous boost modifications also deserve attention. A brief idle video cannot establish the condition of either engine under load. Where a proper mechanical inspection is not permitted, that uncertainty should be reflected in the maximum price you are prepared to pay.

Should I import an original MR2 or one already modified in Japan?

That depends on the work carried out and the condition of the original car beneath it. Japan has a long history of modifying the SW20, and examples fitted with aftermarket exhausts, coilovers, wheels, upgraded intercoolers and engine-management systems are common. A properly developed car with documented parts and professional installation can be attractive, particularly to someone who wants a particular driving setup rather than a factory-standard example.

Problems arise when modifications conceal earlier damage, poor workmanship or incompatible components. Lowered suspension can make structural inspection harder, while altered wheel widths and tyre sizes can affect the MR2's handling balance. For an Irish buyer, insurance acceptance, roadworthiness and NCT requirements should also be considered before purchase. An original GT-S and a heavily modified 3S-GTE car may offer similar performance, but they carry very different ownership and maintenance considerations.

Before you import 


Start by identifying the chassis code, production month, original grade and engine. On an AW11, establish whether the car left Toyota with the naturally aspirated 4A-GE or supercharged 4A-GZE. For the SW20, determine which of the five production revisions it belongs to, particularly if you are considering a GT or GT-S.

Structural condition deserves particular attention. Inspect the sills, wheel arches, floor, suspension mounting points and evidence of previous accident repairs. Cooling-system condition, timing-belt history, oil leaks and the health of the turbocharger or supercharger should also be investigated. T-bar roof cars need additional checks for water ingress and deteriorated seals.

Finally, calculate the complete Irish landed cost rather than relying on the Japanese asking price. The production date is especially relevant to VRT, as some SW20s have already reached the 30-year threshold while later examples have not.


Find a Toyota MR2 that meets your requirements


An early 4A-GE AW11, a supercharged G-Limited, a naturally aspirated 200 PS SW20 or a late 245 PS GT-S. Each offers a different side of Toyota's mid-engined history, and finding a good example takes more than choosing a favourite badge.

JDM Direct Ireland can help you explore what's available in Japan, compare genuine factory specifications and understand the likely costs before deciding whether to import.

Explore Japanese MR2 listings and find a specification worth pursuing.


JDM Guides

Looking for more information? Explore our most popular import guides covering costs, VRT, buying advice and everything involved in importing a car from Japan to Ireland.


Japanese auction sheet damage codes are shorthand used by auction inspectors to record visible defects and previous work across a vehicle. Depending on the auction house, markings such as A can indicate scratches, U dents, W signs of paintwork or repair, S rust, C corrosion, while X and XX can identify panels requiring replacement or already...

Choosing the right car isn't just about finding the right make, model or budget. When importing from Japan, the exact specification can dramatically influence what you'll pay by the time the vehicle reaches Ireland. Two cars that appear almost identical may have completely different VRT calculations, running costs and long-term value, because of...

Choosing the best Japanese wheelchair accessible vehicle isn't about buying the most expensive model or the one with the biggest badge. It's about finding the WAV that best suits your mobility requirements, family, passengers and everyday lifestyle. For some buyers, that may be a compact family WAV such as the Toyota Sienta, Honda Freed, Toyota...

The Toyota Chaser JZX100 has quietly become one of Japan's most sought-after performance saloons. Once considered an affordable alternative to the Nissan Skyline, today's best examples are increasingly difficult to find, with clean, original cars attracting strong demand from enthusiasts across Europe, Australia and the United States. As...